Duke 2502757 Owner’s Manual
Adjustable Hinged Valance
Installation and
Operation Manual
CAUTION:
This manual is Copyright © 2018 Duke Manufacturing Co. All rights reserved.
Reproduction without written permission is prohibited. Duke is a registered
Please read this manual completely before attempting
to install, operate or service this equipment
trademark of the Duke Manufacturing Co.
P/N 529053
REV D 11/07/2018
Installation and Operation of: Fold-up Shroud/Valance
WARNING
CAUTION
CAUTION
TABLE OF CONTENTS
Important Safety Instructions ............................................................................................................................ 2
Tools Required ......................................................................................................................................................... 2
Parts In Kit ................................................................................................................................................................. 3
Inspection ................................................................................................................................................................. 3
Determine Proper Length ................................................................................................................................... 4
Pre Assemble - Top Panel ..................................................................................................................................... 4
Pre Assemble - Bottom Panel ............................................................................................................................. 5
Installation ................................................................................................................................................................ 6
Valance Adjustment .............................................................................................................................................. 8
IMPORTANT SAFETY INSTRUCTIONS
Throughout this manual, you will nd the following safety words and symbols that signify important safety issues
with regards to operating or maintaining the equipment.
Indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
Indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury.
Indicates electrical shock hazard which, if not avoided, could result in death or
Indicates hot surface which, if not avoided, could result in minor or moderate
Indicates Important Information
serious injury and/or equipment damage.
injury.
TOOLS REQUIRED FOR INSTALLATION
Level
Tape Measure
#2 Phillips Screw Driver
Cordless Drill
2
Pencil
5/16 Nut Driver
3/8” Nut Driver
Installation and Operation of: Fold-up Shroud/Valance
WARNING
PARTS IN KIT
Left Side Assembly
Top Left Panel
Bottom Left Panel
Panel Assembly Hardware`
Anchor Hardware
Top Center Panel
Bottom Center Panel
INSPECTION
Drill Bit for Anchors
Right Side Assembly
Top Right Panel
Bottom Right Panel
Top Panel Hardware
Step 1
Verify packaging is not damaged. If product is damaged
stop and le claim with trucking company.
Step 2
Unpack parts and assemblies carefully. Protect the
painted/brown panels from sharp edges and rubbing
against other items during assembly.
DO NOT PULL HINGE ARMS OUT FROM HINGE BODY
UNTIL INSTRUCTED TO DO SO.
DO NOT STAND, KNEEL OR SUPPORT WEIGHT ON PANELS DURING ASSEMBLY.
Step 3
Verify fasteners in included hardware bag #215518 are
appropriate for the wall structure the valance is being
attached to.
NOTE: If wall mounting hardware is incorrect, source the
correct hardware before continuing.
215518
3
Loading...