Dynex DX-NBKIT20 User Manual
DX-NBKIT20-combo.fm Page 1 Friday, May 6, 2005 4:46 PM
Notebook Kit
Accessoires pour ordinateur portatif
Kit para Notebook
DX-NBKIT20
USER GUIDE • GUIDE DE L’UTILISATEUR • GUÍA DEL USUARIO
DX-NBKIT20-combo.fm Page 2 Friday, May 6, 2005 4:46 PM
2
Contents
Components..................................................................................................2
Using the USB 2.0 4-port hub........................................................................2
Using the mini RF optical mouse...................................................................6
Using the notebook surge protector............................................................10
Français ............................................................. 21
Español .............................................................. 42
© 2005 Dynex. DYNEX and the DYNEX logo are trademarks of Best Buy Enterprise
Services, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. Specifications and features are subject to
change without notice or obligation.
Components
The notebook kit is comprised of the following products:
• USB 2.0 4-port hub (model: KITHUB)
• Mini RF optical mouse (model: KITWOM)
• Notebook surge protector (model: KITNBS)
• Retractable RJ45 cable (model: KITRJ45)
Using the USB 2.0 4-port hub
Components
Introduction
The Dynex USB 2.0 4-port hub allows you to add multiple high-performance
USB 2. 0 and USB 1.1 peripheral devices to your computer.
S
AFETY INSTRUCTIONS
• Always read the safety instructions carefully.
• Keep the user guide for reference.
• Keep your hub away from water and humidity.
• Place the hub on a flat surface when setting it up.
• Contact a service technician if any of the following occurs:
• The hub has been exposed to moisture.
• The hub has been dropped or damaged.
• The hub shows obvious sign of breakage.
• The hub is not working as documented in this user guide.
DX-NBKIT20-combo.fm Page 3 Friday, May 6, 2005 4:46 PM
Using the USB 2.0 4-port hub
Features
• Compliant with Universal Serial Bus Specification Revision 2.0 (data rate
1.5/12/480 Mbps)
• Connects up to 127 USB devices (with multiple USB hubs)
• Bus power and self-power modes
• Plug-and-play
• 1 upstream and 4 downstream USB ports included
• Over-current detection and protection
• 1 red LED power indicator
System requirements
• Desktop or notebook computer with USB port
• One of the following operating systems (no driver needed):
• Windows® 98/SE or newer
•Mac™ OS X
Installing the USB hub
To instal l the h ub:
1 Optional: Connect the power adapter (not included) to the power jack on
the hub. For more information, see “Power adapter” on page 5.
3
2 Plug the cable into the type A connector on the computer.
3 Optional: Plug the power adapter into an AC power outlet.
After you connect this hub to a computer, the computer detects the hub and
installs the required drivers.
DX-NBKIT20-combo.fm Page 4 Friday, May 6, 2005 4:46 PM
4
VERIFYING INSTALLATION IN WINDOWS
After installation is finished, go to the Device Manager to verify the completed
installation.
Note: Windows Me cannot identify the USB hub’s brand and the Device Manager
shows a green question mark next to the hub’s icon. This does not affect how the
hub functions.
ERIFYING INSTALLATION IN MACINTOSH OS X
V
After installation is finished, go to Apple System Profiler\Devices and Volumes\USB to verify the completed installation.
Using the USB 2.0 4-port hub
DX-NBKIT20-combo.fm Page 5 Friday, May 6, 2005 4:46 PM
Using the USB 2.0 4-port hub
Troubleshooting
If the hub experiences an excessive current, over-current protection disconnects
power from the port. The USB Hub Current Limit Exceeded dialog box opens.
To reset the hub:
•Click Reset.
Or, unplug the USB cable, then plug it back in.
