Dynex DX-HTVMM1703-C Installation Manual
Full Motion Mount for TVs 47" - 75"
Support de montage articulé pour
téléviseurs de 47 à 75 po
DX-HTVMM1703-C
INSTALLATION GUIDE/GUIDE D’INSTALLATION
Before using your new product, please read these instructions to prevent any damage.
Avant l’utilisation de ce produit neuf, lire ces instructions afin d'éviter tout dommage.
Contents
ENGLISH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
VESA TV screw hole patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Tools needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
TV Hardware Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
STEP 2 - Select screws, washers, and spacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
STEP 3 - Option 1: Attach the mounting hardware to a TV with a flat back. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
STEP 3 - Option 2: Attach the mounting hardware to a TV with an irregular or obstructed back . . . . . . . . . . . . . . . . . . . . . . 9
STEP 4 - Determine the wall-mount location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
STEP 5 - Option 1: Install on a wood stud* wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
STEP 5 - Option 2: Install on a solid concrete or concrete block wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
STEP 6 - Secure your TV to the wall plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
STEP 7 - Manage cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
STEP 8 - Adjust the mount arm and tilt angles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ONE-YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
FRENCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
INSTRUCTIONS DE SÉCURITÉ IMPORTANTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Caractéristiques. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Modèles d'orifices VESA pour téléviseur : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Outils nécessaires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Contenu de l'emballage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Pièces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Sachet de visserie pour le téléviseur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Instructions d’installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
ÉTAPE 1 - Déterminer si le téléviseur a un dos plat ou de forme irrégulière ou est obstrué . . . . . . . . . . . . . . . . . . . . . . . . . . 22
ÉTAPE 2 - Sélectionner les vis, les rondelles et les entretoises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
ÉTAPE 3 - Option 1 : Fixation du matériel de montage pour les téléviseurs à dos plat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
ÉTAPE 3 - Option 2 : Instructions de montage pour un téléviseur à dos de forme irrégulière ou obstrué . . . . . . . . . . . . . 25
ÉTAPE 4 - Déterminer l’emplacement du montage mural. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
ÉTAPE 5 - Option 1 : Installation sur un mur à montants en bois*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
ÉTAPE 5 - Option 2 : Montage sur un mur en béton ou en blocs de béton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
ÉTAPE 6 - Fixation du téléviseur à la plaque murale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
ÉTAPE 7 – Organisation des câbles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
ÉTAPE 8 – Réglage du bras de montage et de l'angle d'inclinaison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
GARANTIE LIMITÉE D’UN AN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2
www.dynexproducts.com
DX-HTVMM1703-C
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
CAUTION: Do not use this product for any purpose not explicitly specified by Dynex.
• Improper installation may cause property damage or personal injury. If you do not understand these directions, or have
doubts about the safety of the installation, contact Customer Service or call a qualified contractor. Dynex is not
responsible for damage or injury caused by incorrect installation or use.
• The weight of your TV must not exceed 99 lbs. (45 kg). The wall must be capable of supporting five times the weight of
your TV and wall mount combined.
• This product contains small items that could be a choking hazard if swallowed. Keep these items away from young
children!
Features
• Supports TVs 47–75" and up to 99 lbs (45 kg)
• 45° swivel and -8 to 12° tilt lets you adjust the angle to suit your viewing position
• Lateral shift capability easily centers your TV
• Compatible with VESA patterns from 200 × 200 up to 600 × 400 with all common sizes in between
• Sturdy steel construction for years of dependable use
• Full assortment of mounting hardware included for a wide range of TVs
VESA TV screw hole patterns
Your wall mount works with the following VESA TV screw hole patterns:
200 × 200 mm (7.9 × 7.9") 400 × 200 mm (15.7 × 7.9") 500 × 400 mm (19.7 × 15.7")
300 × 200 mm (11.8 × 7.9") 400 × 300 mm (15.7 × 11.8") 600 × 400 mm (23.6 × 15.7")
300 × 300 mm (11.8 × 11.8") 400 × 400 mm (15.7 × 15.7")
www.dynexproducts.com
3
Dimensions
2
6
.
1
i
n
.
(
6
6
.
4
c
m
)
1
8
.
1
i
n
.
