How it Works
D-LINK
Loading...
ANT24-1500
User Manual
34 pgs14.56 Mb0

D-LINK ANT24-1500 User Manual

DWL-AG700AP Install Guide
Version 2.01 ANT24-Series ANT70-Series
D-Link Antenna Kits
User’s Guide
2
D-Link Antenna-kit Installation Guide
Installation
(If needed)
Install the surge protector. (You can install with optional ANT24 series low loss cables)
Note:
/antenna
3
System Requirements
Installation
D-Link Antenna-kit Installation Guide
ANT24-SP Surge protector
Installation guide
for outdoor antenna-kit
Step 1 loosen the screw from the surge protector.
Step 2 get a normal conductive copper wire with 2 sides stripped long enough to be conductive, these wires can lead high voltage surges into the grounding.
Remark: (1) for the ground screw you use, we suggest the longer (deeper into ground) the better performance it has. (2) please use a copper wire with diameter at least from 2.0mm, the thicker the diameter, the higher voltage it can sustain.
Option (1)
Option (2)
Ground
Step 3 find a conductive material nearby the antenna installation sites, connect another end of the wire into position, there are several options: (1) Use a long screw to stick into the ground tightly, connect another wire onto. (2) fix or solder another end of wire onto a steel material/ bar under steel construction, such as wall for buildings, railings or other conductive materials which set up from the ground.
4
ANT24-Series
Regulations
2.4GHz~2.5GHz 5.15GHz~5.35GHz5.47~5.725 5.75GHz~5.875GHz
point to multi-point
point to point
point to multi-point 36dBm 36dBm
point to point
30+6(antenna gain ) dBm then above 30dBm, one dB output power reduced, then 3dB antenna gain increased
30+23(antenna gain) then above 30dBm, one dB output power reduced, then 3dB antenna gain increased
For outdoor use
X
FCC
23dBm
ETSI
20dBm ave.
23dBm peak.
23dBm 30dBm
X
Based
EIRP limitaton:
EIRP = Effective,Isotropic Radiated Power = Device Output Power + Antenna Gain - Cable Loss
Model Cable Type Length Interface
Cable loss (dB)
@ 2.4GHz
Cable loss(dB)
@5GHz
ANT24-CB03N LMR400 3m N plug to N jack 1 1.75
ANT24-CB06N LMR400 6m N plug to N jack 1.85 2.7
ANT24-CB09N LMR400 9m N plug to N jack 2.6 3.8
ANT24-ODU03M LMR200 0.3m RP N plug to N plug 0.6 1.15
ANT24-ODU1M LMR400 1m RP N plug to N plug 0.6 1.15
ANT24-ODU3M LMR400 3m RP N plug to N plug 1 1.75
ANT24-DLK3M LMR200 3m RP SMA plug to N plug 2 3.45
Note:
1. The loss value includes two connectors ( around 0.3~0.4dB @ 2.4GHz, 0.39~0.52dB@5GHz).
2. The longer cable you use, the more attenuation it causes, therefore, the extended range might be shorten then a normal link with default cables.
3. To comply with EU regulation, please use longer cables which can cause enough attenuation value.
4. For more detail of connectors type, please refer to the appendix page.(P.34)
Cable Loss
5
System Requirements
ANT24-Series
D-Link ANT24-0401 Ceiling Mount Antenna
Electrical specication
Environmental & Mechanical Characteristics
Temperature -40 C to +80 C
Humidity 100% @ 25 C
Lightning protection DC ground
Radome color white
Radome material ABS
Weight 100gw
Dimensions 132 x 42 mm
120
120°
6
ANT24-Series
D-Link ANT24-0500
Indoor/Outdoor
Omni-Directional Antenna
Electrical specication
Environmental & Mechanical Characteristics
Survival wind speed 180 km/hr
Temperature -40 C to +80 C
Humidity 100% @ 25 C
Lightning protection DC ground
Radome color Gray-white
Radome material Fiberglass
Radiator material Micro striple line
Weight 0.8kgw
Dimensions 330 x 19 mm
90
o
180
o
150
o
120
o
60
o
30
o
0
o
-150
o
-90
o
-120
o
-60
o
-30
o
-3
-10
-20
-30
Version 1
H-plane Co-polarization Pattern
90
o
180
o
150
o
120
o
60
o
30
o
-150
o
-90
o
-120
o
-60
o
-30
o
-3
-10
-20
-30
V-plane Co-polarization Pattern
0
o
32
7
System Requirements
ANT24-Series
D-Link ANT24-0501 Indoor Omni-Directional Antenna
Electrical specication
Physical Properties
Package Contents
-One ANT24-0501 2.4GHz indoor 5dBi omni-
directional Antenna with 1.5M extension cable and RP-SMA Jack connector
-One RP-SMA/ RP-TNC adaptor
-One registration card and international ofce guide
-Mounting kit includes:
-Two Crews
-Two plastic xings
-One sticker
Frequency Range 2400~2500MHz
Impedance 50Ω Normal
VSWR 1.92 Max
Return Loss -10 dB Maximum
Antenna Structure Collinear antenna
Peak Gain ( w/o cable loss) 5dBi
Admitted Power 1 W
Cable loss( 1.5m) 2.1dB@2.45GHz
E-Plane 36 deg.
