D Link CS932LA1 User Manual
Section 3 - mydlink Portal
Live Video
In the main part of the screen, the Live Video tab will be selected by default. If the camera is available, a Live Video feed will be
displayed. Video will be shown at VGA resolution (640x480) if viewing your camera from a PC on the same local network, or at
QVGA resolution (320x240) if viewing your camera from a PC on a remote network.
16D-Link DCS-932L User Manual
Section 3 - mydlink Portal
Camera Settings
The Camera Settings tab allows you to access your camera’s conguration interface. To open your camera’s conguration
interface, click Camera web page and enter the password exactly as listed on the Camera Settings page.
17D-Link DCS-932L User Manual
Section 3 - mydlink Portal
Camera Info
The Camera Info tab shows you various information about your camera.
Device Name: The Device Name is a unique name that you can give to
your device to help you identify it. Clicking on the Device Name will open
a window for you to log in to your camera’s conguration interface. Then,
it will open the Maintenance > Admin page where you can change your
Device Name.
Camera Password: Displays the current password for your camera’s
conguration interface. Clicking on the Show Password checkbox will
either show or hide the password. Clicking on the Password will open a
window for you to log in to your camera’s conguration interface. Then,
it will open the Maintenance > Admin page where you can change your
Password.
mydlink No.: Displays the mydlink number of your device.
Model Name: Displays the model name of your device.
MAC Address: Displays the MAC address of your device.
Device activated On: Displays the time and date that your device was
added to mydlink.
Support: This section provides you with links to various support websites
and downloads related to your product.
18D-Link DCS-932L User Manual
Section 4 - Conguration
Conguration
Using the Conguration Menu
After completing the Camera Installation Wizard, you are ready to use your camera. The camera’s built-in Web conguration utility is designed to
allow you to easily access and congure your DCS-932L. At the end of the wizard, click Go To Camera, or enter the IP address of your camera into
®
a web browser, such as Internet Explorer
not create a password, the default password is blank. After entering your password, click OK.
Note: If you are directly connecting your PC to the camera, or if you are using the camera on a closed network, the default IP is 192.168.0.20.
. To log in, use the User name admin and the password you created in the Installation Wizard. If you did
19D-Link DCS-932L User Manual
Section 4 - Conguration
Please make sure that you have the latest version of Java application installed on your computer to ensure proper operation when viewing the
video in Java mode. The Java application can be downloaded at no cost from Sun’s web site (http://www.java.com).
When you connect to the home page of your camera, you will be prompted to download ActiveX. If you want to use ActiveX to view your video
images instead of Java, then you must download ActiveX.
Function: Click the ActiveX or Java radio button to view live
video.
20D-Link DCS-932L User Manual
Section 4 - Conguration
Live Video
ActiveX:
Java:
For Windows® Users that do not have Java installed, please choose this option to
view video streaming on the Live Video page.
For Windows
Mac users must choose this mode to view video.
®
users that have Java installed, you can also use this for viewing video.
Setup
Wizard
You may choose to congure your network by using the Internet Connection Setup Wizard
that includes step-by-step instructions. Otherwise, you may manually congure your connection
using the Manual Internet Connection Setup.
21D-Link DCS-932L User Manual
Section 4 - Conguration
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to congure your new
D-Link Camera and connect the camera to the Internet.
Click Next to continue.
• DHCP Connection (by default), where your DHCP server will automatically
assign dynamic IP to your device.
• Static IP Address allows you to manually enter your network settings for
the camera.
• PPPoE connection, where your camera is directly connected to the Internet
through a DSL modem.
Note: Input the DNS information if you have chosen and assigned a Static IP
Address for your camera.
22D-Link DCS-932L User Manual
Section 4 - Conguration
Click Next to continue.
If you have a Dynamic DNS account and would like the camera to update your IP
address automatically, enable DDNS and enter your host information.
Click Next to continue.
Enter a name for your camera. Click Next to continue.
Congure the correct time to ensure that all events triggered, captured and
scheduled at the right time. Click Next to continue.
This page displays your congured settings. Click Apply to save and activate the
setting, or Back to change your settings.
23D-Link DCS-932L User Manual
Section 4 - Conguration
This section allows you to congure your network settings.
