● High-quality music playback: play very high-quality (up to 192 Khz / 24-bit) music files in various formats (FLAC,
Monkey’s Audio APE, WAV/PCM, DTS, etc).
● Playlists: build playlists from your folders, use your own playlists, use repeat and shuffle functions.
● NAS function: access files on storage devices (HDD, optical drive, etc) attached to the player from the local
network (using SMB or FTP).
● Customizable user interface: work with media collections using cover art and icon browsing (with Full HD graphics).
● Internet radio: playback and record various Internet radio stations (HTTP/MP3 and other formats).
5
6
Dune HD TV-303D Quick Start Guide
Package Contents
15
6
1. Dune HD TV-301 media player
2. Remote control (batteries may
not be included)
3. Wi-Fi antenna (optional)
NOTE: Additional items (optional) may be included into the package, depending on player configuration, region, and
distributor.
2
4. IR extender
5. AV cable (3.5mm minijack to 3xRCA)
6. USB 3.0 (Host-Slave) cable
7. External power supply
34
10987
8. HDMI cable
9. Ethernet cable
10. Quick start guide
English
Exterior
Front viewSide view (right)
7
21
Rear view
2
1. USB 3.0 Slave
2. USB 2.0 host
3. Optical digital audio output
4. Wi-Fi antenna (optional)
5. 3.5 mm minijack AV out
6. HDMI 1.4
546 7 8 9 10 111
3
1. LED indicator
2. IR eye
7. IR extender connector
8. Y/Pb/Pr (Component video) out
9. LAN 10/100/1000
10. Power switch
11. DC power 12V
Side view (left)
1
21
1. USB 2.0 host
2. SD card slot
1. HDD rack
8
Dune HD TV-303D Quick Start Guide
Remote Control
1. Command indicator — ashes in response to RC button pressing.
2. TV — switch to TV mode. MUTE — turn the sound on/off. MODE — switch the video output mode; control some other player functions. POWER — toggle the standby mode.
3. A (Red), B (Green), C (Yellow), D (Blue) — control some player functions.
4. 0–9 — enter numbers and text; control some other player functions.
5. SEARCH — jump to a specied playback position. ZOOM — change the zoom factor for
the video content being played. SETUP — enter/leave the setup menu; adjust playback
settings during playback.
6. V+/V- (volume up / volume down) — adjust the volume.
7. P+/P- (page up / page down) — scroll up and down in various lists; control some other
player functions.
8. Arrows
INFO — main buttons for controlling the player (navigate across the items on the screen,
open/use the currently selected item, go back to the previous screen, go to main menu,
show popup menu with actions, show information, control some other player functions).
9.
, ENTER, RETURN, TOP MENU, POP UP MENU,
— control the playback.
English
10.
SUBTITLE, ANGLE/ROTATE, AUDIO, REC, DUNE, URL — control the playback and some other player functions.
11.
REC — start/stop TV channel recording, — launch Dune HD Portal, URL — open Web Browser with concrete URL
NOTES:
● Use alkaline AAA batteries.
● Observe polarity when inserting batteries.
● Direct the remote control to the player. There must be no obstacles between the RC and the player.
● If RC functions only at short distances or stops functioning, make sure to replace the batteries.
● Some RC buttons may have several functions depending on the current player mode.
● Some RC buttons may be available only in certain player modes or only during playback of a certain content.
9
10
Dune HD TV-303D Quick Start Guide
Getting Started
Ensure there is enough space around the player for proper cooling. The space at each side should be not less than
10 cm.
Ensure the RC has batteries installed.
Connect the player to your TV and to other A/V equipment in an appropriate way. Use HDMI connection to get the
best possible quality of video and audio. Make sure to switch off the player and all relevant A/V equipment before
connecting them. Ensure your TV and other A/V equipment are configured to use proper inputs.
Switch on the player. The player will perform its initial loading procedure, which may take up to about 1 minute. During
the loading procedure, "DUNE HD" logo is shown on the TV.
● If you do not see "DUNE HD" logo on the TV when you switch on the player, it may mean some problem with the
connection between the player and the TV or that a wrong video input is chosen in the TV or A/V receiver/switch.
In such a case, recheck the cables and the settings of the TV or A/V receiver/switch, or try to use different cables
or a different way of connecting the player to the TV.
● If you see "DUNE HD" logo on the TV when you switch on the player, but then the picture disappears and no other
picture appears during at least 10 seconds, it may mean that a wrong video output mode is configured in the player.
In such a case, press the "REC" RC button, and then press one of the RC buttons "1", "2", "3", "4" or "5" to switch
to a different video output mode (see "Quick Setting of Video Output Mode").
Finally, you should see the main screen of the player menu. The main screen shows items allowing to use different
player functions and access all storage devices and network drives connected to the player.
Adjust the player settings as needed using "SETUP" item on the main screen of the player menu. In particular, you may
want to adjust video settings, audio settings, and network settings.
To choose the language of the player menu, use “Setup / General / Interface language” setting.
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.