D Link IR815D1 User Manual

Version 1.01 | 09/15/2017
User Manual
AC1200 Wi-Fi Router
DIR-815
Preface
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes.
Manual Revisions
1.0 3 January, 2017 Initial release for revision D1
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Internet Explorer®, Windows® and the Windows logo are trademarks of the Microsoft group of companies.
Copyright © 2017 by D-Link Corporation, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc.
The purpose of this product is to create a constant network connection for your devices. As such, it does not have a standby mode or use a power management mode. If you wish to power down this product, please simply unplug it from the power outlet.
Power Usage
This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned o through a power switch to save energy when it is not needed.
Network Standby: 5.19 watts Switched O: 0.26 watts
iD-Link DIR-815 User Manual
Table of Contents
Table of Contents
Package Contents .............................................................. 1
System Requirements ................................................................. 2
Introduction ................................................................................... 3
Features ............................................................................................4
Hardware Overview ..................................................................... 5
LEDs ........................................................................................... 5
Connections ........................................................................... 6
Installation ......................................................................... 7
Before You Begin ........................................................................... 7
Wireless Installation Considerations ......................................8
Hardware Setup ............................................................................9
Completing Setup ......................................................................12
Setup Wizard ................................................................................13
Conguration ................................................................... 21
Web UI Table of Contents ........................................................22
Setup ...............................................................................................23
Internet ...................................................................................24
Internet Connection Setup Wizard .......................... 25
Manual Internet Connection Setup ........................33
Wireless Settings .................................................................43
Wireless Connection Setup Wizard..........................44
Add Wireless Device with WPS .................................. 47
Manual Wireless Connection Setup ........................50
Wireless Security Mode ...............................................52
Network Settings ................................................................54
Storage ...................................................................................57
IPv6 ..........................................................................................58
IPv6 Internet Connection Setup Wizard ................59
IPv6 Local Connectivity Settings ..............................63
Manual IPv6 Internet Connection Setup ............... 64
Advanced ......................................................................................80
Virtual Server ........................................................................ 81
Port Forwarding ..................................................................82
Application Rules ................................................................83
QOS Engine ...........................................................................84
Network Filter.......................................................................86
Inbound Filter ......................................................................87
Access Control .....................................................................88
Add Policy .........................................................................89
Website Filter ........................................................................92
Firewall Settings ..................................................................93
Routing ...................................................................................95
Advanced Wireless .............................................................96
Wi-Fi Protected Setup .......................................................97
Advanced Network ............................................................98
Guest Zone ............................................................................99
IPv6 Firewall ....................................................................... 100
IPv6 Routing ...................................................................... 102
Tools ............................................................................................. 103
Admin .................................................................................. 104
Time ...................................................................................... 105
Syslog ................................................................................... 106
Email Settings ................................................................... 107
iiD-Link DIR-815 User Manual
Table of Contents
System ................................................................................. 109
Firmware ............................................................................. 110
Dynamic DNS .................................................................... 111
System Check .................................................................... 112
Schedules ........................................................................... 113
Status ........................................................................................... 114
Device Info ......................................................................... 115
Logs ...................................................................................... 117
Statistics .............................................................................. 118
Internet Sessions .............................................................. 119
Wireless ...............................................................................120
Routing ................................................................................ 121
IPV6 ....................................................................................... 122
IPv6 Routing ...................................................................... 123
Support ....................................................................................... 124
Connect and Share a USB Storage Device ...................125
WPA/WPA2 ......................................................................... 146
Troubleshooting ............................................................ 148
Wireless Basics ...............................................................152
What is Wireless? ...................................................................... 153
Tips ................................................................................................ 155
Wireless Modes .........................................................................156
Networking Basics .........................................................157
Check your IP address ............................................................ 157
Statically Assign an IP address ............................................ 158
Wireless Security ......................................................... 159
What is WPA? ................................................................ 159
Technical Specications ................................................160
Regulatory Information ................................................161
Connecting from a Windows-Based PC ........................... 126
Connecting from a Mac ......................................................... 131
Connect a Wireless Client to Your Router ..................... 134
WPS Button ................................................................................ 134
Windows® 10 ............................................................................. 135
Windows® 8 ................................................................................137
WPA/WPA2 ......................................................................... 137
Windows® 7 ................................................................................139
WPA/WPA2 ......................................................................... 139
WPS ....................................................................................... 141
Windows Vista® .........................................................................145
iiiD-Link DIR-815 User Manual
Section 1 - Product Overview
DIR-815 AC1200 Wi-Fi Router
Power Adapter
Ethernet Cable