H-Plane 360 deg.
Cable RG-178 50Ω
Cable length 1.5 M
Cable color Gray
Connector Reverse SMA plug
Antenna Material ABS, ABS+PC
Operating Temp -20°C ~ +65°C
Storage Temp -30°C ~ +75°C
Color Antenna: Metallic gray and silver
Base: Metallic gray
0
345
330
315
300
285
270
255
240
225
210
195
180
165
150
135
120
105
90
75
60
45
30
15
-20 -10 0
dB
Far-field amplitude of D-link-7dBi-H1-1020.nsi
0
345
330
315
300
285
270
255
240
225
210
195
180
165
150
135
120
105
90
75
60
45
30
15
-20 -10 0
dB
Far-field amplitude of D-link-7dBi-v-1020.nsi
Far-field amplitude of D-link-5dBi-H-1020.nsi
Far-field amplitude of D-link-5dBi-v-1020.nsi
0
345
330
315
300
285
270
255
240
225
210
195
180
165
150
135
120
105
90
75
60
45
30
15
-20 -10 0
dB
Far-field amplitude of D-link-7dBi-v-1020.nsi
0
345
330
315
300
285
270
255
240
225
210
195
180
165
150
135
120
105
90
75
60
45
30
15
-20 -10 0
dB
Far-field amplitude of D-link-5dBi-v-1020.nsi
36°
ANT24-0700 / ANT24-0700C
0
345
330
315
300
285
270
255
240
225
210
195
180
165
150
135
120
105
90
75
60
45
30
15
-20 -10 0
dB
Far-field amplitude of D-link-7dBi-H1-1020.nsi
ANT24-0501C/ ANT24-0501
0
345
330
315
300
285
270
255
240
225
210
195
180
165
150
135
120
105
90
75
60
45
30
15
-20 -10 0
dB
Far-field amplitude of D-link-5dBi-H-1020.nsi
8
ANT24-Series
D-Link ANT24-0501C Indoor Omni-Directional Antenna
Electrical specication
Physical Properties
Package Contents
-One ANT24-0501C 2.4GHz 5dBi indoor omni-directional antenna with a RP-SMA plug connector
-One RP SMA/ RP TNC adapter
-One registration card and company contact guide
Frequency Range 2400~2500MHz
Impedance 50Ω Normal
VSWR 1.92 Max
Peak Gain 5dBi
Admitted Power 1 W
E-Plane 36 deg.
H-Plane 360 deg.
Connector Reverse SMA plug
Antenna Material ABS, ABS+PC
Operating Temp -20°C ~ +65°C
Storage Temp -30°C ~ +75°C
Color Antenna: Metallic gray and silver
Attach to AP/Router
36°
9
System Requirements
ANT24-Series
D-Link DWL-50AT Indoor Omni-Directional Antenna
5.0dBi Typical
2.0:1 Max.
nominal
197 mm(length)
29.5gw
Electrical specication
0
345
330
315
300
285
270
255
240
225
210
195
180
165
150
135
120
105
90
75
60
45
30
15
-20 -10 0
dB
Far-field amplitude of C147-510017-A-V.nsi
2.4GHz 2.45GHz 2.5GHz
0
345
330
315
300
285
270
255
240
225
210
195
180
165
150
135
120
105
90
75
60
45
30
15
-20 -10 0
dB
Far-field amplitude of C147-510017-A-V.nsi
2.4GHz 2.45GHz 2.5GHz
0
345
330
315
300
285
270
255
240
225
210
195
180
165
150
135
120
105
90
75
60
45
30
15
-20 -10 0
dB
Far-field amplitude of C147-510017-A-H.nsi
2.4GHz 2.45GHz 2.5GHz
30°
30 degree
360°
10
ANT24-Series
D-Link DWL-R60AT Indoor Directional Antenna
2.0:1 Max.
6.0dBi Typical
nominal
75gw
80x85x12.8 mm
Electrical specication
70
85
85°
11
System Requirements
ANT24-Series
D-Link ANT24-0600 Indoor Directional Antenna
Electrical specication
Physical Properties
Package Contents
-One ANT24-0600 2.4GHz indoor 6dBi directional Antenna with 1.5 Filotex cable and RP-SMA Jack connector
-One RP-SMA/ RP-TNC adaptor
-One User’s QIG
-Two Crews
-Two plastic xings
-One sticker
Frequency Range 2400~2500MHz
Impedance 50Ω Normal
VSWR 1.92 Max
Return Loss -10 dB Maximum
Antenna Structure 1/ 2 λ Diople array reector
Peak Gain ( w/o cable loss) 6.0 dBi @ 2.45GHz ( typical)
Admitted Power 1 W
Cable loss( 1.5m) 2.1dB@2.45GHz
E-Plane 68°
H-Plane 80°
Cable Filotex 50Ω
Antenna Cover ABS
Antenna Base PC
Operating Temp -20°C ~ +65°C
Storage Temp -30°C ~ +75°C
Color White
Desktop
Magnetic Attach
Wall Mounting
Loading...
+ 23 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use