Dyson DC15 the ball User Manual

Slide wand down inside hose
until it clicks.

Slot wand into top of machine
and click into place.

Wind cable anti-clockwise and
secure with clip.

Click tools into place.

1 Assembling

IMPORTANT

• Ensure hose is straight when
inserting wand.

• Please see back of manual for
optional accessories.

• If you have any questions,
please call the Dyson Helpline,
or log onto www.dyson.com

Brush tool

Crevice tool

Stair tool

Carrying your Dyson

Ensure machine is upright
before carrying.

Use the carry handle at the
top of the cyclone to lift.

Using your Dyson

Plug in and press ON/OFF
switch.

Press pedal to release cleaner
head and pull handle towards you.

Use pedal only – do not stand
directly on cleaner head.

Ensure stabilising wheels are
fully retracted or brushbar will
not operate.

2 Using your Dyson

IMPORTANT

• Please note: this machine is
intended for domestic use only.
Fine dust such as plaster dust or
flour should only be vacuumed
in very small amounts.

• The brushbar will automatically
stop if it becomes obstructed.

• Do not press the cyclone release
button while carrying the
machine or it could fall and
cause injury.

• Ensure the cyclone is secured to
the machine.

• Do not shake the machine while
carrying or it could fall and
cause injury.

Brush control

Press button to turn brushbar
OFF for delicate rugs, looped
carpets and hard floors. Press
again to restart for carpets.

Using DC15

Small movements of the wrist will create a zigzag motion in the head,
for easier cleaning around furniture.

When finished, push machine
into an upright position to
drop stabilising wheels.

Ensure wheels are fully
locked in place before
letting go of the cleaner.

3 Using your Dyson

IMPORTANT

• The brushbar will be set to the

ON position every time you

start the vacuum.

• If the brushbar stops during
use, please refer to the
blockages section.