Package Contents

Wi-Fi Conguration Card
Quick Install Guide
If any of the above items are missing, please contact your reseller.
Note: Using a power supply with a dierent voltage rating than the one included with the DIR-815 will cause damage and void the warranty for this product.
1D-Link DIR-815 User Manual
Section 1 - Product Overview
Network Requirements
Web-based Conguration
Utility Requirements

System Requirements

• An Ethernet-based cable or DSL modem
• IEEE 802.11ac, 802.11n, 802.11a, 802.11g, or 802.11b wireless clients
• 10/100 Ethernet
Computer with the following:
• Windows®, Macintosh, or Linux-based operating system
• An installed Ethernet adapter
Browser Requirements:
• Internet Explorer 9 or higher
• Firefox 20 or higher
• Safari 5.1 or higher
• Chrome 25 or higher
Windows
Visit www.java.com to download the latest version.
®
Users: Make sure you have the latest version of Java installed.
2D-Link DIR-815 User Manual
Section 1 - Product Overview

Introduction

The D-Link DIR-815 AC1200 Wi-Fi Router shares your Internet connection over a blazing-fast wireless connection of up to 1200 Mbps (up to 866 Mbps over 5 GHz Wireless AC and up to 300 Mbps over 2.4 GHz Wireless N)1, using advanced AC beamforming technology to signicantly outperform
802.11n and other 802.11ac devices. Equipped with one Fast Ethernet WAN/Internet port and four Fast Ethernet LAN ports, providing speeds up to 10 times faster than standard 10/100 ports and creating the best networking experience to date.
Featuring four antennas, the AC1200 Wi-Fi Router oers better data rates, fewer dead-spots, more coverage, and higher reliability. Operating exclusively in the 5 GHz band, the DIR-815’s 802.11ac wireless connections avoid the crowded 2.4 GHz band, giving you faster speeds while still maintaining backwards compatibility with older 802.11n/g/b devices. A stronger Wi-Fi signal means you can install more wireless surveillance cameras, baby monitors, sensors, and alarms in the places where you need them.
The DIR-815 supports the latest security features to help prevent unauthorized access. Support for WPA™ and WPA2™ standards ensure that you will be able to use the best possible encryption regardless of your client devices. This router is also equipped with a dual-active rewall (SPI and NAT) to prevent potential attacks over the Internet.
The DIR-815 is full of features to improve your home network. The built-in USB 2.0 port lets you easily share a USB storage drive with all the devices on your local network. The rich parental controls allow you to easily control when the Internet should be available in your home and what content is allowed. With all this and more, the DIR-815 AC1200 Wi-Fi Router will serve your network well for years to come.
1 Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and 802.11ac specications. Actual data throughput will vary. Network conditions and
environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.
3D-Link DIR-815 User Manual
Section 1 - Product Overview

Features

Excellent Wireless Networking - The DIR-815 provides wireless speeds of up to a combined 1200 Mbps (866 Mbps 802.11ac 5
GHz, plus 300 Mbps 802.11n 2.4 GHz)1. This capability rivals wired connections, allowing users to participate in real-time activities online, such as HD video communication, online gaming, and use mobile devices from anywhere in your home while still oering
full 802.11n/g/b backward compatibility.
Fast Wired LAN and WAN Networking - With four 10/100 Fast Ethernet LAN ports, and a 10/100 Fast Ethernet WAN port, the DIR-815 has a high amount of bandwidth to take full advantage of the highest speed broadband connections available.
IPv6 Support - The DIR-815 fully supports IPv6 and includes support for a variety of IPv6 connection types including: SLAAC/DHCPv6, 6to4, 6rd, Static IPv6, IPv6 PPPoE, IPv6 in IPv4 tunneling, and local connectivity.
Advanced Firewall Features - The web-based user interface displays a number of advanced network management features. Easily apply content ltering based on MAC address, URL, and/or domain name. Schedule these lters to be active on certain days or for a duration of hours or minutes.
Secure Multiple/Concurrent Sessions - The DIR-815 can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-815 can securely access corporate networks.
User-friendly Setup Wizard - Through its easy-to-use web-based, the DIR-815 lets you quickly congure and secure your router to your specic settings in minutes.
1 Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and 802.11ac specications. Actual data throughput will vary. Network
conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.
4D-Link DIR-815 User Manual
Section 1 - Product Overview

