Dynexproducts DX-PU98505 Quick Setup Guide
DX-PU98505
USB to Ethernet Adapter
Thank you for purchasing this high quality
Dynex USB to Ethernet Adapter. Use this
adapter to instantly connect to a 10/100 Mbps
network from the USB port on your desktop or
laptop computer.
PACKAGE CONTENTS
• USB to Ethernet Adapter
• Driver CD
• Quick Setup Guide
SETTING UP THE ADAPTER
Notes:
• Install the driver software before using the adapter.
Use the included driver CD to install the driver
before you connect the adapter.
• If you have Windows 8, you do not need to use the
driver CD. The driver will be installed automatically
when you connect with your adapter. Skip to step 4.
• If your computer does not have a disc drive,
you can download the driver from
www.dynexproducts.com. Search for your
model number (DX-PU98505) to nd the
driver on the product page. Or, attach an
external disc drive to your computer.
To install on a Windows PC:
1 Insert the driver CD into the disc drive on your
computer. The software should run
automatically. The initial installation screen
opens.
Note: If the software does not run automatically,
locate and double-click Run.exe on the driver CD.
2 Click on your operating system, then follow
on-screen instructions.
3 When the installation is complete, click
Finish. You will be prompted to restart your
computer to nish the installation.
4 Connect the USB connector on the adapter
to an open USB port on your computer.
5 Connect a network cable to the Ethernet
port on the adapter.
To install on a Mac:
1 Insert the driver CD into the disc drive of
your computer.
2 Locate and click the AX88772 icon ( ),
then click AX88772.dmg. The driver setup
dialog box opens.
SYSTEM REQUIREMENTS
• Windows® 8.1, Windows® 8, Windows® 7,
Windows Vista®, Windows® XP, or Mac OS
10.4.x or higher
Before using your new product,
please read these instructions to prevent any damage.
QUICK SETUP GUIDE
3 When the installer screen opens, click
Continue, then follow the on-screen
instructions.
You may be prompted to enter your system
username and password during installation.
4 Click Install, then when the conrmation
message appears, click Continue
Installation.
5 When installation is complete, click Restart to
restart the computer and nish the installation.
6 Connect the USB connector on the adapter to
an open USB port on your computer.
7 Connect a network cable to the Ethernet port
on the adapter.
TROUBLESHOOTING
My computer does not detect the network
• Make sure that all of the cables and plugs are securely connected.
• Make sure that the USB connector and network cable are not broken.
• Try using another USB port on the computer.
• Check for motherboard compatibility issues.
• Check for driver compatibility issues.
• Make sure that your network is working correctly.
• Make sure that the driver is installed on your computer.
I do not see the additional driver in my system
• Make sure that the USB connector and network cable are not broken.
• Make sure that the driver is installed correctly by selecting (for
Windows) Start>Control Panel>Device Manager>Network
Adapters or (for Mac) Hardware>USB>USB Hi-Speed
Bus>Hub>AX88772C. Look for a string such as ASIX AX88772B USB
2.0 to Fast Ethernet Adapter.
• Install the driver again according to the installation steps in the QSG.
• Shut down your rewall in case your anti-virus program is preventing
the installation of the driver software.
• Check for motherboard compatibility issues.
• Check for driver compatibility issues.
LEGAL NOTICES
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
ICES-003
This Class B digital apparatus complies with Canadian ICES-003;
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
ONEYEAR LIMITED WARRANTY
Visit www.dynexproducts.com for details.
CONTACT DYNEX:
For customer service, call 800-305-2204 (U.S. and
Canada) or 01-800-926-3020 (Mexico)
www.dynexproducts.com
DYNEX is a trademark of Best Buy and its aliated companies.
Registered in some countries. Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
V1 ENGLISH 14-0900
Loading...