ASSEMBLY GUIDE
DX-TVM113
Slim-Profile TV Wall Mount
Safety information and specifications . . . . . . . . . 2
Tools needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Package contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . 4
For wood-stud, solid concrete, or concrete block installations
Before using your new product, please read these instructions to prevent any damage.
2 |
DX-TVM113 |
Safety information and specifications |
Safety information and specifications
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
CAUTION: Do not use this product for any purpose not explicitly specified by Dynex. Improper installation may cause property damage or personal injury. If you do not understand these directions, or have
doubts about the safety of the installation, contact Customer Service or call a qualified contractor. Dynex is not responsible for damage or injury caused by incorrect installation or use.
The weight of your TV must not exceed 100 lbs. (45 kg). The wall must be capable of supporting five times the weight of your TV and wall mount combined.
This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children!
Maximum TV weight: 100 lbs. (45 kg)
Screen size: 40 in. to 56 in. diagonal
Overall dimensions (H × W ):
16.7 × 27.3 in. (42.5 × 69.3 cm)
Wall-mount weight: 7 lb
We’re here for you www.dynexproducts.com For customer service, call:
800-305-2204 (U.S./Canada markets)
Tools needed
You will need the following tools to assemble your new TV wall mount:
Edge-to-edge stud |
Pencil |
finder |
Phillips screwdriver
Tape
Measuring tape
Level
Drill
Socket wrench with 1/2" (13 mm) socket or adjustable wrench
Hammer
7/32" (5.5 mm) wood drill bit for wood stud wall
OR
1/2" (13 mm) masonry drill bit (concrete only)
Package contents |
DX-TVM113 |
3 |
Package contents
Make sure that you have all the hardware necessary to assemble your new TV wall mount: A Wall Plate (1)
B Left TV Bracket (1)
C Right TV Bracket (1)
R Wall Plate Template (1)
A B C R
DX-TVM113 Wall Plate Template • Gabarit • Plantilla
Top
Haut
Parte superior
Tools Needed
Outils nécessaires
Herramientas requeridas
Need more information about your mount? Scan this QR code or visit www.dynexproducts.com. <FR>Need more information about your mount? Scan this QR code or visit www.dynexproducts.com. <SP>Need more information about your mount? Scan this QR code or visit www.dynexproducts.com.
Top
Haut
Parte superior
Note: For wood frame installations, use a stud finder to locate wood studs first.
Remarque : Pour une construction à ossature de bois, localiser d'abord les montants en bois, à l'aide d'un détecteur de montants. Nota: para la instalación en construcciones de armazón de madera, primero debe localizar las vigas de madera con un localizador de vigas.
TV Hardware Bag
Label |
Hardware |
Qty. |
|
D |
M4 × 12 mm |
4 |
|
screw |
|||
|
|
||
E |
M4 × 30 mm |
4 |
|
screw |
|||
|
|
||
F |
M4 washer |
8 |
|
G |
M6/M8 washer |
4 |
|
H |
M4 spacers |
4 |
|
I |
M6 × 12 mm |
4 |
|
screw |
|||
|
|
||
J |
M6 × 20 mm |
4 |
|
screw |
|||
|
|
||
K |
M6 × 35 mm |
4 |
|
screw |
|||
|
|
Label |
Hardware |
Qty. |
|
L |
M8 × 16 mm |
4 |
|
screw |
|||
|
|
||
M |
M8 × 40 mm |
4 |
|
screw |
|||
|
|
||
N |
M6/M8 spacers |
4 |
|
O |
Lag bolt washer |
4 |
|
P |
|
4 |
|
|
5/16" × 2 1/2" lag bolt |
|
|
Q |
Concrete anchor |
4 |
1 |
|
|
|
2 |
|
|
|
3 |
|
|
|
|
|
|
4in |
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10 |
20 |
30 |
40 |
50 |
60 |
70 |
80 |
90 |
100mm |
4 |
DX-TVM113 |
Installation instructions |
Installation instructions
STEP 1 - Determine wall-mount location
Note:
•For more detailed information on determining where to drill your holes, visit our online height-finder at: http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder
•Your TV should be high enough so your eyes are level with the middle of the screen. Normally, 40 to 60 inches from the ground.
The center of your TV will match the center of the wall plate (A). Before you drill holes in the wall:
1Measure the distance from the bottom of your TV to the middle (half of the height of the TV). This is measurement a.
2Measure the distance from the floor to where you want the bottom of the TV to be placed on the wall. Keep in mind that the bottom of the TV should be placed above any furniture (such as entertainment centers or TV stands). The TV should also be above items placed on top of the furniture (like a Blu-ray player or cable box). This measurement is b.
3Add a + b. The total measurement is the height where you want the center of the wall plate to be on the wall.
4Use a pencil to mark this spot on the wall.
a |
A |
b
B
You’ll need
Measuring tape |
Pencil |
|
|
|
|
Loading...