Hardware Overview

LEDs

1 2 3 4 5 76
1 Power The Power LED indicates that the device is powered on with a proper connection to the power supply.
2
3
4
5
6
7
Internet The Internet LED indicates that an Internet link is established. It blinks during data transmission.
WPS The WPS LED blinks during the WPS pairing process.
2.4 GHz Wireless The Wireless LED indicates that this wireless band is working. It blinks during wireless data transmission.
5 GHz Wireless The Wireless LED indicates that this wireless band is working. It blinks during wireless data transmission.
LAN Port (1-4) The LAN Port LEDs indicate an Ethernet device is connected. They blink during data transmission.
USB The USB LED indicates that a USB device is connected to the USB 2.0 port.
5D-Link DIR-815 User Manual
Section 1 - Product Overview
Hardware Overview

Connections

1 WPS Button Press to start the WPS process and automatically create a secure connection to a WPS client.
2 Reset Button (on bottom) Insert a paperclip in the hole, wait for 10 seconds, and release to reset the router to default settings.
3 Wi-Fi Button Press to enable or disable the wireless networks.
4 LAN Ports (1-4) Connect Ethernet devices such as computers, switches, storage (NAS) devices and game consoles.
5 Internet Port Using an Ethernet cable, connect your broadband modem to this port.
6 USB Port Connect a USB ash drive to share on your network.
7 Power Connector Connector for the supplied power adapter.
8 Power Button Press the power button to power the device on and o.
6D-Link DIR-815 User Manual
Section 2 - Installation

Installation

Before You Begin

• Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, attic, or garage.
• Congure the router with the computer that was last connected directly to your Internet connection. Verify that it is connected to
the Internet before connecting additional devices.
• If your ISP provided you with a modem/router combo, you will need to set it to “bridge” mode so the router can work properly. Please
contact your Internet Service Provider (ISP) or refer to the user manual for your modem/router device.
• You can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then you must
turn o your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet).
• If connecting to a DSL modem, make sure to have your DSL service information provided by your Internet Service Provider handy.
This information is likely to include your DSL account's username and password. Your ISP may also supply you with additional WAN conguration settings which might be necessary to establish a connection.
• If you are connecting a considerable amount of networking equipment, it may be a good idea to take the time to label each cable
or take a picture of your existing setup before making any changes.
• If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoET, BroadJump,
or EnterNet 300 from your computer or you will not be able to connect to the Internet.
7D-Link DIR-815 User Manual
Section 2 - Installation

Wireless Installation Considerations

This D-Link wireless device lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling
can reduce your adapter’s range from 1 to 30 meters (3 to 90 feet). Position your devices so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 0.5 meters (1.5 feet) thick, at a 45-degree angle appears to be
almost 1 meter (3 feet) thick. At a 2-degree angle it looks over 14 meters (42 feet) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
3. Building materials make a dierence. A solid metal door or aluminum studs may have a negative eect on range. Try to position
access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away at least 1 to 2 meters (3 to 6 feet) from electrical devices or appliances that generate RF noise.
5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your
wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not in use.
8D-Link DIR-815 User Manual
Section 2 - Installation

Hardware Setup

1. The DIR-815 is designed to give you the fastest, most stable network connection possible. In order to maximize performance, fully extend
the antennas to provide optimal wireless coverage. Keep the router in an open area for better wireless coverage.
DIR-815
2. Position your DIR-815 near your Internet-connected modem. Place it in an open area for better wireless coverage.
DIR-815
3. Turn o and unplug the power and Ethernet cable to your cable or DSL broadband modem. This is required. In some cases, you may need
to turn it o for up to ve minutes.
DIR-815
Modem
Modem
9D-Link DIR-815 User Manual
Section 2 - Installation
Hardware Setup (continued)
4. Use the included Ethernet cable to connect your modem to the yellow port labeled INTERNET on the router.
DIR-815
5. Turn on or plug your modem back in and wait approximately one minute before proceeding onward.
DIR-815
6. Connect the supplied power adapter to the router and a power outlet, press the power button, and verify that the power LED is lit. Allow
1 minute for the router to boot up.
Modem
Modem
DIR-815
Modem
10D-Link DIR-815 User Manual
Section 2 - Installation
Hardware Setup (continued)
7. If you are conguring the DIR-815 wirelessly from a PC, connect to a Wi-Fi network printed on the included Wi-Fi conguration card. You
can also nd the Wi-Fi network names and passwords printed on the label attached to the bottom of your router.
DIR-815
Modem
Wi-Fi Conguration Card
If you are conguring the DIR-815 from a PC with a wired Ethernet connection, plug one end of an Ethernet cable into the port labeled 1 on the back of the router, and the other end into the Ethernet port on your computer.
DIR-815
Modem
8. If you are connecting to a broadband service that uses a dynamic connection (not PPPoE), you may be online already. Try opening a web
browser and connecting to a website. If the website does not load, proceed to Completing Setup on page 12.
11D-Link DIR-815 User Manual
Section 2 - Installation

