
WIRELESS AC750 4G LTE MULTI-WAN
ROUTER
DWR-953
QUICK
INSTALLATION
GUIDE
INSTALLATIONSANLEITUNG
GUIDE D’INSTALLATION
GUÍA DE INSTALACIÓN
GUIDA DI INSTALLAZIONE
INSTALLATIEHANDLEIDING
INSTRUKCJA INSTALACJI
INSTALAČNÍ PŘÍRUČKA
TELEPÍTÉSI SEGÉDLET
INSTALLASJONSVEILEDNING
INSTALLATIONSVEJLEDNING
ASENNUSOPAS
INSTALLATIONSGUIDE
GUIA DE INSTALAÇÃO
ΟΔΗΓΟΣ ΓΡΗΓΟΡΗΣ ΕΓΚΑΤΑΣΤΑΣΗΣ
VODIČ ZA BRZU INSTALACIJU
KRATKA NAVODILA ZA UPORABO
GHID DE INSTALARE RAPIDĂ

CONTENTS OF PACKAGING
ENGLISH
WIRELESS AC750 4G LTE MULTI-WAN ROUTER
DWR-953
12 V 1.5 A POWER ADAPTER
CAT5 ETHERNET CABLE
If any of these items are missing from your packaging, contact your
reseller.
SYSTEM REQUIREMENTS
• A broadband Internet connection
• Computer with:
• Microsoft Windows
• PC with 1.3 GHz or above and at least 128 MB RAM
• Internet Explorer 7, Firefox 12, Safari 4, or Chrome 20 or higher version with Java installed and
enabled
2
®
8/7/Vista/XP, or Mac with OS X 10.6 or higher
DWR-95 3

PRODUCT SETUP
Ensure that your DWR-953 Wireless AC750 4G LTE Multi-WAN Router is powered off before
performing the steps below.
Step 1:
Insert a standard USIM card into the SIM card slot on the back of the
router with the gold contacts facing downward.
Router
SIM card
Note: Do not attempt to insert a Nano SIM or Micro SIM into the SIM
card slot.
ENGLISH
Router
Router
Router
WELCOME TO THE D-LINK SETUP WIZARD
DWR-95 3
Modem
Step 2:
If you are connecting this router to a modem, insert one end of
an Ethernet cable into the GE WAN port on the back of the router
and the other end into your wired Internet connection device.
Note: When connected to a modem, by default, the 4G connection
will be used as a backup. The router will automatically use the 4G
Internet connection if the wired connection is not available.
PC
Modem
Step 3:
Insert the supplied Ethernet cable into a LAN port on the back panel
of the DWR-953, and an available Ethernet port on the network
adapter in the computer you will use to congure the unit.
PC
Modem
Step 4:
Connect the power adapter to the power input on the back panel of
your DWR-953 Wireless AC750 4G LTE Multi-WAN Router, and plug
the other end of the power adapter into a wall outlet or power strip.
The Status LED on the router will light up to indicate that power has
been supplied to the router.
Step 5:
To congure the DWR-953
Wireless AC750 4G LTE Multi-WAN Router:
Open a web browser window and enter 192.168.0.1 into the address
bar.
Enter admin for the username and leave the password area blank.
The home conguration page will appear. Click Internet, located in
the conguration panel, followed by Wizard to congure the DWR-953.
3

TROUBLESHOOTING
SETUP AND CONFIGURATION PROBLEMS
1. HOW DO I CONFIGURE MY DWR-953 ROUTER OR CHECK MY WIRELESS NETWORK NAME (SSID)
ENGLISH
AND WIRELESS ENCRYPTION KEY?
• Connect your PC to the router using an Ethernet cable.
• Open a web browser and enter the router's IP address: http://192.168.0.1
• Log into the router using the default username admin; leave the password area blank.
• Once logged in, you can use the wizard located under Internet settings to congure the router,
or make changes manually.
Note: If you have changed the password and cannot remember it, you will need to reset the
router to factory defaults.
2. HOW DO I RESET MY DWR-953 ROUTER TO FACTORY DEFAULT SETTINGS?
• If you cannot remember your router administrator password, you may use a paperclip to press
and hold the reset button on the front of the router for about 10 seconds.
Note: Resetting the router to factory default will erase the current conguration. To recongure
your router, log in as outlined in question 1, then run the Setup Wizard.
3. HOW DO I ADD A NEW WIRELESS DEVICE OR PC IF I HAVE FORGOTTEN MY WIRELESS
NETWORK NAME (SSID) OR WIRELESS ENCRYPTION KEY?
• Every device that needs to connect to the router wirelessly will need use the correct Wireless
Network Name (SSID) and encryption key.
• Use the web-based user interface (as described in question 1 above) to check or choose your
wireless settings.
• Make sure you write down these settings so that you can enter them into each wirelessly-
connected PC. You will nd a dedicated area on the back of this document to note this important
information down for future use.
4. WHY AM I UNABLE TO ESTABLISH AN INTERNET CONNECTION?
• If connecting using a 4G mobile connection, make sure that you are within range of the mobile
service provider, and that the service has been correctly congured.
• If connecting using the WAN via ADSL/Cable service, make sure the modem has been enabled/
connected and is operational, and that the service is correctly congured.
TECHNICAL SUPPORT
4
dlink.com/support
DWR-95 3

Ver. 1.00(EU)_130x183 2015/12/21