Version 1.0 | 10/18/2013
User Manual
HSPA+ Le Petit Router
DWR-710
Preface
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes.
Manual Revisions
Revision |
Date |
Description |
1.0 |
January 15, 2014 |
• Initial release |
|
|
|
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Copyright © 2014 by D-Link Corporation, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc.
D-Link DWR-710 User Manual |
i |
Table of Contents
Table of Contents
Preface.................................................................................. |
i |
Manual Revisions........................................................................... |
i |
Trademarks....................................................................................... |
i |
Product Overview............................................................... |
1 |
Package Contents......................................................................... |
1 |
System Requirements.................................................................. |
1 |
Introduction.................................................................................... |
2 |
Hardware Overview...................................................................... |
3 |
Left Side.................................................................................... |
3 |
Installation.......................................................................... |
4 |
Connecting to Your Network.................................................... |
4 |
Inserting a microSD Card........................................................... |
4 |
Driver Installation.......................................................................... |
5 |
Wireless Installation Considerations...................................... |
6 |
Configuration...................................................................... |
7 |
Initial Connection to the Router.............................................. |
7 |
Connect via USB..................................................................... |
7 |
Connect via Wi-Fi................................................................... |
8 |
Web-based Configuration........................................................ |
10 |
Configuration Utility........................................................... |
10 |
Home............................................................................................... |
11 |
Navigation.............................................................................. |
11 |
Device Status........................................................................ |
12 |
Home....................................................................................... |
13 |
Wizard.............................................................................................. |
14 |
Internet........................................................................................... |
16 |
Connection............................................................................ |
16 |
2G/3G Modem...................................................................... |
18 |
SIM............................................................................................ |
19 |
PLMN........................................................................................ |
20 |
Network.......................................................................................... |
21 |
Wi-Fi.......................................................................................... |
22 |
DHCP........................................................................................ |
23 |
NAT........................................................................................... |
24 |
SMS................................................................................................... |
26 |
New Message........................................................................ |
26 |
Local......................................................................................... |
26 |
Wi-Fi................................................................................................. |
27 |
Basic......................................................................................... |
27 |
Wireless Security.................................................................. |
29 |
Wired Equivalent Privacy (WEP)................................ |
29 |
Wi-Fi Protected Access (WPA).................................... |
30 |
WLAN Authentication and Privacy Infrastructure |
|
(WAPI)................................................................................. |
31 |
Wi-Fi Protected Setup (WPS)...................................... |
32 |
MAC Filter............................................................................... |
33 |
Station Lists........................................................................... |
34 |
Security........................................................................................... |
35 |
Firewall.................................................................................... |
35 |
IP Filter................................................................................ |
35 |
D-Link DWR-710 User Manual |
ii |
Table of Contents
IPv6 Filter........................................................................... |
36 |
MAC Filter.......................................................................... |
37 |
DDOS.................................................................................. |
38 |
URL Filter............................................................................ |
39 |
Application.................................................................................... |
40 |
About....................................................................................... |
40 |
Configuration........................................................................ |
41 |
Firmware Upgrade.............................................................. |
42 |
Standby Mode...................................................................... |
43 |
Password................................................................................ |
44 |
Date and Time...................................................................... |
45 |
Language............................................................................... |
47 |
System Log............................................................................ |
48 |
Connecting to a Wireless Network.................................. |
49 |
Using Windows 8 ........................................................................ |
49 |
Connecting to a Wireless Network.................................. |
51 |
Using Windows 7 ........................................................................ |
51 |
Configuring Wireless Security......................................... |
53 |
Using Windows Vista™............................................................... |
56 |
Configuring Wireless Security......................................... |
57 |
Using Windows® XP..................................................................... |
59 |
Configure WEP...................................................................... |
60 |
Configure WPA-PSK............................................................ |
62 |
Troubleshooting............................................................... |
64 |
Networking Basics............................................................ |
66 |
Check your IP address................................................................ |
66 |
Statically Assign an IP address................................................ |
67 |
Technical Specifications................................................... |
68 |
Warnings and Declarations ............................................. |
69 |
D-Link DWR-710 User Manual |
iii |
Section 1 - Product Overview
Product Overview
Package Contents
D-Link DWR-710 HSPA+ Mobile Router
Battery
USB Cable
If any of the above items are missing from your package, please contact your reseller.
