Dynex DX-DPF7 User Manual

7” Digital Picture Frame

Cadre photo numérique de 7 po
Marco digital para fotos de 7"

DX-DPF7

USER GUIDE • GUIDE DE L’UTILISATEUR • GUÍA DEL USUARIO

2

Contents

Dynex DX-DPF7

7” Digital Picture Frame

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety information . . . . . . . . . . . . . . . . . . . . . . . . . 2

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Setting up your digital picture frame . . . . . . . . . . . 3

Using your digital picture frame. . . . . . . . . . . . . . . 3

Maintaining your digital picture frame . . . . . . . . . . 4

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

90 Day Limited Warranty. . . . . . . . . . . . . . . . . . . . 7

Français . . . . . . . . . . . . . . . . . . . . . . . . . 9

Español . . . . . . . . . . . . . . . . . . . . . . . . 15

Introduction

Congratulations on your purchase of a high-quality Dynex product. Your
DX-DPF7 represents the state of the art in digital picture frame design,
and is designed for reliable and trouble-free performance.

Safety information

Always follow these basic safety precautions when using your digital
picture frame. This will reduce the risk of fire, electric shock, and injury.

Warning: To reduce the risk of fire or shock hazard, do not expose the

digital picture frame to rain or moisture.

Warning: To prevent the risk of electric shock, do not remove the cover.

There are no user-serviceable parts inside. Refer all servicing to
qualified personnel.

Power and Power Cord—Protect the power cord. Route power cords
so that they are not likely to be walked on or pinched by items placed on
or against them. Pay particular attention to the point where the cord
attaches to the digital picture frame.
Only use the AC adapter included with the digital picture frame. Using
any other power adapter will void your warranty.
Unplug the power cord from the outlet when the digital picture frame is
not in use.
Placement—To prevent fire or electric shock, do not expose this digital
picture frame to rain or moisture. To prevent it from falling do not place it
on an unstable cart, stand, tripod, bracket or table. Keep it away from
strong magnets, heat sources, direct sunlight, and excessive dust.
Installation—Make sure that the frame is used in accordance with the
instructions and illustrations provided in this manual.
Objects and Liquids—Do not push objects of any kind into the frame
through openings; do not spill or spray liquid of any kind on or into the
frame (this may result in a fire or electric shock). Do not place anything
heavy on the unit. To ensure proper ventilation and proper operation,
never cover or block the slots and openings with a cloth or other
material.
Disassembly—Do not attempt to disassemble the cabinet. There is a
risk of electric shock. Contact qualified service personnel if your frame is
in need of repair.
Cleaning you frame—When cleaning, make sure the frame is
unplugged from the power source. Do not use liquid cleaners or aerosol
cleaners. Use a cloth lightly dampened with water for cleaning the
exterior of the frame only.

Features

The digital picture frame includes these key features:

• A 7” LCD (Liquid Crystal Display) 16:9 aspect ratio display.

• Compatible memory cards include SD, MMC, MS, XD, and CF cards,
as well as USB memory devices.

What's In the Box

• 7” Digital Picture Frame (1)

•AC to DC Power Adapter

• User's Guide

• Remote Control with battery (CR2025)

Left and right side view

#Description

1 CF card slot
2 SD, MS/MMC, XD card slot
3USB port
4DC 9 V port

Top view

EXIT

#Item Description

1 Power LED Lights when the power is on.
2

POWER button

3 PLAY/PAUSE/MODE

button

4 EXIT button Press to enter the Main screen. On the

5

UP /COPY/DELETE
button

Press to turn on the frame. Press again
to turn off the frame.

Press to confirm a selection, pause a
slide show, or change modes (Slide
Show, Browse, Thumbnail).

Main screen, press to enter the Card
Selection screen.

Press to navigate the on-screen menus,
to copy a photo, or to delete a photo
(the options are displayed when the
button is pressed).

Setting up your digital picture frame

3

# Item Description

6

DOWN /ROTATE
button

7

PREV button

8

NEXT button

Press to navigate the on-screen menus
or to rotate a photo.

Press to navigate the on-screen menus
or to view the previous photo.

Press to navigate the on-screen menus
or to view the next photo.

Remote control

1

2

3

6/,'(6/,'(

4

5

6

7

8

9

10

2 While pressing down on the ridged area of the battery cover, pull

the tray out.