Network Setup
DHCP:
Static IP Client:
PPPoE Settings:
Select this connection if you have a DHCP server running on your
network and would like a dynamic IP address to be updated to your
camera automatically.
You may obtain a static or xed IP address and other network
information from your network administrator for your camera. A static
IP address will ease you for accessing your camera in the future.
IP Address: The xed IP address
Subnet Mask: The default value is “255.255.255.0.” Used to determine
if the destination is the same subnet.
Default Gateway: The gateway used to forward frames to destinations
in a dierent subnet. Invalid gateway settings may cause the failure of
transmissions to a dierent subnet.
Primary DNS: Primary domain name server that translates names to
IP addresses.
Secondary DNS: Secondary domain name server to backup the
Primary DNS.
If you are using a PPPoE connection, enable it and enter the User Name and Password for your PPPoE account. You can get this information
from your Internet service provider (ISP).
Port Settings:
UPnP Settings:
You may congure a Second HTTP port that will allow you to connect to the camera via a standard web browser. The port can be set to a
number other than the default TCP ports 80. A corresponding port must be opened on the router. For example, if the port is changed to
1010, users must type http://192.168.0.100:1010 instead of only “http://192.168.0.100”.
Enable this setting to congure your camera as an UPnP device in the network.
24D-Link DCS-932L User Manual
Section 4 - Conguration
Wireless
This section allows you to setup and congure the wireless settings on your camera.
SSID:
Channel:
Connection Mode:
Site Survey:
Wireless Security
Mode:
WEP:
Service Set Identier, an identier for your wireless network.
The default setting is channel 6. Select the same channel that is being
used by other wireless devices within your network. When there is an
interference from the wireless networks that overlap with one another,
you may change the channel to obtain maximum performance for your
connection.
Infrastructure is a wireless connection using an access point as a
transmission point of all wireless devices. Ad-Hoc is a wireless connection
used without an access point, where your DCS-932L is directly
connecting to your PC. This is done using the on-board wireless
adapter on the DCS-932L connected to a wireless adapter on the PC.
This page will allow you to select a wireless network that the DCS-932L
was able to detect.
For security, there are three choices; None, WEP, and WPA-PSK / WPA2-
PSK. Select the same encryption method that is being used by your wireless device/ router.
WEP provides security by encrypting data over your wireless network so that it is protected as it is transmitted from one wireless device to
another. To gain access to a WEP network, you must know the key. The key is a string of characters that you create. When using WEP, you
must determine the level of encryption. The type of encryption determines the key length. 128-bit encryption requires a longer key than
64-bit encryption.
WPA-PSK / WPA2PSK
Settings:
An appropriate Preshared Key, which is needed in order to connect to the wireless network.
25D-Link DCS-932L User Manual
Section 4 - Conguration
DDNS
This section allows you to congure the DDNS setting for your camera. DDNS will allow all users to access your camera using a domain name instead
of an IP address.
DDNS:
Enable:
Server Address:
Host Name:
User Name:
Password:
(Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem when it has been
modied. The username and password are required when using the DDNS service.
Click to enable the DDNS function.
Select your Dynamic DNS Server from the pull down menu.
Enter the host name of the DDNS server.
Enter your username or e-mail used to connect to the DDNS.
Enter your password used to connect to the DDNS server.
26D-Link DCS-932L User Manual
Section 4 - Conguration
Image Setup
This section allows you to congure the image settings for your camera.
Enable Antiicker:
Flip Image:
Mirror:
Brightness Control:
Contrast Control:
Saturation Control:
Select this box to enable antiicker.
Select this box to vertically ip the video. If the camera is installed upside down, Flip Image and Mirror should both be checked.
Horizontally ip the video.
Allows you to adjust the brightness level.
Allows you to adjust the contrast level.
Allows you to adjust the saturation level.
27D-Link DCS-932L User Manual
Section 4 - Conguration
Video
This section allows you to congure the video settings for your camera.
Video Conguration
Video Prole:
Encode Type:
Resolution:
FPS:
JPEG Quality:
View Mode:
Light Frequency:
This section allows you to change the Encode Type, Resolution, FPS, and Quality.
The compression format used when viewing your camera.