Completing Setup

There are several dierent ways you can congure your router to connect to the Internet and connect to your clients:
D-Link Setup Wizard - This wizard will launch when you log into the router for the rst time, refer to Setup Wizard on page 13.
Manual Setup - Log into the router and manually congure your router, refer to Conguration on page 21.
12D-Link DIR-815 User Manual
Section 2 - Installation

Setup Wizard

If this is your first time installing the router, open your web browser and enter http://dlinkrouter.local./ in the address bar. Alternatively, enter the IP address of the router (default: http://192.168.0.1). The rst time you log in, the setup wizard will run.
WELCOME TO THE DLINK SETUP WIZARD
The wizard is designed to guide you through a step-by-step process to congure your new D-Link router and connect to the Internet.
Click Next to continue.
WELCOME TO THE D-LINK SETUP WIZARD
This wizard will guide you through a step-by-step process to congure your new D-Link router and connect to the
Internet.
• Step 1: Congure your Internet Connection
Step 2: Congure your Wi-Fi Security
• Step 3: Set your Password
• Step 4: Select your Time Zone
Step 5: Conrm Wi-Fi Settings
Cancel Next
13D-Link DIR-815 User Manual
Section 2 - Installation
Step 1 - Congure Your Internet Connection
STEP 1: CONFIGURE YOUR INTERNET CONNECTION
Please wait while your router attempts to detect your Internet connection type. You may need to enter information such as your ISP account username and password.
Next to continue.
STEP 1: CONFIGURE YOUR INTERNET CONNECTION
Select the connection type your ISP uses.
If you select DHCP Connection (Dynamic IP Address), proceed to Step 2 - Congure Your Wi-Fi Security on page 19.
For Username / Password Connection (PPPoE) setup help refer to page 15.
For Username / Password Connection (PPTP) setup help refer to page 15.
STEP 1: CONFIGURE YOUR INTERNET CONNECTION
The router is detecting your Internet connection type, please wait...
Cancel Prev Next
STEP 1: CONFIGURE YOUR INTERNET CONNECTION
If your Internet Service Provider was not listed or you don’t know who it is, please select the Internet connection type
below:
DHCP Connection (Dynamic IP Address)
Choose this if your Internet connection automatically provides you with an IP Address. Most Cable Modems use this type of connection.
Username / Password Connection (PPPoE)
Choose this option if your Internet connection requires a username and password to get online. Most DSL modems use this type of connection.
Username / Password Connection (PPTP)
PPTP client.
Username / Password Connection (L2TP)
L2TP client.
Static IP Address Connection
Choose this option if your Internet Setup Provider provided you with IP Address information that has to be manually congured.
Cancel Prev Next
For Username / Password Connection (L2TP) setup help refer to page 16.
For Static IP Address Connection setup help refer to page 18.
Select your connection type and click Next to continue.
14D-Link DIR-815 User Manual
Section 2 - Installation
Username / Password Connection (PPPoE)
If you chose Username / Password Connection (PPPoE) as your Internet Connection, congure the following settings:
SET USERNAME AND PASSWORD CONNECTION (PPPOE)
SET USERNAME AND PASSWORD CONNECTION PPPOE
Username: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
To set up this connection you will need to have a Username and Password from your Internet Service Provider. If you do not have this information, please contact your ISP.
User Name :
Password :
Cancel Prev Next
Click Next and proceed to Step 2 - Congure Your Wi-Fi Security on page 19.
Username / Password Connection (PPTP)
If you choose Username / Password Connection (PPTP) as your Internet Connection, enter your IP address, congure the following settings:
SET USERNAME AND PASSWORD CONNECTION (PPTP)
SET USERNAME AND PASSWORD CONNECTION PPTP
Address Mode: Select either Dynamic IP or Static IP
If you choose Static IP as the Address Mode, enter your IP address:
PPTP IP Address: Enter the PPTP IP Address provided by your ISP.
PPTP Subnet
Mask:
PPTP Gateway IP
Address:
Enter the PPTP Subnet Mask provided by your ISP.
Enter the PPTP Gateway IP Address provided by your ISP.
To set up this connection you will need to have a Username and Password from your Internet Service Provider. You also
need PPTP IP address. If you do not have this information, please contact your ISP.
DNS SETTINGS
Address Mode :
