Dynex DX-DRTVM102 User Manual
ASSEMBLY INSTRUCTIONS
DX-DRTVM102
Medium Low Profile Wall Mount with Optional -5° Tilt
For wood-stud, concrete-wall, or
concrete-bloack installation
Safety information and
specifications...........................................2
TVs the wall mount fits ........................3
Tools needed ...........................................3
Parts ............................................................4
Hardware...................................................5
Assembly instructions..........................6
2 DX-DRTVM102
Safety information and specifications
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
CAUTION: Do not use this product for any
purpose not explicitly specified by Dynex.
Improper installation may cause property
damage or personal injury. If you do not
understand these directions, or have doubts
about the safety of the installation, contact Customer
Service or call a qualified contractor. Dynex is not
responsible for damage or injury caused by incorrect
installation or use.
The weight of your TV must not exceed 50 lbs. (22.6 kg).
The wall must be capable of supporting five times the
weight of the TV and wall mount combined.
This product contains small items that could be a choking hazard if swallowed. Keep these items away from young
children!
This product is not designed for use in metal stud walls.
Model #: DX-DRTVM102
Distributed by Best Buy Purchasing, LLC
Manufacturer: Milestone/Secura
Maximum weight: 50 lbs. (22.6 kg)
Screen size: 22" to 37" diagonal
Overall dimensions (W × H): 13.9" x 9.84" (353 x 250 mm)
Wall-mount weight: 3 lbs. (1.36 kg)
We’re here for you
www.dynexproducts.com
For customer service, call:
800-305-2204 (U.S./Canada markets)
13.9" (353 mm)
9.84" (250 mm)
Need help? Call 800-305-2204
DX-DRTVM102
TVs the wall mount fits
The wall mount fits TVs with M4, M5, or M6 screw holes that are the following distances apart:
13.78" (350 mm) maximum horizontal distance
9.06" (230 mm) vertical distance
3
Tools needed
You will need the following tools to assemble your new wall mount:
Edge-to-edge stud finder Pencil Tape measure Hammer
Level
Phillips screwdriver
Socket wrench with 1/2" (13 mm)
socket or adjustable wrench
OR
Drill
7/32" (5.5 mm) wood drill
bit for wood stud wall
Need help? Call 800-305-2204
3/8" (10 mm) masonry
drill bit for concrete wall
4 DX-DRTVM102
Parts
Package contents: parts
Make sure you have all the parts necessary to assemble your new TV wall mount:
01 Wall plate (1)
02 Left TV
bracket (1)
03 Right TV
bracket (1)
Need help? Call 800-305-2204
DX-DRTVM102
Hardware
Package contents: hardware
Note: Not all hardware will be used.
Make sure you have all the hardware necessary to assemble your new wall mount:
5
Label Hardware Qty.
04 2
5/16" × 2 3/4" lag bolt
(7.9 mm × 69.9 mm)
05 2
5/16" (7.9 mm)
washer
06 2
Concrete anchor
07 4
08 4
09 4
10 4
M4 × 12 mm screw
M4 × 30 mm
screw
M5 × 12 mm screw
M5 × 30 mm
screw
Label Hardware Qty.
11 4
12 4
13 4
14 8
15 4
16 4
17 4
M6 × 12 mm screw
M6 × 20 mm screw
M6 × 35 mm
screw
M4/M5 washer
M6 washer
M4/M5 spacer
M6 spacer
1234in
10 20 30 40 50 60 70 80 90 1 00mm
Need help? Call 800-305-2204
Loading...