5
USB Hub
Specifications
Por ts ......................................................................... 1 upstream and 4 downstream
Compliance......................................................................... FCC; CE emissions
Power.......................................... Bus power: 5V 500mA; Self power: 5V 2.5A
Storage temperature.....................................................-14-185°F (-10-85°C)
Working temperature ........................................................32-104°F (0-40°C)
P
OWER ADAPTER
Your USB hub has a power jack for connecting to an AC adapter. If you want to purchase an AC adapter it should have the following specifications:
Input: 100-240v 50 Hz-60 Hz; Output: 5V 2.5A
DX-NBKIT20-combo.fm Page 6 Friday, May 6, 2005 4:46 PM
6
Using the mini RF optical mouse
Using the mini RF optical mouse
Introduction
This mini radio frequency (RF) optical mouse uses digital radio technology to connect with your computer.
Setting up your mouse
INSTALLING THE BATTERIES
To install the batteries:
1 Press the tab on the bottom of the mouse, then remove the cover.
2 Insert the batteries as shown on the diagram inside the battery compart-
ment.
3 Replace the cover.
NSTALLING THE RECEIVER
I
To install the receiver:
• Plug the receiver into your computer’s USB port.
E
STABLISHING A CONNECTION
To set up a connection between the mouse and receiver:
1 Push the small on/off switch on the mouse to the On position. The optical
mouse sensor turns red.
DX-NBKIT20-combo.fm Page 7 Friday, May 6, 2005 4:46 PM
Using the mini RF optical mouse
2 Press the ID Switch button on the bottom of the mouse.
ID Switch
button
3 Press the ID Switch button on the receiver.
7
ID Switch
button
If you successfully establish a connection between the mouse and the
receiver, the indicator on the receiver flashes several times. If the connection is not established successfully, repeat the above steps.
DX-NBKIT20-combo.fm Page 8 Friday, May 6, 2005 4:46 PM
8
The indicator on the receiver shows the connection status.
Flashing at 0.5-second intervals Searching for a connection.
Flashing Connection is established.
Solid No connection.
Using your mouse
TURNING THE MOUSE ON AND OFF
To turn the mouse on and off:
• Push the small on/off switch on the mouse.
U
SING THE MOUSE WHEEL
Your mouse has a wheel that functions both as a Windows scroll wheel and as a
customized button. To use it as a standard mouse button, click (press down) the
wheel. To scroll the screen, rotate the wheel.
Using the mini RF optical mouse
Receiver
indicator
Indicator Meaning
If your desktop surface is red, transparent, or highly reflective, the optical sensor
in the mouse may not work properly. If the mouse does not work as expected, try
using the mouse on a mouse pad or a different desktop surface.
DX-NBKIT20-combo.fm Page 9 Friday, May 6, 2005 4:46 PM
Using the mini RF optical mouse
Troubleshooting
Problem Solution
Mouse does not work • Make sure that the on/off switch on the mouse is in the On
Mouse is not detected • Make sure that the receiver is plugged into a USB por t.
Mouse pointer does
not move properly
position.
• Adjust the angle of the receiver.
• Make sure that the batteries are installed correctly.
• Try using a non-reflective mouse pad.
• Repeat the procedure for establishing a connection.
• Make sure that the USB port is configured correctly.
• Check your computer’s device manager for resource conflicts.
• Adjust the angle of the receiver.
• Make sure that the batteries are installed correctly.
• Try using a non-reflective mouse pad.
• Repeat the procedure for establishing a connection.
9
DX-NBKIT20-combo.fm Page 10 Friday, May 6, 2005 4:46 PM
10
Using the notebook surge protector
Using the notebook surge protector
Introduction
Protect your notebook from unnecessary damage with this compact travel surge
protector.
S
AFETY INSTRUCTIONS
• Always read the safety instructions carefully.
• Do not open the surge protector. There are no user-serviceable parts inside.
• Do not insert foreign objects into the outlet.
• Keep the user guide for reference.
• Keep your surge protector away from water and humidity.
• This product is designed for use in countries with 120 VAC electrical service.
• Before installing the surge protector, turn off and unplug all equipment
that will be protected.