PPTP IP Address :
PPTP Subnet Mask :
PPTP Gateway IP Address :
PPTP Server IP Address (may be
same as gateway):
Verify Password :
Primary DNS Address :
Secondary DNS Address :
Dynamic IP Static IP
User Name :
Password :
Cancel Prev Next
If you choose Dynamic IP or Static IP as the Address Mode, enter your PPTP Server IP address:
PPTP Server IP
Enter the PPTP Server IP address provided by your ISP.
Address:
15D-Link DIR-815 User Manual
Section 2 - Installation
Username / Password Connection (PPTP) (continued)
User Name: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Verify Password: Enter the password provided by your ISP one more time.
DNS SETTINGS
Primary DNS
Server:
Secondary DNS
Enter the primary DNS server IP addresses.
Enter the secondary DNS server IP addresses.
SET USERNAME AND PASSWORD CONNECTION (PPTP)
To set up this connection you will need to have a Username and Password from your Internet Service Provider. You also
need PPTP IP address. If you do not have this information, please contact your ISP.
DNS SETTINGS
Address Mode :
PPTP IP Address :
PPTP Subnet Mask :
PPTP Gateway IP Address :
PPTP Server IP Address (may be
same as gateway):
Verify Password :
Primary DNS Address :
Secondary DNS Address :
Dynamic IP Static IP
User Name :
Password :
Cancel Prev Next
Server:
Click Next and proceed to Step 2 - Congure Your Wi-Fi Security on page 19.
Username / Password Connection (L2TP)
If you choose Username / Password Connection (L2TP) as your Internet Connection, enter your IP address, congure the following settings:
SET USERNAME AND PASSWORD CONNECTION L2TP
Address Mode: Select either Dynamic IP or Static IP
If you choose Static IP as the Address Mode, enter your IP address:
L2TP IP Address: Enter the L2TP IP Address provided by your ISP.
L2TP Subnet
Mask:
L2TP Gateway IP
Address:
Enter the L2TP Subnet Mask provided by your ISP.
Enter the L2TP Gateway IP Address provided by your ISP.
SET USERNAME AND PASSWORD CONNECTION (L2TP)
To set up this connection you will need to have a Username and Password from your Internet Service Provider. You also
need L2TP IP address. If you do not have this information, please contact your ISP.
DNS SETTINGS
Address Mode :
L2TP IP Address :
L2TP Subnet Mask :
L2TP Gateway IP Address :
L2TP Server IP Address :
User Name :
Password :
Verify Password :
Primary DNS Address :
Secondary DNS Address :
Cancel Prev Next
Dynamic IP Static IP
(may be same as gateway)
(optional)
16D-Link DIR-815 User Manual
Section 2 - Installation
Username / Password Connection (L2TP) (continued)
If you choose Dynamic IP or Static IP as the Address Mode, enter your PPTP Server IP address:
L2TP Server IP
Enter the L2TP Server IP address provided by your ISP.
Address:
Username: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Verify Password: Enter the password provided by your ISP one more time.
DNS SETTINGS
Primary DNS
Server:
Secondary DNS
Server:
Click Next and proceed to Step 2 - Congure Your Wi-Fi Security on page 19.
Enter the primary DNS server IP addresses.
Enter the secondary DNS server IP addresses.
SET USERNAME AND PASSWORD CONNECTION (L2TP)
To set up this connection you will need to have a Username and Password from your Internet Service Provider. You also
need L2TP IP address. If you do not have this information, please contact your ISP.
DNS SETTINGS
Address Mode :
L2TP IP Address :
L2TP Subnet Mask :
L2TP Gateway IP Address :
L2TP Server IP Address :
User Name :
Password :
Verify Password :
Primary DNS Address :
Secondary DNS Address :
Cancel Prev Next
Dynamic IP Static IP
(may be same as gateway)
(optional)
17D-Link DIR-815 User Manual
Section 2 - Installation
Static IP Address Connection
If you choose Static IP Address Connection as your Internet Connection, enter your IP address, congure the following settings:
SET STATIC IP ADDRESS CONNECTION
SET STATIC IP ADDRESS CONNECTION
IP Address: Enter the IP address provided by your ISP.
Subnet Mask: Enter the subnet mask.
Default Gateway: Enter the default gateway.
DNS SETTINGS
To set up this connection you will need to have a complete list of IP information provided by your Internet Service Provider. If you have a Static IP connection and do not have this information, please contact your ISP.
IP Address :
Subnet Mask :
Default Gateway :
DNS SETTINGS
Primary DNS Address :
Secondary DNS Address : (optional)
Cancel Prev Next
Primary DNS
Enter the primary DNS server IP addresses.
Server:
Secondary DNS
