Draper 221063 Instructions

Instructions for the

Safe Removal of Viewing Surfaces from Folding Screens by Draper

① With one hand, grasp frame and black border of projection surface near a
corner. Try not to grab the white portion of the viewing surface. With the
other hand, grasp the very edge of the black border, right over the corner
point (see Fig. 1).

Figure 1

③ While still grasping the screen frame with one hand, move to the next snap
location and pull up on the viewing surface until that snap is also released
(see Fig. 3).

② Carefully pull up on the viewing surface until the corner of the screen
unsnaps from the frame (see Fig. 2).

④ Repeat, moving around the screen releasing one snap at a time.

from several snaps at once. This can lead to screen surface or snap
damage (see Fig. 4).

Figure 2

Caution: DO NOT “Grip and Rip,” or grab the surface and pull it away

Figure 3

®

Copyright © 2011 Draper Inc. Form FoldingSurfaceRemoval_Inst11 Printed in U.S.A.

Figure 4

Always fold with snaps face-to-face. Do not permit screen fabric to con­tact border material or snaps when folded. Store in pouch provided.

If you encounter any diffi culties installing or servicing your screen, call your
dealer or Draper, Inc., Spiceland, Ind., [phone], or fax [phone].