Dynex DX-7HTV-09 User Manual
7" Portable Digital TV
DX-7HTV-09
USER GUIDE
2
Contents
Dynex 7" Portable Digital
TV DX-7HTV-09
Contents
Important safety instructions........................................................... 2
Package contents.............................................................................. 2
TV components ................................................................................ 2
OSD menu ........................................................................................ 4
WARNING: The TV will not work when it is moving...........................4
Troubleshooting ............................................................................... 5
SpecificatSpecifications.................................................................... 5
Legal notices ....................................................................................5
90-Day Limited Warranty ................................................................. 7
Important safety instructions
• To prevent from fire or electric shock, do not expose the TV to rain
or moisture.
• Do not place the TV on an unstable cart, stand, tripod, bracket, or
table to prevent it from falling.
• Keep the TV away from strong magnets, heat sources, direct
sunlight, and excessive dust.
• If you move the TV from a cold to a warm location, wait for about
one hour before operating it, or leave the TV turned on until the
moisture evaporates to prevent moisture from condensing inside
it.
• Make sure that the TV is installed in accordance with the
instructions and illustrations provided in this manual.
• Do not push objects of any kind into the TV through openings. Do
not spill or spray liquid of any kind on or in the TV (this may result
in a fire or electric shock).
• Do not place anything heavy on the TV.
• To ensure proper ventilation and proper operation, never cover or
block the slots and openings with a cloth or other material.
• Keep the TV away from an open flame such as a fire, or candle.
• Do not attempt to take apart the cabinet. There is a risk of electric
shock or exposure to laser radiation. Contact qualified service
personnel if the TV needs repair.
• When cleaning, make sure the TV is unplugged from the power
source. Do not use liquid cleaners or aerosol cleaners. Use a cloth
lightly dampened with water for cleaning the exterior of the TV
only.
TV components
Front view
Number Component Description
1 IR Sensor Recieves information from
2 POWER Press to turn the TV on and off.
3 MENU Press to open and close the TV
4
CH +/-
5 ENTER Press to confirm a menu
6 INPUT Press to switch between TV and
7 WIDE Press to select Widescreen or
remote control.
menu.
Press to highlight menu
options.
Press to select the previous or
next channel.
selection.
AV IN modes.
Auto formats.
Package contents
The following items are in this package
• 7'' portable digital TV
• Remote control with battery
• Audio/video cable
• Power adapter
• Car power adapter
•L-shaped F connector
•This user guide
TV components
3
Left side view
VOL.
Number Component Description
1 Headphone Insert headphones
into this jack for
private listening. The
external speaker is
muted.
2 Vol. Press to adjust volume
up or down.
3 Brightness Press to adjust the
brightenss up or
down.
Remote control
Right side view
Number Component Description
1 RF IN Connect an antenna to
2 AV IN Co nne ct a n AV d evice s uch
3 Power/Charge LED LED status:
4 DC 9V Connect the provided
this jack.
as a VCR or DVD player to
this jack.
Green=TV on
Red=Built-in battery is
recharging
OFF= built-in battery is
fully charged
power adapter to this jack.
Number Button Description Function
1 AUTO Press to search for
2 DISPLAY Press to display channel
3 MENU Press to access the TV
4
ENTER
5 Number keys Press to select channels.
6 GUIDE Press to display program
7 INPUT Press to switch between
8 MUTE Press once to mute. Press
9 AUDIO Press to select from
10 CH+ Press to select the next
11 CH- Press to select the
channels automatically.
information.
menu.
Press to navigate the
on-screen menu and to
confirm your selection.
information for digital
stations.
TV and AV I N.
again to restore the sound
available audio
soundtracks.
channel.
previous channel.
4
OSD menu
OSD menu
To access the OSD menu:
1 Press MENU on the remote control.
2 Press the to select a setting, then press ENTER.
3 Press MENU to exit.
Clock menu
OSD Duration Set the duration of the on-screen display:
Sleep Timer Set to turn the TV off automatically: 5, 10,
Time zone (DTV only) Select your time zone
Daylight savings time
(DTV only)
Setup menu
Language Select English, Spanish, or French
Transparent Make the menu transparent
Closed Caption (DTV
only)
Zoom Mode Select Auto, Wide, Zoom, or Cinema
Restore Setting Reset settings to factory default
Channel setup menu (TV only)
Antenna Select a reception method: Air or CATV (cable)
Auto Scan Perform a channel scan to save to memory. Erases
Auto Scan
Add CH
Channel
Skip
Channel NO Changes the channel, while in Menu mode.
Channel
Label
previously saved channel information.
Perform a channel scan to save to memory without
erasing previously saved channel information.
Set the TV to skip specific channels found during
auto scan.
Lets you edit the program label that appears when
a channel is selected. DTV automatically adds this
information. You can manually edit it for ATV.
5, 10, 15, or 20 seconds
15, 30, 45, 60, 90, 120, 180, 240 minutes, or
OFF
Turn Daylight Savings On or Off
Select a closed caption option
Charging the battery
The TV has a built-in rechargeable battery (Lithium-Polymer). The TV
can operate up to 100 minutes with the built-in battery. Charge the
battery prior to first use. Recharge the battery when the built-in batter y
fails to power the TV and when the sound level lowers or the picture
becomes unstable.
NOTE: The battery will not charge when using the car power adapter.
To charge the battery:
1 Connect one end of the AC to the DC Input jack on the right side of
the TV.
2 Connect the other end to a power outlet.
3 Press POWER on the TV to turn the TV off. The charge indicator
turns red.
4 Disconnect the AC when the charge indicator turns off.
Scanning for channels
Scan for available analog and digital channels to create the channel list
using the CH+ and CH- buttons.
To scan for channels:
1 Press POWER on the TV to turn on your TV.
2 Press INPUT to set the input mode to TV.
3 Press MENU. The MENU screen opens.
4 Press twice to access the Channel Setup menu.
5 Press to select AutoScan. The TV beings to scan for
available channels. Pause the scan by pressing and holding
MENU.
6 Press MENU to exit the menu when the scan is complete.
Selecting analog or digital channels
You can select specific analog or digital TV stations using your remote
control.
To select an analog station:
• Enter the channel number followed by -0 (for example 11-0 for
analog channel 11). If available, the analog channel is displayed.
To select a digital station:
• Enter the channel number followed by -1 (for example 11-1 for
digital channel 11). If available, the digital channel is displayed.
NOTE: Some digital stations provide multiple broadcasts on a single
channel. To access these channels directly enter higher numbers after
the channel number (for example 11-2 or 11-3. for digital channel
11). If available, the digital channels appear.
Connecting an A/V device
WARNI NG: The TV will not work when it is moving.
Setting up the TV
Connecting power
To connect power:
1 Plug into one end of the power adapter into the DC Input jack on
the right side of the TV.
2 Connect the other end into a power outlet.
3 Troubleshooting
You can connect your TV to an A/V device such as a VCR or DVD player to
enjoy high quality stereo sound and picture.
To connect an A/V device:
1 Connect the black end of the supplied audio/video cable to the
AV In jack on the right side of the TV.
2 Connect the other end of the cable to the AV OUTPUT jacks on
the A/V device, making sure to match the color coding.
3 Press INPUT and choose AV IN.
Loading...