Enter the secondary DNS server IP addresses.
Server:
Click Next and proceed to Step 2 - Congure Your Wi-Fi Security on page 19.
18D-Link DIR-815 User Manual
Section 2 - Installation
STEP 2: CONFIGURE YOUR WIFI SECURITY
Wi-Fi Network
Name(SSID):
Step 2 - Congure Your Wi-Fi Security
Enter a name for the 2.4 GHz wireless network.
STEP 2: CONFIGURE YOUR WI-FI SECURITY
Give your Wi-Fi network a name and a password. (2.4GHz Band)
Wi-Fi Network Name(SSID) :
Your_2.4GHz_Network (Using up to 32 characters)
Wi-Fi Password :
A_Str0ng_P@ssWord! (Between 8 and 63 characters)
Wi-Fi Password: Enter a wireless password according to the onscreen guidelines.
Wi-Fi Network
Enter a name for the 5 GHz wireless network.
Name(SSID):
Wi-Fi Password: Enter a wireless password according to the onscreen guidelines.
Click Next to continue.
Step 3: Set Your Password
STEP 3: SET YOUR PASSWORD
Enter a new administration password. This is the password you will use to log in to the router.
Click Next to continue.
Step 4: Select Your Time Zone
Give your Wi-Fi network a name and a password. (5GHz Band)
Wi-Fi Network Name(SSID) :
Your_5GHz_Network (Using up to 32 characters)
Wi-Fi Password :
A_Str0ng_P@ssWord! (Between 8 and 63 characters)
Cancel Prev Next
STEP 3: SET YOUR PASSWORD
By default, your new D-Link Router does not have a password congured for administrator access to the Web-based conguration pages. To secure your new networking device, please set and verify a password below:
Password :
Verify Password :
Cancel Prev Next
STEP 4: SELECT YOUR TIME ZONE
Select your time zone. Click Next to continue.
STEP 4: SELECT YOUR TIME ZONE
Select the appropriate time zone for your location. This information is required to congure the time-based options for
the router.
Time Zone :
(GMT+08:00) Taipei
Cancel Prev Next
19D-Link DIR-815 User Manual
Section 2 - Installation
Step 5: Conrm Wi-Fi Settings
STEP 5: CONFIRM WIFI SETTINGS
Step 5 is a summary of your wireless settings. Click Next to nish the wizard.
STEP 5: CONFIRM WI-FI SETTINGS
Below is a detailed summary of your wireless security settings. Please print this page out, or write the information on a
piece of paper, so you can congure the correct settings on your Wi-Fi devices.
Wi-Fi Network Name(SSID) 2.4GHz : Your_2.4GHz_Network
Wi-Fi Password
Wi-Fi Network Name(SSID) 5GHz : Your_5GHz_Network
Wi-Fi Password
A_Str0ng_P@ssWord!
A_Str0ng_P@ssWord!
Cancel Prev Next
Congratulations, your device has been successfully congured. The router will reboot and display the login page.
LOGIN
Login to the router :
User Name :
Password :
Admin
Login
20D-Link DIR-815 User Manual
Section 3 - Conguration
Conguration
This section will show you how to congure or change the default settings your D-Link DIR-815 using the web-based conguration utility.
To access the conguration utility, open a web browser such as Internet Explorer and enter http://dlinkrouter.local./ or you may also connect by typing the IP address of the router (by default this is http://192.168.0.1) in the address bar.
Enter your password. If you previously followed the setup wizard, please use the admin password you entered during the wizard. Otherwise, leave the password blank. Click Login to proceed.
Note: If you cannot remember your password and cannot log in, press the reset button on the back of the device for longer than 10 seconds to restore the router to its default settings.
If you are having trouble logging in or experiencing trouble with the conguration utility, try clearing your browser cache or try using your web browser’s private browsing mode.
DIR-815
INTERNET
WIRELESS SETTINGS
NETWORK SETTINGS
STORAGE
IPV6
INTERNET CONNECTION
If you are conguring the device for the rst time, we recommend that you click on the Internet Connection Setup Wizard, and follow the instructions on the screen. If you wish to modify or congure the device settings manually, click the Manual Internet Connection
Setup.
INTERNET CONNECTION SETUP WIZARD
If you would like to utilize our easy to use Web-based Wizard to assist you in connecting your new D-Link Systems Router to the
Internet, click on the button below.
SETUP ADVANCED TOOLS STATUS SUPPORT
Internet Connection Setup Wizard
LOGIN
Login to the router :
User Name :
Password :
Admin
Login
Note:Before launching the wizard, please make sure you have followed all steps outlined in the Quick Installation Guide included in the
package.
21D-Link DIR-815 User Manual
Section 3 - Conguration