Identifying components
Surge protection indicator
Power indicator
Male 2-prong to female
3-prong adapter
Female
2-prong to
male 3-prong
adapter
3-prong connector
ACCESSORIES
Your surge protector includes the following accessories:
• 1—female two-prong to male three-prong adapter
• 1—male two-prong to female three-prong adapter
• 1— telephone cable
DX-NBKIT20-combo.fm Page 11 Friday, May 6, 2005 4:46 PM
Using the notebook surge protector
Installing the surge protector
To install the surge protector:
1 Turn off and unplug the notebook to be protected.
2 Unplug the power cord from the notebook power adapter.
3 Examine the power cord plug that connects to the power adapter.
Two -pro ng
connector
If the notebook power adapter uses a three-prong connector, go to step 4.
OR, if the notebook power adapter uses a two-prong connector, plug the
provided two to three-prong adapters into both ends of the surge protector.
4 Plug the surge protector into the notebook power adapter, then plug the
notebook power cord into the surge protector.
Three-prong
connector
11
DX-NBKIT20-combo.fm Page 12 Friday, May 6, 2005 4:46 PM
12
Using the notebook surge protector
5 If you use a dial-up modem, disconnect the telephone cable from the wall
and plug it into the notebook surge protector jack labeled OUT.
Out
In
6 Plug one end of the supplied telephone cable into the wall telephone jack
and plug the other end into the notebook surge protector jack labeled IN.
Understanding the indicators
The Power indicator is green when power is turned on.
The Surge indicator is red when surge protection is turned on.
Troubleshooting
Problem Solution
No dial tone • Make sure that the telephone cables are fully inserted into
the correct jacks.
Network is
disconnected
Green power indicator
and red surge
indicator are not on.
Green power indicator
is on, but red surge
indicator is not on.
• Make sure that the network cables are fully inserted into the
correct jacks.
• Make sure that the outlet has power and the power cord is
plugged in.
• Contact technical support.
• Contact technical support.
DX-NBKIT20-combo.fm Page 13 Friday, May 6, 2005 4:46 PM
FCC Radio Frequency Interference Statement
FCC Radio Frequency Interference
Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio or TV technician for help.
Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Canadian Notice
13
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Avis Canadien
Cet appareil numérique de la Class B respecte toutes les exigences du Règlement
sur le matériel brouilleur du Canada.
DX-NBKIT20-combo.fm Page 14 Friday, May 6, 2005 4:46 PM
14
LIMITED WARRANTY
By purchasing a Dynex Model KITNBS Notebook Surge Protector in the United
States or Canada, the original end-user consumer purchaser (referred to as the
“Initial Customer”) receives a Limited Warranty and a Connected Equipment Guarantee.
Limited Warranty. The Initial Customer receives the limited warranty explained
below (referred to as the “Limited Warranty”) for the Dynex CPS500NBP Notebook
Surge Protector (referred to as the “Surge Suppressor”).
Connected Equipment Guarantee. Dynex provides the Initial Customer with limited additional protection in the event that the Surge Suppressor is defective in
materials or workmanship and certain equipment plugged into the Surge Suppressor is damaged.
This Limited Warranty and Connected Equipment Guarantee gives you specific
rights, and you may have other rights, which vary from State to State or Province
to Province.
LIMITED WARRANTY
Dynex warrants to you, the Initial Customer, that the Surge Suppressor will be free
from defects in material and workmanship for its lifetime, subject to the terms of
this Limited Warranty.
This provision shall NOT create any Implied Warranty or Merchantability or of Fitness for a Particular Purpose that would not otherwise apply to the Surge Suppressor. The Limited Warranty does not cover or apply to: misuse, modification,
operation or storage outside environmental limits of the Surge Suppressor, a
Surge Suppressor in transit, in shipment, or in storage, improper operation or
maintenance, or use with items not designed or intended for use with the Surge
Suppressor. You must contact Dynex within fifteen (15) days of the failure of the
Surge Suppressor in order to make a warranty claim.
XCLUSIVE REMEDIES UNDER LIMITED WARRANTY.