System Requirements
•A compatible (U)SIM card with mobile data service1
•A computer a with Windows®, Macintosh® , or Linux-based operating systems
•Internet Explorer 8, Firefox 12.0, Chrome 20.0 , or Safari 4.0
1 Subject to services and service terms available from your carrier.
D-Link DWR-710 User Manual |
1 |
Section 1 - Product Overview
Introduction
The D-Link DWR-710 Le Petit HSPA+ Router lets you share a fast mobile Internet connection with multiple PCs and mobile devices wherever you go. It offers 3G HSPA+ compatibility for fast downlink and uplink data rates, so you get the high-speed upload and download speeds even when you’re on the go. Set up a personal mobile network anywhere, anytime allowing you and those around you to access the Internet, and share files.
High-Speed Mobile Internet with 3G Connectivity
The DWR-710 Le Petit HSPA+ Router gives you high-speed access to the Internet wherever you are and lets you share it on the go. Using HSPA+ technology, you can achieve download speeds of up to 21.6 Mbps and upload speeds of up to 5.76 Mbps1. The built-in 3G antenna provides a reliable connection to your 3G service provider, and a separate Wi-Fi antenna gives extended coverage to the computers and mobile devices connected to
the DWR-710.
Mobile Internet for All ofYour Devices
The Le Petit HSPA+ Router lets you share your fast mobile connection over Wi-Fi from a device small enough to fit in your pocket. With the DWR-710, you can get online with your notebook, smartphone, tablet, or any other wireless device using a single 3G mobile connection. The DWR-710 provides high-speed Wireless N coverage to give high-speed wireless access to everybody – whether you are with colleagues on a business trip, or travelling
with friends and family.
Built-in Software for Instant Access Anywhere
The DWR-710 is truly plug and play, with drivers built right into the router so you can connect without the need to install anything. Open a browser, connect the router, and you can set up your network right from a web interface. This means that notebooks and netbooks without a CD ROM drive can connect and get up and running in no time. Once the device is set up, you can simply power it on to start up your portable mobile network, meaning
that you can share your mobile Internet connection without even needing a computer.
Designed forTrue Portability
The DWR-710 Le Petit HSPA+ Router is small and slim enough to carry around in your purse, bag, or pocket. It features a microSD card slot for optional removable storage (up to 32 GB), allowing you to always have your files and contacts on hand.
1 All references to speed are for comparison purposes only. Actual speeds will vary depending on a range of factors including mobile network coverage, signal strength, network activity, and environmental conditions.
D-Link DWR-710 User Manual |
2 |
Section 1 - Product Overview
Hardware Overview
Left Side
USB Connector
microSD Card Slot (under removable housing)
microSD Card Slot |
Insert a microSD Card (up to 32GB) to access and share files and media wherever you go. |
|
micro USB Connector |
Use the included cable to connect to a powered USB port to charge the device, or to |
|
access the configuration utility. |
||
|
D-Link DWR-710 User Manual |
3 |
Section 2 - Installation
Installation
This section will guide you through the installation process.
Connecting to Your Network
Remove the back cover. Slide your (U)SIM card into the slot provided, ensuring that the alignment is the same as indicated by the logo next to the slot. The gold contacts on the card should be facing downwards. “D-Link” will be displayed on the screen as the router performs its initialization processes.
Caution: Always unplug and turn off the router before installing or removing the SIM card. Never insert or remove the SIM card while the router is in use.
Inserting a microSD Card
1.Ensure that your DWR-710 Le Petit HSPA+ Router is not plugged in.
2.Remove the cover.
3.Insert the microSD card into the slot and push it in until it locks into place.
D-Link DWR-710 User Manual |
4 |
Section 2 - Installation
Driver Installation
When you plug the DWR-710 into your computer, any necessary drivers will immediately install (with your permission).
Note: These drivers are Windows-only. Mac and Linux users will still be able to configure the DWR-710 using the web configuration utility described in “Configuration Utility” on page 10.
D-Link DWR-710 User Manual |
5 |
Section 2 - Installation
Wireless Installation Considerations
The DWR-710 can be accessed using a wireless connection from anywhere within the operating range of its wireless network. Keep in mind that the quantity, thickness, and location of walls, ceilings, or other objects that the wireless signals must pass through may adversely affect wireless signals. Ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or office. The key to maximizing the wireless range is to follow these basic guidelines:
1.Minimize the number of walls and ceilings between the router and other network devices. Each wall or ceiling can reduce your adapter’s range from 3 to 90 feet (1 to 30 meters).
2.Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters) appears to be almost 3 feet (1 meter) thick at a 45-degree angle. At a 2-degree angle it appears over 42 feet (14 meters) thick. Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
3.Try to position access points, wireless routers, and computers so that the signal passes through open doorways and drywall. Materials such as glass, metal, brick, insulation, concrete, and water can affect wireless performance. Large objects such as fish tanks, mirrors, file cabinets, metal doors, and aluminum studs may also have a negative effect on range.