Web UI Table of Contents

The web-based interface is divided into 5 horizontal tabs, each with a vertical menu bar running along the left side. You may click on these section titles to quickly navigate to a section of this document.
DIR-815
SETUP ADVANCED TOOLS STATUS SUPPORT
INTERNET
WIRELESS SETTINGS
NETWORK SETTINGS
STORAGE
IPV6
VIRTUAL SERVER
PORT FORWARDING
APPLICATION RULES
QOS ENGINE
NETWORK FILTER
INBOUND FILTER
ACCESS CONTROL
WEBSITE FILTER
FIREWALL SETTINGS
ROUTING
ADVANCED WIRELESS
WI-FI PROTECTED SETUP
ADVANCED NETWORK
GUEST ZONE
ADMIN
TIME
SYSLOG
EMAIL SETTINGS
SYSTEM
FIRMWARE
DYNAMIC DNS
SYSTEM CHECK
SCHEDULES
DEVICE INFO
LOGS
STATISTICS
INTERNET SESSIONS
WIRELESS
ROUTING
IPV6
IPV6 ROUTING
MENU
SETUP
ADVANCED
TOOLS
STATUS
IPV6 FIREWALL
IPV6 ROUTING
To return to this Web UI Table of Contents page, simply click the D-Link logo on the top right of each page.
DIR-815
SETUP
INTERNET CONNECTIONINTERNET
22D-Link DIR-815 User Manual
Section 3 - Conguration
INTERNET CONNECTION
If you are conguring the device for the rst time, we recommend that you click on the Internet Connection Setup Wizard, and follow the instructions on the screen. If you wish to modify or congure the device settings manually, click the Manual Internet Connection Setup.
INTERNET CONNECTION SETUP WIZARD
If you would like to utilize our easy to use Web-based Wizard to assist you in connecting your new D-Link Systems Router to the Internet, click on the button below.
Internet Connection Setup Wizard
Note:Before launching the wizard, please make sure you have followed all steps outlined in the Quick Installation Guide included in the package.
MANUAL INTERNET CONNECTION OPTION
If you would like to congure the Internet settings of your new D-Link Router manually, then click on the button below.
Manual Internet Connection Setup

Setup

The Setup tab provides access to congure the basic conguration settings of your DIR-815.
DIR-815
INTERNET
WIRELESS SETTINGS
NETWORK SETTINGS
STORAGE
IPV6
SETUP ADVANCED TOOLS STATUS SUPPORT
To return to the Web UI Table of Contents page, simply click the D-Link logo on the top right of each page.
DIR-815
SETUP
INTERNET CONNECTIONINTERNET
23D-Link DIR-815 User Manual
Section 3 - Conguration

