Page 1
Charging Hub for Phantom 3
Intelligent Flight Batteries
User Manual
V1.0 2015.8
Page 2
Disclaimer
Thank you for purchasing the Phantom 3 Charging Hub (hereinafter referred to as
“product”). Read this disclaimer carefully before using this product. By using this
product, you hereby agree to this disclaimer and signify that you have read it fully.
Please use this product in strict accordance with the manual and be sure to pay
attention to the Warnings. SZ DJI Technology Co., Ltd. and its afliated companies
assume no liability for damage(s) or injuries incurred directly or indirectly
from improper use of this product. Misuse includes, but is not limited to, using
unapproved chargers, charging unapproved batteries, short-circuiting, overheating,
introducing foreign materials into the product, or touching the terminals with skin or
metal. Refer to the
Guidelines,
This device complies with part 15 of the FCC Rules.
DJI is the registered trademark of SZ DJI Technology Co., Ltd. (abbreviated as
“DJI”). Names of product, brand, etc., appearing in this manual are trademarks
or registered trademarks of their respective owner companies. This product and
manual are copyrighted by DJI with all rights reserved. No part of this product
or manual shall be reproduced in any form without the prior written consent or
authorization of DJI.
This disclaimer is produced in various languages. In the event of divergence
among different versions, the Chinese version shall prevail when the product in
question is purchased in Mainland China, and English version shall prevail when
the product in question is purchased in any other region.
Safety Guidelines and Disclaimer, Intelligent Flight Battery Safety
and
User Manual
for applicable information not herein contained.
Warnings
1. The Charging Hub is only compatible with the Phantom 3 Battery Charger.
Do not attempt to use the Charging Hub with any other battery charger.
2. The Charging Hub is only compatible with PH3-4480mAh-15.2V Intelligent Flight
Batteries. Do not attempt to use the Charging Hub with other battery models.
3. Place the Charging Hub on a at and stable surface when in use. Ensure the
device is properly insulated to prevent re hazards.
4. Do not attempt to touch or expose the metal terminals on the Charging Hub.
5. Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup.
Product Prole
The Charging Hub is a product designed for use with the Phantom 3 Intelligent
Flight Battery. When used with the Phantom 3 Battery Charger, it can charge up
to four Intelligent Flight Batteries. The Intelligent Flight Batteries will be charged in
sequence according to their power levels, from high to low. The Micro-USB port
allows users to update the rmware.
© 2015 DJI. All Rights Reserved.
1
Page 3
Charging Hub Diagram
[9]
[8]
[7]
[6]
[5]
[1]
[2]
[3]
[4]
[10]
[1] Status LED 1
[2] Charging Port 1
[3] Charging Port 2
[4] Status LED 2
[5] Power Port
[6] Status LED 3
[7] Charging Port 3
[8] Charging Port 4
[9] Status LED 4
[10] Firmware Update Port
(Micro-USB Slot)
Using the Charging Hub
Following the instructions below to use the Charging Hub:
1. Connecting to a Power Source
Connect the standard Phantom 3 Battery Charger to a power outlet (100-240V
50/60Hz), then connect the Charging Hub to the Phantom 3 Battery Charger.
Charging Hub
Charger
2. Connecting Batteries
Insert the Intelligent Flight Battery into the charging port to begin charging.
The Intelligent Flight Battery with the highest power level will be fully charged rst.
Other batteries will be charged in the same manner, according to their power
© 2015 DJI. All Rights Reserved.
Power Outlet
2
Page 4
levels. Refer to the “Status LED Indicator Description” section of this manual
for more information about the Status LED indicator's blinking patterns. Unplug
the batteries when they are fully charged.
When charging more than one Intelligent Flight Battery, distribute
them as evenly as possible among the charging slots.
Do NOT touch the metal terminals. Do NOT leave the metal terminals
exposed to open air when they are not in use.
Status LED Indicator Description
Status LED Indicator Description
Flashes Green Charging
— Solid Green Fully charged
Flashes Red
—
Solid Red No battery connected to this port
— Solid Yellow The battery is not charging
Abnormal power supply, please check the
connection to the Battery Charger
Updating the Firmware
1. Download the latest rmware update program from the ofcial DJI website.
(http://www.dji.com/product/phantom-3/download)
© 2015 DJI. All Rights Reserved.
3
Page 5
2. Turn on the Charging Hub, then connect it to a computer using a Micro-USB cable.
3. Run the rmware update program. Press the update button and wait for the
process to nish.
4. The Charging Hub will automatically restart when the update has been
successfully completed.
5. Repeat this process if the rmware update fails for any reason.
Specications
Model PHANTOM 3 CHARGING HUB
Compatible Battery Chargers
Compatible Battery Model PH3-4480mAh-15.2V Intelligent Flight Battery
Operating Temperature 32 °F to 104 °F (0 °C to 40 °C)
Operating Voltage 17.5 V
Weight 274 g
The content is subject to change.
Download the latest version from
http://www.dji.com/product/phantom-3
If you have any questions about this document, please contact
DJI by sending a message to
© 2015 DJI. All Rights Reserved.
Phantom 3 Professional Charger (ADE019)
Phantom 3 Advanced Charger (A14-057N1A)
Phantom 3 Standard Charger (A14-057N1A)
DocSupport@dji.com
.
Loading...