Duracraft DT-7 User Manual

OWNER’S MANUAL

TURBOTMFAN

Models DT-7 Series

DT-7

SAFETY INSTRUCTIONS

READ AND SAVE THESE IMPORTANT
SAFETY INSTRUCTIONS BEFORE
USING THIS FAN.

WHEN USING ELECTRICAL APPLI­ANCES, BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED
INCLUDING THE FOLLOWING:

1. Use this fan only as described in

this manual. Other use not recom­mended may cause fire, electric shock
or injury.

2. This product is intended for house­hold use ONLY and not for commer­cial, industrial or outside use.

3. To protect against electrical shock,
do not place fan in window, immerse
unit, plug or cord in water or spray
with liquids.

4. This fan is equipped with a polar­ized alternating current line plug (a
plug having one blade wider than the
other). This plug will fit into the power
outlet only one way. This is a safety
feature. NEVER connect the fan to any
power source other than a 120 volt
alternating current polarized outlet. If
you are unable to insert the plug fully
into the outlet, try reversing the plug.
If the plug should still fail to fit, contact
an electrician to replace the obsolete
outlet. Do not defeat the safety pur­pose of the polarized plug.

5. Close supervision is necessary
when any appliance is used by or
near children.

6. Unplug the fan from the outlet when
not in use, when moving fan from one
location to another and before cleaning.

7. Do not operate the fan in the presence
of explosive and/or flammable fumes.

8. Do not place the fan or any parts
near an open flame, cooking or other
heating appliance.

9. Do not operate the fan with a dam­aged cord, plug, after a malfunction
or if dropped or damaged in any
manner. (See warranty.)

10. Avoid contact with moving fan parts.

11. To disconnect, grip the plug and

pull it from the wall outlet. Never yank
the cord.

12. The use of attachments not recom­mended by the manufacturer may be
hazardous.

13. Always use on a dry level surface.

14. Do not hang or mount fan on a

wall or ceiling.

15. Do not operate if the fan housing
is removed or damaged.

16. A loose fit between the AC outlet
and plug may cause over heating of
the plug. Have a qualified electrician
replace the outlet.

WARNING: To reduce the risk of fire
or electrical shock, DO NOT USE THIS
FAN with any SOLID STATE Speed
Control Device.

OPERATION

• Place your fan on a
level and dry surface.

• Plug the power cord
into a polarized 120
volt AC wall outlet.

• To operate fan, turn
the Control Knob to the
desired speed setting.

• The fan base also
doubles as a convenient
carrying handle.

CLEANING AND STORAGE

• Unplug the fan before
cleaning.

• Use only a soft cloth
or cotton swab to gently
wipe the fan clean.

• DO NOT immerse the
fan in water and never
allow water to drip into
the Motor Housing.

• DO NOT use gaso­line, paint thinner or
other chemicals to clean
the fan.

• For storage, clean the
fan carefully as instruct­ed and store your fan in
a cool, dry place.

CONSUMER RELATIONS

To speak with a technical representative, or place an order, please call our
Consumer Relations Center, toll-free, at : 1-800-554-4558. Our technical
representatives are available to assist you weekdays from 8:00 am to 10 pm
and weekends from 8:30 am to 5:00 pm EST.