4.If you are using a 2.4 GHz cordless phone, make sure that the 2.4 GHz phone base is as far away from your wireless device as possible. The base transmits a signal even if the phone is not in use. In some cases, cordless phones, X-10 wireless devices, and electronic equipment such as ceiling fans, fluorescent lights, and home security systems may dramatically degrade wireless connectivity.
D-Link DWR-710 User Manual |
6 |
Section 2 - Installation
Configuration
This section will show you how to configure your new D-Link mobile router using the configuration utility that can be obtained through a software interface or a web-based user interface.
Initial Connection to the Router
When configuring the router for the first time, you will need to establish a direct connection with the router in order to access the web-based configuration utility. This can be done by connecting the router to a powered USB port. Once you have configured your router, you will be able to connect using the Wi-Fi settings that you have specified in the configuration process. Ensure that the router is connected before commencing the setup process.
Connect via USB
To connect to the router via USB, plug the router into an available USB port on your computer. Your router is now ready for configuration, please refer to “Configuration Utility” on page 10 to continue the setup process.
D-Link DWR-710 User Manual |
7 |
Section 2 - Installation
Connect via Wi-Fi
Note: The following example uses Windows 7’s built-in wireless connection utility. If you are using a different operating system, or a third party connection utility, the process may be different. Please refer to the documentation that came with your operating system or wireless client for further information on how to connect to a wireless network.
To connect to the router using Wi-Fi, open your operating system’s wireless networking utility and scan for available networks to connect to. By default, the network name (SSID) of the DWR-710 will be in the format dlink_DWR-710xxxx, where “xxxx” represents the last four character’s of the router’s MAC address.
You will then be prompted to enter the network security key for your router. The unique security key for your router will be displayed on a sticker in the router’s battery bay. Enter the security key in the box provided and click OK. Your wireless connection utility should confirm that the connection is successful, and you can move to the next step to continue to configuration process.
D-Link DWR-710 User Manual |
8 |
Section 2 - Installation
Once you have located this network with your wireless utility, connect to the network using your wireless networking utility.
D-Link DWR-710 User Manual |
9 |
Section 3 - Configuration
Web-based Configuration
To access the configuration utility, open a web browser (such as Internet Explorer) and enter the IP address of the router, which is 192.168.0.1 by default.
Configuration Utility
Once you have reached the configuration utility through the installed software or your web browser, you will need to log in. Enter admin as the username, and then enter the password. By default, the password is blank. You can also select your language from the drop-down menu.
Click Login to continue.
D-Link DWR-710 User Manual |
10 |
Section 3 - Configuration
Home
Navigation
Throughout the interface you will find a menu bar at the top of the page which includes tabs for easy navigation, and a summary bar in the upper right corner with a quick view of essential information.
Home The Home tab will return you the home page, where a summary of the system information is shown.
Wizard: Click on this tab to start the setup wizard, which will guide you through the basic setup process.
Internet: The Internet tab gives you Internet setup and settings options.
Network: The Network tab allows you to configure the network settings for your Local Area Network (LAN).
SMS: From the SMS you can view and send SMS messages via your mobile network.
Wi-Fi: The Wi-Fi allows you to configure your Wi-Fi network, as well as add new devices using WPS.
Security: The Security tab allows you to configure firewall and security settings to protect your network from WAN-side intrusions.
Application: From this tab, you can manage the administrative configuration of your router, such as time and date, firmware, language, and remote management.
D-Link DWR-710 User Manual |
11 |
Section 3 - Configuration
Device Status
A summary of the device’s current status will be displayed on the information panel at the top of the right-hand side of the navigation bar. The following is a description of the indications, from left to right.
SIM: This icon shows whether or not a compatible (U)SIM card has been inserted into the device.
SMS: The number to the right of this icon indicates the number of unread messages in the SMS inbox.
Signal Strength: Indicates the current strength of the mobile network signal being received.
Operator Name: The name of the mobile network operator to which the device is currently connected.
Roaming: Indicates that the device is connected to a network other than your service provider’s home network.
Internet: Indicates that there is an Internet connection present.
Wi-Fi Network: Indicates that the router’s Wi-Fi network is currently active. The number to the right of this icon indicates the number of wireless clients currently connected to the router’s Wi-Fi network.
Logout: Click this button to log out of the configuration interface.
D-Link DWR-710 User Manual |
12 |
Section 3 - Configuration
Home
The Home page acts as a dashboard to quickly display your configuration settings and provide a summary of the current status of your network’s status.