3 Remove the old battery, if necessary.
4 Place a CR2025 lithium battery on the tray with the positive + end

facing toward you.

5 Close the tray.

Setting up your digital picture
frame

To set up your digital picture frame:

1 Extend the stand from the back of your digital picture frame.
2 Rotate the stand to position the frame either vertically or

horizontally.

3 Place your digital picture frame on a flat surface.
4 Plug one end of the AC power adapter into your digital picture

frame.

5 Plug the other end of the AC power adapter into a wall outlet.
6 Insert a memory card or USB device into the appropriate slot.

Note

: The card only fits in one direction. Do not force it. The card should fit

snugly when correctly inserted.

7 Press the POWER button on the top of your digital picture

frame to turn it on.

Using your digital picture frame

Digital Picture Frame

# Button Action

1 MENU Press to enter the Setup Menu.
2

3 COPY/DE L. Press to copy a photo into frame

4 EXIT Press to return to the Main menu

5 ZOOM Press to enlarge the displayed

6

7 PLAY/PAUSE/MODE Press to confirm a selection,

8

9

10 SLIDE SHOW Press to enter Slide Show mode.

PREV

UP

NEXT

DOWN /ROTATE

Press to move the cursor to the
left or to access the previous
photo.

memory or to delete a photo
from the frame.

or to enter the card selection
screen when the Main Menu is
displayed.

photo by 100%, 117%, 133%,
150%, or 200%.

Press to move the cursor up.

pause a slide show, or change
modes (Slide Show, Browse,
Thumbnail).

Press to go to the next photo.

Press to navigate the on-screen
menus or to rotate a photo.

Setting up the remote control

Note

: Pull the plastic tab sticking out of the remote control. It protects the

battery. The remote control cannot work unless it is removed.

To install or replace the remote control battery:

1 Hold the remote control with the control buttons facing

downward.

To turn on your frame and select a photo:

1 Press POWER on the top of your digital picture frame, your

frame turns on.

2 Insert a card into one of the card slots or insert a USB memory

device into the USB slot. The photos display automatically.

3 Press EXIT. The Main Menu opens.

4 Press EXIT again to enter the Card Selectio n screen, then press the

or NEXT button to select the card you want.

PREV

5 Press PLAY/PAUSE/MODE

to enter the Slide Show mode. This

displays photos, based on the Transition Mode settings.

6 Press PLAY/PAUSE/MODE

again to enter the Browse mode.

Your frame displays a single picture.

7 Press PREV
8 Press PLAY/PAUSE/MODE

or NEXT to select a photo.

a third time to enter Thumbnail

mode. The thumbnail images appear on the screen in a table.

9 Press PREV

thumbnail, then press PLAY/PAUSE/MODE

, NEXT , UP , or DOWN to select a

to show the

picture.

To copy photos to your frame:

1 Press POWER on the top of your digital picture frame, the

frame turns on.

2 If your frame is in slide show mode, press EXIT. The Main Menu

opens. If the Main Menu is already open, go to the next step.

4

Maintaining your digital picture frame

3 Insert a card into one of the card slots, or insert a USB memory

device into the USB slot.

4 Press PLAY/PAUSE/MODE

one or more times to enter the

Slide Show mode or Browse mode.

5 Select the photo you want to copy, then press UP/COPY/DELETE.

The frame will ask you if you want to copy the photo.

6 Press PREV

or NEXT to select YES, then press

PLAY/PAUSE/MODE. The photo is copied.
The frame can copy as many as 40 photos to memory.

Note

: While in Slideshow mode you can rotate the photo in your frame by

pressing DOWN/ROTATE.

To delete photos from your frame’s memory:

1 Remove the SD/MMC/MS/XD card, CF card, or USB memory device

from the frame.

2 Press POWER

on the top of your digital picture frame, the

frame turns on.

3 Press PREV

or NEXT to select the photo you want to delete.

4 Press UP/COPY/DELETE. Your frame will ask you if you want to

delete the photo.

5 Press PREV

or NEXT to select YES, then press

PLAY/PAUSE/MODE. The photo is deleted.
Note

: The Delete function only deletes photos from the frame’s memory. It

will not delete photos from a card or USB memory device.

