Doremi DCP-2000 User Manual

Dolby 3D Calibration Procedure

For Doremi Digital Cinema Servers

Version 1.4

The information contained herein is confidential and may not be
divulged to any person or entity or reproduced, disseminated or
disclosed, in whole or in part. By receipt of this material including any
exhibits, attachments and spreadsheets the recipient agrees that the
information contained herein shall be kept confidential and shall not,
without the prior written consent of Doremi Laboratories, be disclosed
by the recipient in any manner.

D2K.DP.000462.DRM Page 1 Version 1.4

Doremi Cinema LLC Confidential

Table of Contents

1 INTRODUCTION........................................................................................................................... 3

1.1 PURPOSE................................................................................................................................... 3

1.2 CONTACT INFORMATION................................................................................................................. 3

2 PRELIMINARY PHASE................................................................................................................. 4

2.1 SERVER REQUIREMENTS................................................................................................................ 4

2.2 REQUIRED TOOLS........................................................................................................................ 4

3 DOLBY 3D CONFIGURATION.....................................................................................................5

4 CALIBRATION..............................................................................................................................7

4.1 WIZARD - FIRST STEP ................................................................................................................. 7

4.2 WIZARD - SECOND STEP .............................................................................................................. 8

4.3 WIZARD - THIRD STEP.................................................................................................................. 9

5 DEFINITIONS.............................................................................................................................. 10

6 DOCUMENT REVISION HISTORY.............................................................................................11

D2K.DP.000462.DRM Page 2 Version 1.4

Doremi Cinema LLC Confidential

1 Introduction

1.1 Purpose

When installing a Dolby 3D system, the installer needs to perform a calibration procedure. This
calibration procedure involves the server, as the adjustment will be done by the server.

This document provides the information on how to configure the Dolby 3D equipment on the server
and on how to perform the calibration adjustment.

1.2 Contact Information

USA

24/7 Technical Support line: + 1-866-484-4004
Technical Support Email: [e-mail]

Europe

24/7 Technical Support line: + 33 (0) 492-952-847
Technical Support Link: http://support.doremitechno.org/ticketing

Japan

Technical Support line: + 044-966-4855
Technical Support Email: [e-mail]

Australia ~ China ~ India ~ Indonesia ~ Korea ~ Malaysia ~ New Zealand ~ Philippines ~
Singapore ~ Taiwan ~ Thailand

Technical Support Email: [e-mail]

D2K.DP.000462.DRM Page 3 Version 1.4

Doremi Cinema LLC Confidential

2 Preliminary Phase

2.1 Server Requirements

Only a server with proper firmware and software versions can support the Dolby 3D system. To
support this Dolby 3D system, the server shall be fitted with the following:

DCP-2000/DCP-2K4/ShowVault:

• Software version 0.5.2-22 or higher

• Firmware version 21.1v or higher

IMB:

• SM version 5.0.6 or higher

• Firmware version 30.3g or higher

Note: A unit with the first revision of the media block using firmware 2.xx or 12.xx do not support

Dolby 3D system.

2.2 Required Tools

The following tools are required:

1. Dolby calibration update package for DCP2000 server (dcp2000_dfc100wizard-1.2.pkg)

2. Calibration Digital Cinema Packages

3. File for the Unity matrix (unity.txt)

4. Spectroradiometer/Colorimeter (Photo Research Model PR655 Recommended)

The first three items are provided by Doremi via email at [e-mail]. For new
units, these three items are pre-installed. The unity.txt file can be found in the /opt directory. For
units to upgrade in the field, these three items should be put on a USB stick.

Note: The colorimeter is not provided by Doremi.

D2K.DP.000462.DRM Page 4 Version 1.4

Doremi Cinema LLC Confidential