D-link DSM-910BT User Manual

This product will work
with audio players
and standard PC
speakers or powered
speaker sets.

DSM-910BTDSM-910BT

DSM-910BT

DSM-910BTDSM-910BT

Stereo to Speaker

Adapter Kit

Before You Begin

Y ou must have at least the following:

• Standard PC Speakers or Powered S peakers

• Audio Player

Check Y our Package Contents

These are the items included with your purchase: If any of the items below

are missing, please contact your reseller .

• DSM-100BT Bluetooth Speaker Adapter

• DSM-110BT Bluetooth Stereo to Speakers
Adapter

• 2 Power Adapters

• Audio Cables

©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of

their respective holders. Software and specifications subject to change without notice. DSM-910BT.12302003

Installing the DSM-100BT Speaker
Adapter

Connect the included antenna to
the antenna connector located on
the rear panel of the DSM-100BT .

Connect one end of the power
adapter to the power connector
located on the rear panel of the
DSM-100BT and the other end
to an available power strip or wall
outlet. The Power LED indicator

will light green to indicate that
the DSM-100BT is powered
on.

Connect your speaker’s audio
cable to the Audio Out connector
located on the rear panel of the
DSM-100BT . For connection to a
speaker system with RCA outputs,
you can use the included RCA to

3.5mm audio converter connector
for installing the DSM-100BT .

2