Dometic 9093100-XPR, 9093200-XPR User Manual
Seller
Dometic AB
T orggatan 8
SE-171 54 Solna
(Stockholm)
Phone +46 8 501 025 00
Fax +46 8 501 025 99
Email info@dometic.se
CENTRAL RV VACUUM
RECORD THIS INFORMATION FOR FUTURE REFERENCE
BEFORE INSTALLING THE UNIT:
Model Number
Serial Number
Date Purchased
Place of Purchase
CENTRAL RV V ACUUM
9093100-(X)PR FLUSH MOUNT
9093200-(X)PR EXTERNAL MOUNT
Replace (X) with color code from model chart on page 2
WARNING
!
This manual must be read and
understood before installation,
adjustment, service, or maintenance is performed. This unit must
be installed by a qualified service
technician. Modification of this
product can be extremely hazardous and could result in personal
injury or property damage.
INST ALLA TION & OPERA TING
INSTRUCTIONS
Form No. 3308407.000 4/03
©2003 Dometic AB
Torggatan 8 SE-171 54 Solna
Important: Instructions
must stay with unit.
Owner read carefully.
1
MODEL
9093100-(X)PR
9093200-(X)PR
SAFETY INSTRUCTIONS
This manual has safety information and instructions to help users eliminate or reduce the risk of
accidents and injuries.
RECOGNIZE SAFETY INFORMATION
!
CENTRAL RV VACUUM
This is the safety-alert symbol. When you see this
symbol in this manual, be alert to the potential for
personal injury .
Follow recommended precautions and safe operating instructions.
UNDERSTAND SIGNAL WORDS
A signal word , WARNING OR CAUTION is used
with the safety-alert symbol. They give the level of
risk for potential injury .
WARNING
!
ous situation which, if not avoided, could result in
death or serious injury .
CAUTION
!
ous situation which, if not avoided may result in
minor or moderate injury .
indicates a potentially hazard-
indicates a potentially hazard-
CAUTION
symbol indicates, a potentially hazardous situation which, if not avoided may result in property
damage.
Read and follow all safety information and instructions.
used without the safety alert
2
CENTRAL RV VACUUM
SPECIFICA TIONS:
Electrical Rating 240VAC 50/60 Hz, 1 Ph
Amp Draw 11 Amps
Minimum Wire Size 16 AWG
AC Circuit Protection 7.5 Amp
Installed Weight 12 Lbs.
Hose Length 8’ - 30’
Case Steel
Part List:
9093(X)00-(X)PR Vacuum
(4) Wood Screws*
(4) Painted Screws**
(1) Template**
powder coat
(1) Mounting Bracket*
(3) 3308150.006 Bags
(1) 3308172.000 Motor Filter
(1) 3303170.004 Exhaust Filter
(3) Wire Nuts**
* Designates supplied with external mount vacuum.
** Designates supplied with flush mount vacuum.
MODEL NUMBER CODE CHART
9093(X)00-(X)PR
1 = Flush Mount
2 = External Mount
W/Mtg Brkt
C = CREAM
E = EBONY
W = WHITE
P = POWDER COA T
R = RECREATION VEHICLE
T ools Required:
Screw Driver
Level
1/16” Drill Bit
Awl
Power Drill
Electrical Wire
Drywall Anchors
INSTALLATION
I. GENERAL INFORMA TION
A. This Central RV V acuum Cleaner is designed to be built
into a recreational vehicle at the time of manufacture;
or, with the use of an external mounting plate, it can be
installed in a recreational vehicle after it has been manufactured.
Read Installation and Operating Instructions carefully
before attempting to start your vacuum cleaner installation.
WARNING
!
Improper installation may damage equipment, could endanger life, cause serious injury and/or property damage.
B. LOCA TION:
1. External Mount Installation
a. To reach with vacuum hose as far as possible,
choose a wall or surface that is centrally located
and has an electrical outlet within 6 foot of
vacuum cleaner.
Attach mounting bracket to wall or surface at a
comfortable operating height or if not possible a
minimum of 6” above the floor. For hard surface
mounting, use the 4 outer holes with wood screws.
For drywall mounting, use 4 outer holes with drywall anchors (not supplied). See FIG . 1.
INST ALL MOUNTING
BRACKET WITH
SCREW HOLES
ABOVE KEYSTUDS
KEYSTUD
FIG. 1
6” MIN
CLEARANCE
c. Attach vacuum cleaner to the mounting bracket,
using the 4 keyholes in the back of the unit to the
4 studs on the mounting bracket, then slide unit
down into locked position.
d. Before plugging in the electrical cord, check to
be sure vacuum cleaner bag, motor filter, exhaust filter, and gate are in place. See Oper-
ating Instructions, Step s D, E, and F.
Note: Never use vacuum cleaner without dust bag
or motor filter in place.
3
Loading...