D Link WR510A1 User Manual

User Manual

DWR-510 V0.1 (Draft)

DWR-510

HSPA USB Dongle Router

User Manual

- 1 -

User Manual

DWR-510 V0.1 (Draft)

I. Introduction

iiii. Overview

. Overview

. Overview. Overview

DWR-510 HSPA USB Dongle Router – is a highly integrated wireless solution for 3G and WiFi.
The demands of data communication everywhere becomes more due to the great development of
3G HSPA system. DWR-510 adopts Qualcomm MSM6290 solution. It provides up to 7.2 Mbps
HSDPA, up to 5.76 Mbps HSUPA, RX antenna diversity and wireless router etc. DWR-510 is fast,
reliable and easy to operate. Therefore, user can experience the new features and surf the internet
everywhere by DWR-510 dongle router.

ii. Features

◎HSUPA data rate up to 5.76 Mbps
◎HSDPA data rate up to 7.2 Mbps
◎UMTS PS domain data rate up to 384 kbps
◎EDGE packet data rate up to 236.8 kbps
◎GPRS packet data rate up to 115.2 kbps

◎WiFi 802.11 b/g/n
◎Share internet connection with 6 WiFi devices
◎A slide switch to select between WiFi router mode and PC USB modem mode

◎USB interface
◎Multi-color LED indicating status of network connection

◎Support Microsoft Windows XP / Vista / Windows 7
◎Support Linux (Router mode only)
◎Support Mac OS (Router mode only)

iii. Product Review

◎Modem mode

Modem mode provides the 3G access only from USB interface. User needs to set the slide switch to
modem mode then device will operate in 3G USB modem mode. User needs to launch connection
manager utility to access 3G data transaction.

- 2 -

User Manual

DWR-510 V0.1 (Draft)

Modem Mode

Modem Mode Switch configuration

◎Router Mode

DWR-510 will become 3G / WiFi Router in this mode and can share 3G bandwidth to other devices
that connect to DWR-510 by WiFi. DWR-510 allows up to 8 WiFi enabled devices to
simultaneously connect to the Internet.

- 3 -

User Manual

DWR-510 V0.1 (Draft)

Router Mode

It is recommended to choose this mode when there is no access point showed in your wireless
network.

Router Mode Switch configuration

- 4 -

User Manual

DWR-510 V0.1 (Draft)

II. Installation

i. System Requirements

Before you install DWR-510, please make sure your system meets the following requirements.

*Desktop or Laptop or applications with USB 1.1/2.0 port
*Minimum of 64MB system memory
*Operating system: XP/Vista/ Windows 7

ii. Hardware Installation

1. Find an available USB 1.1/2.0 port on your desktop or laptop or other applications.

2. Plug DWR-510 USB adapter into USB port of desktop or laptop or other applications.

iii. Setup: Windows XP OS

If your computer is running a Windows operating system, it will automatically detect the DWR-510
after device plug into the USB port, and OS displays a “Found New Hardware” window.

- 5 -

User Manual

DWR-510 V0.1 (Draft)

1. Find out the Driver, and launch the Hardware Wizard

2. Please click “Yes, now and every time I connect a device” circle, and “Next>” button.

- 6 -

User Manual

DWR-510 V0.1 (Draft)

3. Please click “Install the software automatically (Recommended)”, and “Next>” button

4. The Hardware Wizard will automatically install the software

- 7 -

User Manual

DWR-510 V0.1 (Draft)

5. If you see the warning Windows Logo testing message, please click “Continue Anyway”

6. Please wait the software installation.

- 8 -

User Manual

DWR-510 V0.1 (Draft)

7. After the “Completing the Found New Hardware Wizard” windows appear, click “Finish”

button.

- 9 -