E
Your exclusive remedy and Dynex's sole obligations are as follows for the Surge
Suppressor:
LIMITED WARRANTY
DX-NBKIT20-combo.fm Page 15 Friday, May 6, 2005 4:46 PM
LIMITED WARRANTY
If (a) the Surge Suppressor you purchased and still own is defective in material or
workmanship under this Limited Warranty or any applicable warranty imposed by
law, and (b) all Limited Warranty requirements have been met, Dynex will repair
or replace the Surge Suppressor if it proves to be defective in material or workmanship.
M
AKING A LIMITED WARRANTY CLAIM.
To make a Limited Warranty claim, you must do the following:
1.Provide reasonable proof of purchase (for example, a sales receipt) that establishes you as the Initial Customer (the original end-user consumer purchaser) of
the Surge Suppressor.
2. Call Dynex at (877) 297-6937 (toll free), or write to Dynex at 5555 12th Ave E,
Suite 110, Shakopee, MN 55379, within FIFTEEN (15) days of the failure of the
Surge Suppressor.
3. When you contact Dynex, identify the Surge Suppressor by model number, provide the purchase date, and request Return Materials Authorization (RMA) information from Dynex.
4. Pack and ship the Surge Suppressor to Dynex as instructed in your RMA. Show
the RMA code on the shipping label or include it with the Surge Suppressor. You
MUST prepay all shipping costs and you are responsible for packaging and shipment.
If the Surge Suppressor is defective in material or workmanship, Dynex will repair
or replace the Surge Suppressor and return it to you at Dynex's expense, or, if
Dynex is unable to or decides not to repair or replace the Surge Suppressor (if
defective) within a reasonable time, Dynex will refund to you the full purchase
price you paid for the Surge Suppressor (purchase receipt showing price paid is
required) .
15
CONNECTED EQUIPMENT GUARANTEE
The Initial Customer is protected for the life of the Surge Suppressor against certain losses due to the Surge Suppressor's defective material or workmanship that
is directly and properly connected to electronic equipment (referred to as the
“Connected Equipment”), subject to certain terms and conditions provided below.
The Connected Equipment Guarantee is not “first dollar” coverage.
DX-NBKIT20-combo.fm Page 16 Friday, May 6, 2005 4:46 PM
16
LIMITED WARRANTY
Dynex's obligation is reduced by any amounts that the Initial Customer is entitled
to recover from other sources regarding the Connected Equipment, including
insurance, other warranty, or extended warranty coverage, whether or not the Initial Customer makes a claim for recovery, including but not limited to a claim
under any applicable insurance, other warranty, or extended warranty.
To be covered under the Connected Equipment Guarantee: (a) you must notify
Dynex within fifteen (15) days of the event for which you intend to make the Connected Equipment claim; (b) the Surge Suppressor must have been defective in
material or workmanship and such defect must have directly and proximately
caused the damage; (c) the Connected Equipment must have been damaged by a
transient, spike, or surge (a “Power Disturbance”) on an AC Power Line on properly
installed, grounded, and code-compliant 120 volt power lines in the United States
and Canada, or by a Power Disturbance on a telephone that is properly installed
and connected; and (d) is directly plugged into and properly connected to the
Surge Suppressor in its original condition which is properly operated when a
Power Disturbance passes through the Surge Suppressor and (i) exhausts the protection capacity of the Surge Suppressor or (ii) damages the Surge Suppressor.
Further, the Connected Equipment Guarantee does not apply if the Surge Suppressor has been operated in a failure mode or not in compliance with Dynex operating instructions and manuals, or if the Connected Equipment has not been
operated in compliance with the instructions and manuals of its manufacturer/
vendor.
Dynex's total liability under this Connected Equipment Guarantee is limited to the
Agreed Damage Amount (defined below).
AKING A CONNECTED EQUIPMENT GUARANTEE CLAIM.
M
To make a claim for damage to Connected Equipment under the Connected Equipment Guarantee, you must do the following:
1. Provide reasonable proof of purchase (for example, a sales receipt) that establishes you as the Initial Customer of the Surge Suppressor.