Select the desired video resolution from three formats: 640x480, 320x240, and 160x120. The higher setting can obtain better quality.
However, it will use more resource within your network.
Select the optimal setting depending on your network status. Please note that the higher setting can obtain better quality. However, it will
use more resources within your network.
Select one of ve levels of image quality: Highest, High, Medium, Low, and Lowest.
Select the mode for viewing the camera image. Select Image for a still images, ActiveX for Internet Explorer, or Java for other web browsers.
Select the proper frequency (50Hz or 60Hz) to reduce image icker.
28D-Link DCS-932L User Manual
Section 4 - Conguration
Audio
Enabling audio setting will allow you to listen to audio from the camera
through your PC’s audio output.
Note: Please wait a few seconds for the camera to adjust the audio after the
setting has been selected.
Audio Settings:
Volume Settings:
You may Enable or Disable the camera audio feed.
Select the desired volume percentage level.
29D-Link DCS-932L User Manual
Section 4 - Conguration
Motion Detect
Enabling Video Motion will allow your camera to use the motion detection
feature. You may draw a nite motion area that will be used for monitoring.
Motion
Detection:
Sensitivity:
Detection Areas:
Select this box to enable the motion detection feature of your
camera.
Species the measurable dierence between two sequential
images that would indicate motion. Please enter a value between
0 and 100.
Use your mouse to click on the blocks that you would like to
monitor for motion.
30D-Link DCS-932L User Manual
Section 4 - Conguration
Mail
This section allows you to congure the email notication settings for your camera.
SMTP Server Address:
Sender e-mail Address:
Receiver e-mail Address:
User Name:
Password:
For example, if you want to use Gmail by SSL-TLS for the e-mail notication, you can follow the
setup procedure as below:
Step 1 - Enter “smtp.gmail.com” in SMTP Server Address.
Step 2 - Change the SMTP server port number from 25 to 465.
Step 3 - Enter your gmail E-mail address in Sender E-mail Address.
Step 4 - Enter the destination E-mail address in Receiver E-mail Address.
Step 5 - Enter the user name required to access the SMTP server.
Step 6 - Enter the password required to access the SMTP server.
Step 7 - Select SSL-TLS and then click Save Settings.
Step 8 - Click the Test button to send a test e-mail will be sent to the e-mail account listed above.
Note: You can also use STARTTLS which will use SMTP server port number 587.
This is the domain name or IP address of your external e-mail server.
This is the e-mail address of the person sending the camera snapshots.
This is the e-mail address of the recipient.
If the SMTP server uses authentication, you must enter your user
name here.
This is the password that corresponds to your user name to connect
to the SMTP server.
Note: If you want to use the Yahoo SMTP server, the SMTP server address will be dierent between each registered region. And it only supports the SMTP server
port number 465 for the SSL-TLS.
31D-Link DCS-932L User Manual
Section 4 - Conguration
Time Schedule
Enable e-mail image
to e-mail account:
Interval:
Test E-mail
Account:
Choosing Always will start sending snapshots to the recipient’s e-mail account right away. Choosing Schedule will allow you to schedule
when to start and stop the sending of snapshots to the recipient’s e-mail account.
Select Motion Detection if you would like the camera to send images to the recipient’s e-mail account when the motions are detected.
The frequency of the snapshot interval can also be congured from 1 to 65535 seconds.
This will send a snapshot to the e-mail account that you have congured in the E-mail section. If you have congured the SMTP account
correctly, you will be able to send a test le to the e-mail account of the recipient.
32D-Link DCS-932L User Manual
Section 4 - Conguration
FTP
This section allows you to congure a FTP server to receive images from the camera.
Host Address:
Port Number:
User Name:
Password:
Directory Path:
Passive Mode:
This is the IP address of the FTP server that you will be connecting to.
Default is port 21. If changed, external FTP client program must change the server
connection port accordingly.
Species the user name to access the external FTP server. If you are to upload
snapshots to an FTP server you will need to ll in the Domain name or IP address of
your external FTP server. The following user settings must be correctly congured
for remote access.
Species the password to access the external FTP server.
Species the destination folder in the external FTP server.
Enabling passive mode will allow access to an external FTP server if your camera is
behind a router protected by a rewall.
33D-Link DCS-932L User Manual
Loading...