Engineering Data Sheet |
L3600FD DSP power amplifier 2x1800W
▪ Live performance DSP amplifier
▪ Fully integrated professional speaker processing
with FIR Drive technology
Technical specifications
Load Impedance 2 Ω 2.7 Ω 4 Ω 8 Ω
Maximum Output
Power, Single
Channel
Maximum Output
Power, Dual
Channel
Maximum Output
Power, Bridged
Maximum RMS
Voltage Swing
THD = 1%, 1 kHz
Voltage Gain
Ref.1 kHz
THD at 1200 W/4 Ω
MBW = 80 kHz, 1
kHz
3200 W 2700 W 1800 W 950 W
3000 W 2500 W 1700 W 900 W
- - 6000 W 3400 W
90.6 V
32.0 dB
< 0.05%
▪ Market leading acoustic performance and rock solid
reliability
▪ True 2 ohm stability
▪ Intuitive system control software, makes setup and
control easy
Maximum Input
+21 dBu
Level
Crosstalk
< -80 dB
ref. 1 kHz, at 100
W/4 Ω
Frequency
10 Hz to 21 kHz (±1 dB)
Response,
ref. 1 kHz
Input Impedance,
20 k Ω
Active Balanced
Signal to Noise Ratio
>109 dB
Amplifier,
A-weighted, ref to
Max. Output Power
@ 8 Ω
Output Noise,
< -68 dBu
A-weighted
Output Stage
Class H
Topology
IMD-SMPTE,
60 Hz, 7 kHz
DIM30,
3.15 kHz, 15 kHz
< 0.1%
< 0.05%
Power
Requirements
240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz
(factory configured)
| L3600FD DSP power amplifier 2x1800W
2
Power Consumption
1/8 Maximum
Output Power @ 4 Ω
Mains Fuse 240 V/230 V: T15AH; 120 V/100 V: T30AH
Protection Audio limiters, high temperature, DC, HF,
Back-EMF, Peak current limiters, Inrush current
Cooling Front-to-rear, 3-stage-fans
Ambient
Temperature Limits
Safety Class I
Color Black
Dimensions
(W x H x D), mm
Weight 18.2 kg (40.1 lb)
Signal Processing FIR Filters, Audio Limiters
Accessories RMK15 (rear rack mount kit), Multi Amplifier
+5°C to +40°C (40°F to +105°F)
Output delay per channel,
31 band GEQ per channel,
Remote Control (MARC) software
850 W
limiters, Turn on delay
483 x 88 x 462.4
PEQ per channel,
Load impedance
Test signal for max. output power according IHF-A-202
(Dynamic-Headroom, burst 1 kHz/20 ms on/480 ms
off/low level -20 dBu).
462.4 mm [18.20”]
483 mm [19.02”]
88 mm
[3.47”]
438 mm [17.24”]
418.2 mm
[16.47”]
462.4 mm
[18.20”]
438 mm [17.24”]
462.4 mm [18.20”]
| L3600FD DSP power amplifier 2x1800W
3
Dimensions
| L3600FD DSP power amplifier 2x1800W
4
Block diagram
5 | L3600FD DSP power amplifier 2x1800W
Germany:
Bosch Sicherheitssysteme GmbH
Robert-Bosch-Ring 5
85630 Grasbrunn
Germany
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, NY 14450
USA
www.dynacord.com
© Bosch Sicherheitssysteme GmbH, 2017 | Data subject to change without notice
Document Number | Vs2 | 25. Oct 2017
Ordering information
L3600FD-AU DSP power amplifier 2x1800W AU
DSP power amplifier 2 x 1800W @ 4 ohms with FIR
Drive, black, Australian region
Order number L3600FD-AU
L3600FD-CN DSP power amplifier 2x1800W CN
DSP power amplifier 2 x 1800W @ 4 ohms with FIR
Drive, black, Chinese region
Order number L3600FD-CN
L3600FD-EU DSP power amplifier 2x1800W EU
DSP power amplifier 2 x 1800W @ 4 ohms with FIR
Drive, black, European region
Order number L3600FD-EU
L3600FD-JP DSP power amplifier 2x1800W JP
DSP power amplifier 2 x 1800W @ 4 ohms with FIR
Drive, black, Japanese region
Order number L3600FD-JP
L3600FD-UK DSP power amplifier 2x1800W UK
DSP power amplifier 2 x 1800W @ 4 ohms with FIR
Drive, black, UK region
Order number L3600FD-UK
L3600FD-US DSP power amplifier 2x1800W US
DSP power amplifier 2 x 1800W @ 4 ohms with FIR
Drive, black, North American region
Order number L3600FD-US
DC-RMK15
Rack Mount Kit for amplifiers, Length 15,5“; 1L/1R
Order number DC-RMK15
Loading...