To select the photo source:

1 Press POWER on the top of your digital picture frame, the

frame turns on.

2 Press EXIT on the remote control to enter the source selection

screen. (With the Main Menu displayed, press EXIT once. In slide
show mode press EXIT twice.)

3 Press PREV

or NEXT to select the source you want to use,

then press PLAY/PAUSE/MODE to enter Slide Show mode and
view the photos.

Note

: You cannot select a card that has not been inserted in your frame.

Configuring your digital picture frame

To configure your digital picture frame:

1 Press POWER on the top of your digital picture frame, the

frame turns on.

2 If your frame is in slide show mode, press EXIT. The Main Menu

opens. If the Main Menu is already open, go to the next step.

3 Press PREV

or NEXT to select SETTING, then press

PLAY/PAUSE/MODE. The Setup Menu opens.

Setup Menu

%U L JK W QH V V
6O L GH6KRZ 7L PH
7UDQVLWLRQ0RGH
26 ' / D Q J X D J H
'H I D X O W
([ L W  6 HWXS 0HQX

6HO HFW

4 Press

PLAY/PAUSE/MODE to select one of the six submenus to

open, then press NEXT

5 Press UP

, or DOWN to make your selection in the

submenu, then press

to enter the submenu.

PLAY/PAUSE/MODE to confirm.

6W DQGDU G
6RI W QHV V
(QKDQFHG

&R Q I L U P

6 Press MENU to return to the previous menu.

The following table lists all the submenus and submenu options:

Submenu Settings

Brightness

Slide Show Time

Transition Mode

OSD Language

Default
Exit Setup Menu Press PLAY/PAUSE/MODE or

•Standard

•Softness

• Enhanced

•5 sec.

• 10 sec.

• 30 sec.

• 15 min.

•1 hour

•Random

• No Effect

•Cover Up

•Cover Down

•Cover Left

•Cover Right

•English

•French

•Spanish

• Reset

EXIT to exit the Setup Menu.

Maintaining your digital picture
frame

Cleaning the LCD Screen

Be very careful when you clean the LCD screen. The screen is made of
glass and can be scratched or broken.

To clean fingerprints or dust from the LCD screen, we recommend using
the cloth provided or a soft, non-abrasive cloth such as a camera lens
cloth.
If you use a commercial LCD cleaning kit, do not apply the cleaning liquid
directly to the LCD screen. Clean the LCD screen with the cleaning cloth
moistened with the liquid.

Cleaning your digital picture frame

Clean the outer surface of your digital picture frame (excluding the
screen) with a soft cloth dampened with water.

Troubleshooting

5

Troubleshooting

Problem Solution

Your digital picture
frame won't turn on.

A memory card is
inserted in your digital
picture frame but you
cannot view your
photos.

The frame displays some
pictures slower and
some pictures faster.

The adapter is not securely
connected to your picture frame or
the power switch is not on.

Higher resolution pictures load more
slowly. Try using lower resolution
pictures or down sampling your
images. See your camera's operating
manual for details on down sampling
your photos.

Specifications

Photo format JPEG
Memory card formats Secure Digital™, Multi

Panel size 7” diagonal
Power source AC to DC adapter (9 V DC )
Power consumption FCC/PSE (Adapter)
Operating temperature 41~90°F (5~35°C)
Weight 1.04 lb. (.47 kg)
Dimensions (W×H×D) 9.6 × 6.8 × 1.2 inches

• Make sure that the memory card is one of the
supported form ats and that the files on the card
are JPEG images files.

• Turn your digital picture frame off and make sure
that the mem ory card is inse rted all the way i nto
the card slot and is inserted correctly.

• Turn the frame on. After a coupl e of seconds, you
should see your first photo.

• Note: Some digital came ras save images in
formats other than JPEG. Refer to your cam era's
manual if your photos are not JPEG files.

Media Card™, Compact
Flash™, xD Memory Stick™,
and USB Flash Drives

(235 × 167 × 30 mm)

Image Use Restrictions

Use of the images pre-loaded on your digital picture frame is limited to personal,
non-commercial use. Consumer may not modify, duplicate, distribute, retransmit,
republish, reproduce, or create derivative works from the pre-loaded images.