2. Call Dynex at (877) 2797-6937 (toll free), or write to Dynex at 5555 12th Ave E,
Suite 110, Shakopee, MN 55379, within fifteen (15) days of the date of the event
for which you wish to make a Connected Equipment claim.
3. When you contact Dynex, identify the Surge Suppressor (by model number) and
the item(s) of Connected Equipment (by manufacturer and model). Have information on all applicable insurance or other resources of recovery/payment that are
DX-NBKIT20-combo.fm Page 17 Friday, May 6, 2005 4:46 PM
LIMITED WARRANTY
available to the Initial Customer and the name of the power utility supplier for the
location of the Connected Equipment. Dynex will then send you additional
instructions and the appropriate claim forms.
D
YNEX'S DUTIES.
Dynex will inspect and examine the Surge Suppressor and the item(s) of Connected Equipment (or at Dynex's election, your written statement and repair cost
estimate for those item(s)). You must return the Surge Suppressor for inspection.
If the damage to Connected Equipment is covered by the Connected Equipment
Guarantee, Dynex's sole obligation and the Initial Customer's exclusive remedy is:
repair (or pay the cost of repair) or replacement of the Connected Equipment by
Dynex; or at the option of Dynex, as permitted by law, payment by Dynex to the
Initial Customer the Agreed Damage Amount for the Connected Equipment. The
“Agreed Damage Amount” for all items of the Initial Customer's Connected Equipment shall be the lesser of the amount determined under Clause (1) or (2) below,
reduced by any amounts described in Clause (3) below:
1. The fair market value of the Connected Equipment as established by the lower
of (a) the average price the same or similar items are being sold for on eBay, (b)
the price list of Orion Blue Book (or if such price list is no longer published, a published or announced price list reasonably selected by Dynex), or (c) the lowest
price the same or similar items can be purchased for in the United States; or
2. The Aggregate Limit for all Connected Equipment of $75,000, minus:
3. The amount(s) of all payment you have or are entitled to receive from insurance, other warranties, extended warranties, or from other sources or persons for
the Connected Equipment or damage to such equipment so that Dynex's maximum liability shall be reduced to reflect all such other payments or sources of
recovery.
If Dynex replaces the connected equipment or pays the Agreed Damage Amount
to the Initial Customer, the Initial Customer shall transfer all item(s) to Dynex
without warranty by the Initial Customer, but free of lien or other interest.
Dynex reserves the right to inspect the Surge Suppressor, the Connected Equipment, and the site where the event occurred. All costs of shipping the Surge Suppressor and the Connected Equipment to and from Dynex for inspection shall be
borne solely by the Initial Customer. Dynex reserves the right to negotiate the cost
and choose the facility at which any repairs will take place, and Dynex must be
notified and approve any repair facility before any Connected Equipment is serviced. Any repair or modification of the Connected Equipment or Surge Suppressor
by a facility or entity not approved by Dynex voids this Connected Equipment
17
DX-NBKIT20-combo.fm Page 18 Friday, May 6, 2005 4:46 PM
18
Guarantee. If Dynex determines, in its sole discretion, that it is impractical to ship
the damaged equipment to Dynex, Dynex may designate, in its sole discretion, an
equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment to and from such repair facility
and of such estimate shall be borne solely by the Initial Customer. Damaged
equipment must remain available for inspection until the claim is finalized.
Whenever claims are settled, Dynex reserves the right to be subrogated under any
existing insurance policies the claimant may have.
LIMITED WARRANTY
CONDITIONS COMMON TO THE LIMITED WARRANTY
AND THE CONNECTED EQUIPMENT GUARANTEE
While the Limited Warranty and the Connected Equipment Guarantee are separate, they do share the following terms.
The Limited Warranty and the Connected Equipment Guarantee Do Not Apply
Unless The Initial Customer:
1. Has properly connected the Surge Suppressor and the Connected Equipment to
properly wired and grounded outlets (including compliance with electrical and
safety codes of the most current electrical code (ANS/NFPA 70)), without the use
of any adapters, extension cords or other connectors.