(
4
6
c
m
)
16.9 in. (43 cm)
1
8
i
n
.
(
4
5
.
7
c
m
)
Edge-to-edge
stud finder
Phillips
screwdriver
Measuring
tape
Drill
3/16 in. (5 mm) wood drill bit
(for wood stud wall)
Hammer
Tape
Pencil
Socket
wrench
5 × Allen wrench
OR
3/8 in. (10 mm) masonry drill bit (for
concrete wall)
Full Motion Mount for TVs 47" - 75" Support de montage articulé pour téléviseurs de 47 à 75 po
Tools needed
You need the following tools to assemble your new TV wall mount:
4
www.dynexproducts.com
DX-HTVMM1703-C
Wall Mount (1)
Wall Plate Template (1)
TV Brackets (2)
M4 × 12 mm screw
M8 × 50 mm screw
M4 × 30 mm screw
Spacer
M5 × 12 mm screw
M4/M5 washer
M5 × 30 mm screw
M6/M8 washer
M6 × 12 mm screw
Lag bolt
M6 × 20 mm screw
Concrete anchor
M6 × 35 mm screw
Lag bolt washer
M8 × 16 mm screw
Magnetic removable bubble
level
M8 × 25 mm screw
Cable holder
Package contents
Parts
Make sure that you have all the parts and hardware necessary to assemble your new TV wall mount:
TV Hardware Bag
LABEL HARDWARE QTY. LABEL HARDWARE QTY.
A1
A2
A3
A4
A5
A6
A7
4
4
4
4
4
4
4
A10
A11
A12
A13
B1
B2
B3
4
4
4
4
4
4
4
A8
A9
41
43
www.dynexproducts.com
5
Full Motion Mount for TVs 47" - 75" Support de montage articulé pour téléviseurs de 47 à 75 po
Installation instructions
STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and
scratches.
2 If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV for
instructions.
3 Lay the TV brackets, oriented vertically, on the back of your TV.
4 Align the screw holes in the TV brackets with the mounting screw holes on your TV.
5 Identify which type of back your TV has:
• Flat back: The brackets lay flush against the back of your TV and do not block any jacks. You do not need spacers when
assembling the wall mount.
• Obstructed back: The brackets block one or more of the jacks on the back of your TV. You need spacers when
assembling the wall mount.
• Irregularly-shaped back: There is a gap between a bracket and some part of the back of your TV. You need spacers
when assembling the wall mount.
6 Remove the TV brackets.
6
www.dynexproducts.com
DX-HTVMM1703-C
Screw is
too long
Screw fits
correctly
Screw is
too short
STEP 2 - Select screws, washers, and spacers
1 Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with mounting hardware
included. (If there are screws that came with your TV, they are almost always in the holes on the back of your TV.) If you
don't know the correct length of the mounting screws your TV requires, test various sizes by hand-threading the
screws.
Select one of the following types of screws:
For a TV with a flat back:
• M4 X 12 mm screws (A1)
• M5 X 12 mm screws (A3)
• M6 X 12 mm screws (A5)
• M8 X 16 mm screws (A8)
For a TV with an irregular/obstructed back:
• M4 X 30 mm screws (A2)
• M5 X 30 mm screws (A4)
• M6 X 20 mm screws (A6)
• M6 X 35 mm screws (A7)
• M8 X 25 mm screws (A9)
• M8 X 50 mm screws (A10)
If you use M4 or M5 screws, select the M4/M5 washer (A12) or if you use M6 or M8 screws, select the
M6/M8 washer (A13). For an irregular or obstructed TV back, also use the spacers (A11).
CAUTION: To avoid potential personal injuries and property damage, make sure that there are adequate threads to secure the
brackets to your TV. If you encounter resistance, stop immediately and contact customer service. Use the shortest screw and spacer
combination to accommodate your TV. Using hardware that is too long may damage your TV. However, using a screw that is too short
may cause your TV to fall from the mount.