Legal notices

FCC Part 15

This device complies with Part 15 of the FCC Rules. Operation of this product is subject to
the following two conditions: (1) this device may not cause harmful inter ference, and (2)
this device must accept any inter ference received, including inter ference that may cause
undesired operation.

FCC warning

Changes or modifications not expressly approved by the party responsible for compliance
with the FCC Rules could void the user’s authority to operate this equipment.

DHHS and FDA safety certification

This product is made and tested to meet safety standards of the FCC, requirements and
compliance with safety performance of the U.S. Depa rtment of Health and Human
Services, and also with FDA Radiation Performance Standards 21 CFR Subchapter J.

Canada ICES-003 statement

This Class B digital apparatus complies with Canadian ICES-003.

RSS 310 statement

To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more
than that permitted for successful communication.

Copyright

© 2007 Dynex. DYNEX® is a registered trademark of Best Buy Enterprise Services, Inc.
Other brands and product names are trademarks or registered trademarks of their
respective holders. Specifications and features are subject to change without notice or
obligation.
For service and support call (For customer service please call 1-800-305-2204.

6

Legal notices

Legal notices

7

90 Day Limited Warranty

Dynex Products (“Dynex”) warrants to you, the original purchaser of this new DX-DPF7
(“Product”), that the Product shall be free of defects in the original manufacture of the
material or workmanship for a period of 90 days from the date of your purchase of the
Product (“Warranty Period”). This Product must be purchased from an authorized dealer
of Dynex brand products and packaged with this warranty statement. This warranty does
not cover refurbished Product. If you notify Dynex during the Warranty Period of a defect
covered by this warranty that requires service, terms of this warranty apply.

How long does the coverage last?

The Warranty Period lasts for 90 days from the date you purchased the Product. The
purchase date is printed on the receipt you received with the product.

What does this warranty cover?

During the Warranty Period, if the original manufacture of the material or workmanship
of the Product is determined to be defective by an authorized Dynex repair center or store
personnel, Dynex will (at its sole option): (1) repair the Product with new or rebuilt parts;
or (2) replace the Product at no charge with new or rebuilt comparable products or parts.
Products and parts replaced under this warranty become the property of Dynex and are
not returned to you. If service of Products and parts are required after the Warranty
Period expires, you must pay all labor and parts charges. This warranty lasts as long as
you own your Dynex Product during the Warranty Period. Warranty coverage terminates
if you sell or otherwise transfer the Product.

How to obtain warranty service?

If you purchased the Product at a retail store location, take your original receipt and the
Product to the store you purchased it from. Make sure that you place the Product in its
original packaging or packaging that provides the same amount of protection as the
original packaging. If you purchased the Product from an online web site, mail your
original receipt and the Product to the address listed on the web site. Make sure that you
put the Product in its original packaging or packaging that provides the same amount of
protection as the original packaging.
To obtain in-home warranty service for a television with a screen 25 inches or larger, call
1-888-BESTBUY. Call agents will diagnose and correct the issue over the phone or will
have an Dynex-approved repair person dispatched to your home.

Where is the warranty valid?

This warranty is valid only to the original purchaser of the Product in the United States
and Canada.

What does the warranty not cover?

This warranty does not cover:

• Customer instruction

• Installation

•Set up adjustments

• Cosmetic damage

• Damage due to acts of God, such as lightning strikes

•Accident

•Misuse

•Abuse

•Negligence

• Commercial use

• Modificatio n of any part of the Product

• Plasma display panel damaged by static (non-moving) images applied for
lengthy periods (burn-in).

This warranty also do es not cover:

• Damage due to incorrect operation or maintenance

• Connection to an incorrect voltage supply

• Attempted repair by anyone other than a facility authorized by Dynex to service
the Product

• Products sold as is or with all faults

• Consumables, such as fuses or batteries

• Products where the factory applied serial number has been altered or removed

REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY.
DYNEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT
NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST
PROFITS. DYNEX PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO
THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION
TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS
OR IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Dynex:

For customer service please call 1-800-305-2204
www.dynexproducts.com

®

is a registered trademark of Best Buy Enterprise Services, Inc.

DYNEX
Distributed by Best Buy Purchasing, LLC.
Dynex, 7601 Penn Avenue South, Richfield, Minnesota, U.S.A.