System Resources: This area displays the percentage of the router’s memory and
CPU currently being used by the system.
LAN: This area displays a summary of the current settings for the router’s LAN.
2G/3G Modem: This area shows the current status of your 2G or 3G mobile network connection.
WAN: This area displays a summary of the router’s current WAN settings. These details will reflect the mobile network connection which is being received from the service provider.
Traffic Statistics: This area shows the amount of data which has been sent (TX) and received (RX) over the mobile network. This information may not reflect the amount recorded by your mobile service provider.
D-Link DWR-710 User Manual |
13 |
Section 3 - Configuration
Wizard
The Wizard page will guide you through the steps required to configure the basic settings of your router such as the IP address, network name (SSID), and password. Click on the Wizard button on the navigation bar to commence the wizard.
LAN Configuration
IP Address: If you wish to change the router’s IP address, enter the new address here. If you change the IP address from the default, you will need to enter the new address in your Internet browser’s address bar in order to access the web-based configuration utility.
IP Subnet Mask: If you wish to change the router’s subnet mask, enter it here.
Click Next to continue.
2/3G Configuration
If you wish to change the 2G or 3G service provider or connection type, click on a profile in the list to highlight it, and click Set to set that profile as the default.
Click Next to continue, or Back to return to the previous step.
D-Link DWR-710 User Manual |
14 |
Section 3 - Configuration
Wi-Fi Configuration
Password Setting: Choose a password for your wireless security. Clients will need this password in order to access your network
wirelessly. If you are currently connected to the router using Wi-Fi, you will need to reconnect to the router using your new password once the wizard has been completed.
SSID: If you wish to change your wireless network name (SSID), enter a new name in the field provided. If you change the SSID, you may need to re-connect to the router using the new SSID before you can access your network or the configuration utility.
Click Done to complete the wizard, or click Back to return to the previous page.
After you have clicked Done, a confirmation window will appear. Click OK to save the configuration.
D-Link DWR-710 User Manual |
15 |
Section 3 - Configuration
Internet
Connection
This page allows you to configure the Internet settings for your mobile network connection. Use the tabs in the left-hand column to navigate through the different settings categories.
Connection Operation
Flight Mode: Flight mode turns off all communications so that the device can be powered on safely when in an aircraft. Select whether you want to Enable or Disable flight mode from the dropdown menu, and click Change to effect the change.
Preferred Cellular Select your preferred cellular network connection mode: Network: Auto Mode - The router will automatically connect to your
preferred mobile network and remain connected while the device is powered on.
Manual Mode - You must manually connect to the preferred mobile network.
On Demand - The router will connect to the preferred mobile network when Internet access is required.
Click Change to effect the change.
Roaming Mode: Select whether you would like to Enable or Disable mobile network roaming from the drop-down menu.
Caution: Roaming on networks other than your own may incur additional usage charges.
D-Link DWR-710 User Manual |
16 |
Section 3 - Configuration
Connection: Shows the type and status of the current mobile connection. To change the connection profile, select a user profile from the table below and click Set to activate the profile. Click Disconnect to manually disconnect the current mobile data service.
Profiles: The profiles table shows the details of currently configured user profiles. To add a new user profile, navigate to the User Profile tab at the top of this section.
User Profile
Click Add to add a new user profile.
Name: Enter a name to identify the new user profile.
APN: Enter the Access Point Name (APN) for the connection. If you do not know this information, please contact your service provider.
Protocol: Select the protocol to be used for the connection from the drop-down menu.
User: Enter the username to be used for this connection.
Password: Enter the password to be used for this connection.
Delete: Click the delete icon to delete this profile from the list.
Click OK to save the profile.
Click Apply to apply the profile settings and return to the
Internet menu.
D-Link DWR-710 User Manual |
17 |
Section 3 - Configuration
2G/3G Modem
This section displays information about your 2G or 3G modem connection.
Information
Information: Displays information about your 2G or 3G modem.
Settings
Network: Select your preferred modem type from the drop-down menu:
Auto - The modem will automatically select the modem type depending on the network it is connected to.
3G Only - The modem will only connect to 3G networks. 2G Only - The modem will only connect to 2G networks.
If you wish to change the modem type, select your new modem type and click Change to effect the change. Re-enter the new PIN code.
Click Apply to apply the changes.
D-Link DWR-710 User Manual |
18 |
Section 3 - Configuration
SIM
This section allows you to turn SIM lock on or off for the SIM card which is currently inserted into the router.
PIN Code: Enter the PIN code for the SIM card. Click Enable to turn on
SIM lock, or click Disable to turn off SIM lock.
D-Link DWR-710 User Manual |
19 |