Internet

Click Internet on the navigation menu to congure your Internet connection. Using the Internet Connection Setup Wizard is recommended. To manually congure your Internet connection, select Manual Internet Connection Setup.
DIR-815
SETUP
INTERNET CONNECTION SETUP WIZARD
Click Internet Connection Setup Wizard to congure your Internet Connection. Refer to Internet Connection Setup Wizard on page 25.
MANUAL INTERNET CONNECTION OPTION
Click Manual Internet Connection Setup to manually add or congure your Internet connection. Refer to Manual Wireless Connection Setup on page 50.
INTERNET CONNECTIONINTERNET
INTERNET CONNECTION
If you are conguring the device for the rst time, we recommend that you click on the Internet Connection Setup Wizard, and follow the instructions on the screen. If you wish to modify or congure the device settings manually, click the Manual Internet Connection
Setup.
INTERNET CONNECTION SETUP WIZARD
If you would like to utilize our easy to use Web-based Wizard to assist you in connecting your new D-Link Systems Router to the
Internet, click on the button below.
Internet Connection Setup Wizard
Note:Before launching the wizard, please make sure you have followed all steps outlined in the Quick Installation Guide included in the
package.
MANUAL INTERNET CONNECTION OPTION
If you would like to congure the Internet settings of your new D-Link Router manually, then click on the button below.
Manual Internet Connection Setup
24D-Link DIR-815 User Manual
Section 3 - Conguration
Internet Connection Setup Wizard
This Internet Connection Setup Wizard will guide you through a step-by-step process to congure your new D-Link router and connect to the Internet.
STEP 1: SET YOUR PASSWORD
Enter a new administration password. This is the password you will use to log in to the router. Click Next to continue.
STEP 2: SELECT YOUR TIME ZONE
Select your time zone. Click Next to continue.
STEP 3: CONFIGURE YOUR INTERNET CONNECTION
Select the connection type your ISP uses and click Next to continue.
For DHCP setup help refer to page 26.
For PPPoE setup help refer to page 27.
For PPTP setup help refer to page 28.
WELCOME TO THE D-LINK INTERNET CONNECTION SETUP WIZARD
This wizard will guide you through a step-by-step process to congure your new D-Link router and connect to the
Internet.
• Step 1: Set your Password
• Step 2: Select your Time Zone
Step 3: Congure your Internet Connection
• Step 4: Save Settings and Connect
Prev Next Cancel Connect
STEP 1: SET YOUR PASSWORD
By default, your new D-Link Router does not have a password congured for administrator access to the Web-based conguration pages. To secure your new networking device, please set and verify a password below:
STEP 2: SELECT YOUR TIME ZONE
Select the appropriate time zone for your location. This information is required to congure the time-based options for
the router.
STEP 3: CONFIGURE YOUR INTERNET CONNECTION
Please select the Internet connection type below:
DHCP Connection (Dynamic IP Address)
Choose this if your Internet connection automatically provides you with an IP Address. Most Cable Modems use this type of connection.
Username / Password Connection (PPPoE)
Choose this option if your Internet connection requires a username and password to get online. Most DSL modems use this type of connection.
Username / Password Connection (PPTP)
Choose this option if your Internet connection requires a username and password to get online. Most DSL modems use this type of connection.
Username / Password Connection (L2TP)
Choose this option if your Internet connection requires a username and password to get online. Most DSL modems use this type of connection.
Static IP Address Connection
Choose this option if your Internet Setup Provider provided you with IP Address information that has to be manually congured.
Password :
Verify Password :
Prev Next Cancel Connect
Time Zone :
Prev Next Cancel Connect
Prev Next Cancel Connect
(GMT+08:00) Taipei
For L2TP setup help refer to page 30.
For Static IP Address Connection setup help refer to page 32.
25D-Link DIR-815 User Manual
Section 3 - Conguration
Internet Connection Setup Wizard (continued)
DHCP
If you choose DHCP Connection (Dynamic IP Address) as your Internet Connection, enter your IP address, congure the following settings:
DHCP CONNECTION (DYNAMIC IP ADDRESS)
DHCP CONNECTION DYNAMIC IP ADDRESS
MAC Address: If your Internet connection is tied to a specic PC or hardware, enter
it manually or click Clone Your PC’s MAC Address.
Host Name: Enter the host name of the router.
DNS SETTINGS
Primary DNS
Server:
Enter the primary DNS server IP addresses.
To set up this connection, please make sure that you are connected to the D-Link Router with the PC that was originally connected to your broadband connection. If you are, then click the Clone MAC button to copy your computer’s MAC Address to the D-Link Router.
Note: You may also need to provide a Host Name.If you do not have or know this information, please contact your ISP.
DNS SETTINGS
MAC Address :
Host Name : dlinkrouter
Primary DNS Address :
Secondary DNS Address :
Prev Next Cancel Connect
(optional)
Clone Your PC’s MAC Address
(optional)
Secondary DNS
Enter the secondary DNS server IP addresses.
Server :
Click Next to continue.
Click Connect to nish the setup.
SETUP COMPLETE!
SETUP COMPLETE!
The Internet Connection Setup Wizard has completed. Click the Connect button to save your settings.
Prev Next Cancel Connect
26D-Link DIR-815 User Manual
Loading...
+ 139 hidden pages