2 Remove the screws from the holes in the back of your TV.
3 For a flat back TV, go to STEP 3 - Option 1: Attach the mounting hardware to a TV with a flat back
-ORFor an irregular or obstructed back, go to STEP 3 - Option 2: Attach the mounting hardware to a TV with an irregular or
obstructed back on page 9.
on page 8.
www.dynexproducts.com
7
Full Motion Mount for TVs 47" - 75" Support de montage articulé pour téléviseurs de 47 à 75 po
A1 (4)
Phillips screwdriver
Screws Washers
TV brackets (2)
OR
A3 (4)
A12 (4)
A5 (4)
Magnetic removable
bubble level
OR
A13 (4)
OR
A8 (4)
OR
A12 or
A13
A1/A3/A5
or A8
TV brackets
STEP 3 - Option 1: Attach the mounting hardware to a TV with a flat back
You’ll need
1 Align the left and right TV brackets with the screw holes on the back of your TV. Make sure that the brackets are level.
2 Install washers (A12 or A13) and screws (A1, A3, A5, or A8) into the holes in the back of your TV.
3 Tighten the screws until they are snug against your TV brackets. Do not over tighten.
8
www.dynexproducts.com
DX-HTVMM1703-C
A2 (4)
A4 (4)
Phillips screwdriver
Screws
A7 (4)
OR
A11 (4)
OR
Spacers
TV brackets (2)
A6 (4)
OR
OR
Washers
A12 (4)
A13 (4)
OR
Magnetic removable
bubble level
A10 (4)
OR
A9 (4)
OR
OR
A12 or
A13
A2/A4 or
A6/A7 or
A9/A10
TV brackets
A11
STEP 3 - Option 2: Attach the mounting hardware to a TV with an irregular or obstructed back
You’ll need
1 Place spacers (A11) over the holes on the back of your TV.
2 Align the left and right TV brackets with the screw holes on the back of your TV. Make sure that the brackets are level.
3 Place washers (A12 or A13) over the holes in the TV brackets. Insert screws (A2, A4, A6, A7, A9, or A10) through the
washers, TV brackets, and spacers and into the screw holes on the back of your TV.
4 Tighten the screws until they are snug against the TV brackets. Do not over tighten.
www.dynexproducts.com
9
Full Motion Mount for TVs 47" - 75" Support de montage articulé pour téléviseurs de 47 à 75 po
Measuring tape
Pencil
A
B
STEP 4 - Determine the wall-mount location
You’ll need
Notes:
• For more detailed information on determining where to drill your holes, visit our online height-finder at:
http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder
• Your TV should be high enough so your eyes are level with the middle of the screen. This is normally 40 to 60 in. from the ground.
The center of your TV will be offset .8 in. lower than the center of the wall plate on the wall-mount. Before you drill holes in
the wall:
1 Measure the distance from the bottom of your TV to the center point halfway between the top and bottom mounting
holes on the back of your TV. This is measurement a.
2 Measure the distance from the floor to where you want the bottom of your TV to be placed on the wall. Keep in mind
that the bottom of your TV should be placed above any furniture (such as entertainment centers or TV stands). Your TV
should also be above items placed on top of the furniture (like a Blu-ray player or cable box). This measurement is b.
3 Add a + b. The total measurement is the height where you want the center of the wall plate to be on the wall.
4 Use a pencil to mark this spot on the wall.
10
www.dynexproducts.com
DX-HTVMM1703-C
Edge-to edge
stud finder
Drill
3/16 in. wood
drill bit
Magnetic removable bubble
level
Wall plate template
Tap e
B1 (4)
B3 (4)
Wall mount
Socket wrench
Align the center of the
template with the height
mark (a+b) you made in
STEP 4.
Level
* Minimum wood stud size: common 2 × 4 in. (51 × 102 mm) nominal 11/2 × 31/2 in. (38 × 89 mm).
* Minimum horizontal spacing between fasteners cannot be less than 16 in. (406 mm).
2.4 in. (60 mm)
3/16 in. (5 mm)
STEP 5 - Option 1: Install on a wood stud* wall
You’ll need
Note: Any drywall covering the wall must not exceed 5/8 in. (16 mm).
1 Locate the stud. Verify the center of the stud with an edge-to-edge stud finder.
2 Align the center of the wall plate template at the height (a + b) you determined in the previous step, make sure that the
template is level, then tape it to the wall.
3 Drill four pilot holes through the template to a depth of 2.4 in. (60 mm) using a 3/16 in. (5 mm) diameter drill bit, then
remove the template.
www.dynexproducts.com
11
Loading...