2. Has plugged the Surge Suppressor directly into the power source and must not
have “daisy-chained” the Surge Suppressor together in serial fashion with another
Surge Suppressor, grounding adapter, extension cord, or other surge product. Any
such installation voids the Limited Warranty and Connected Equipment Guarantee.
3. Has provided a suitable and proper environment for use and installation of the
Surge Suppressor and Connected Equipment.
4. Has properly installed and operated the Surge Suppressor and Connected
Equipment.
5. Has operated the Surge Suppressor at all times within the limitations on the
Surge Suppressor's VA capacity as stated in the User Manual.
Dynex Does Not Cover or Undertake Any Liability in Any Event for Any of the Following:
1. Loss of or damage to data, records, or software, the restoration of data or
records, or the reinstallation of software.
DX-NBKIT20-combo.fm Page 19 Friday, May 6, 2005 4:46 PM
LIMITED WARRANTY
2. Damage from causes other than Power Disturbances (as defined above) on an
AC Power Line on properly installed, grounded and code-compliant 120 volt
power lines in the United States and Canada; or a Power Disturbance on telephone
lines when properly installed and connected.
3. Damage from fire, flood, wind, rain, rising water, leakage or breakage of
plumbing, or abuse, misuse, or alteration of either the Surge Suppressor or the
Connected Equipment.
E
XCLUSION OF CONSEQUENTIAL AND OTHER DAMAGES.
The sole and exclusive remedies of the Initial Customer are those provided by the
Limited Warranty and Connected Equipment Guarantee. This exclusion of other
express warranties applies to written and oral express warranties. Dynex excludes
any liability for personal injury under the Limited Warranty and Connected Equipment Guarantee. Dynex excludes any liability for direct, indirect, special, incidental or consequential damages, whether for damage to or loss of property (EXCEPT
FOR (AND ONLY FOR) the specific limited agreement of Dynex to provide certain
warranty benefits regarding Connected Equipment under the Dynex Connected
Equipment Guarantee), loss of profits, business interruption, loss of information or
data. This exclusion applies even though damage or loss is caused by negligence
or other fault. NOTE: Some States or Provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not
apply to you.
DO NOT USE FOR HIGH RISK ACTIVITIES
19
Dynex does not sell the Surge Suppressor for use in high-risk activities. The Surge
Suppressor is not designed or intended for use in hazardous environments requiring fail-safe performance, or for use in any circumstance in which the failure of
the Surge Suppressor could lead directly to death, personal injury, or severe physical or property damage, or that would affect operation or safety of any medical or
life support device (collectively, “High Risk Activities”). Dynex expressly disclaims
any express or implied warranty of fitness for High Risk Activities. ANY SUCH USE
IS IMPROPER AND IS A MISUSE OF A DYNEX SURGE SUPPRESSOR.
The Limited Warranty and the Connected Equipment Guarantee are governed by
the laws of the United States and the State of Minnesota, without reference to
conflict of law principles.
The application of the United Nations Convention of Contracts for the International Sale of Goods is expressly excluded.
DX-NBKIT20-combo.fm Page 20 Friday, May 6, 2005 4:46 PM
20
Contact Information: Dynex (USA), Inc., 5555 12th Ave E, Suite 110, Shakopee, MN
55379, USA, (800) 305-2204 (toll free). Dynex is the warrantor under this Limited
Warranty and Connected Equipment Guarantee. You may also visit Dynex on the
Internet at www.dynexproducts.com.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B
Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: (1) Reorient or relocate
the receiving antenna. (2) Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected. (4) Consult the dealer or an experienced radio/
TV technician for help. Any special accessories needed for compliance must be
specified in the instruction.
CAUTION: A shielded-type power cord is required in order to meet FCC emission
limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded
cables to connect I/O devices to this equipment.
CAUTION: Any changes or modifications not expressly approved by the guarantee
of this device could void the user's authority to operate the equipment.
LIMITED WARRANTY
Loading...