D-Link ANT24-0400, ANT24-0401, ANT24-0500, ANT24-0800, ANT24-0801 Quick Installation Manual

ANT24 Series

These products can be compliant with D-Link Air, Air Plus
products to make your wireless LAN have better linking quaulity.

D-Link Fast Antenna Kits

CAUTION!!
Please always put the surge protector
indoors and near the device
side, if you cannot keep it indoors,
use the tapes to wrap all the connectors
as pictures showed below.

Option: Ultra low-loss cable HDF-400
Length options: 3M/6M/9M

Option: Surge protector
Connectors: N-plug to N-jack

ANT24-SP Surge protector
Installation guide
for outdoor antenna-kit

Step 1
loosen the screw from the surge protector.

Step 2
get a normal conductive copper wire with 2 sides stripped long enough to be conductive,
these wires can lead high voltage surges into the grounding.

Remark:
(1) for the ground screw you use, we suggest the longer (deeper into ground) the better performance it has.
(2) please use a copper wire with diameter at least from 2.0mm, the thicker the diameter, the higher
voltage it can sustain.

Option (1)

Option (2)

Ground

Step 3
find a conductive material nearby the antenna installation sites, connect another end of the wire
into position, there are several options:
(1) Use a long screw to stick into the ground tightly, connect another wire onto.
(2) fix or solder another end of wire onto a steel material/ bar under steel construction,
such as wall for buildings, railings or other conductive materials which set up from
the ground.

Optional ultra low attenuation cable for
ANT24-Outdoor high gain series

ANT24-0800

ANT24-120

1

Default extension cables

ANT24-1800

ANT24-1400

ANT24-0801

We have the following
length options to create

flexible antenna deployment:

P/N: ANT24-CB03N: 3meter @ 0.78dB attenuation
P/N: ANT24-CB06N: 6meter @ 1.56dB attenuation
P/N: ANT24-CB09N: 9meter @ 2.34dB attenuation

NOTE:
The longer cable you use, the more
attenuation it causes, therefoe,
the extended range might be shorten than a normal link with
default extension cables.

Using ANT24-JC jumper cable to switch to smaller connector
which can be compliant with DWL-660 WLAN card.

ANT24-JC jumper cable

Silver to Antenna

Golden to Device

To have correct connection of the attached
extension cable (Based on connector color management)