DKN Airun 1 User Manual

1

2

DKN Run

DKN

GETTING STARTED

 Activate Bluetooth connection on iPad or tablet.
 Pair DKN Run.
 Activate DKN Run App on your tablet.
 Press CONNECT, select DKN Run (password 0000).

 Press SET USER DATA.

 Create or Select User profile.

 Landing page: select work-out.

AFTER WORK-OUT:

Press Home to LANDING PAGE.
Press BACK (3x), press EXIT.

Press Home to LANDING PAGE.
Press BACK (3x), exit APP on the tablet.
Deactivate Bluetooth Connection on iPad to clear Treadmill

Console.

DKN Run supports:

iPad
iPad 2
iPad mini

ANDROID 3.1 and higher, 1280 x 800 DPI, minimal 10”

“Made for iPod,” “Made for iPhone,” and “Made for iPad” means
that an Electronic accessory has been designed to connect
specifically to iPod, iPhone, or iPad, respectively, and has been
certified by the developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.

Please note that the use of this accessory with iPod, iPhone, or
iPad may affect wireless performance.

iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod
touch are trademarks of Apple Inc., registered in the U.S.
and other countries.

3

Before you start training on your DKN platform, please read the instructions carefully.

Be sure to keep the instructions for information, in case of repair and for spare part delivery.



This exerciser has been tested up to a max. body weight of 120 kg/260 lbs.



Follow carefully the different steps of the assembly instructions.



Use only original parts as delivered.



Before starting the assembly, be sure to check if delivery is complete by using the included parts-list.



For assembly use only suitable tools and ask for assistance with assembly if necessary.



Place the exerciser on an even, non-slippery surface. Because of possible corrosion, the usage of any exerciser in moist areas is not recommended.



Check before the first training and every 1-2 months that all connecting elements are tight fitting and are in the correct condition.



Replace defective components immediately and/or keep the equipment out of use until repair.



For repairs, use only original spare parts.



In case of repair please ask your dealer for advice



Avoid the use of aggressive detergents when cleaning.



Ensure that training starts only after correct assembly and inspection.



For all adjustable parts be aware of the maximum positions to which they can be adjusted/tightened to.



This exerciser is designed for adults. Please ensure that children use the exerciser only under the supervision of an adult.



Ensure that those present are aware of possible hazards, e. g. movable parts during training.



Warning: incorrect/excessive training can cause health injuries.



Please follow the advice for correct training as detailed in training instructions.

Consult your physician before starting with any exercise programme. He can advise on the kind of training and which impact is suitable.



The owner’s manual is only for customers’ reference.



The supplier can not guarantee for mistakes occurring due to translation or change in technical specification of the product.

All data displayed are approximate guidance and cannot be used in any medical application.

10

∮

Unfold

1 4L/R 8 11

12 20 30 61

85

Nr

4L/R

Description Specification QTY

Main frame

1

Upright 2

Computer 1

8

Allen wrench S5 1

11

1

Screw driver 1

12

Safety key 1

20

Allen wrench S6 1

30

Hex bolt M10*15 12

61
85

Inner washer

10.4*∮16.5*t1.0 12

18

19

20

21

Fold <> Unfold

22

Posicion cinta - Belt adjustment

Afstellen van het looptapijt

! Importante : El aparato debe ser en un superficie plano. Si el aparato no esta estable , la cinta se ira mas hacia la parte mas inferior del aparato.

1.Los tuercos de la cinta se encuentran al parte trasera del aparato como indicado.

2.Si la cinta se ira demasiado a la derecha :
Ponga el aparato en marcha y instityuelo en 4km/h. Vuelva con ayuda de una llave inglesa el tornillo derecho un cuarto hacia derecho. Vuelva el tornillo
siempre un cuarto al derecho hasta que la cinta se encuentra de nuevo al medio.
Trate el aparato y mantenga los movimientos de la cinta para asegurarse que no ha instituido la cinta demasiado lejos

3.Si la cinta se ira demasiado a laizquierda:
Ponga el aparato en marcha y instityuelo en 4km/h. Vuelva con ayuda de una llave inglesa el tornillo derecho un cuarto hacia derecho. Vuelva el tornillo
siempre un cuarto al derecho hasta que la cinta se encuentra de nuevo al medio.
Trate el aparato y mantenga los movimientos de la cinta para asegurarse que no ha instituido la cinta demasiado lejos

-

Ustar o tapete - Regulierung des Rollteppichs - Натяжение полотна

-

Ajustement de la bande de course

23