Dji Osmo Z-Axis User Guide 1.0

OSMO Z-Axis

Quick Start Guide

2016.04

V1.0

Disclaimer and Warning

Congratulations on purchasing your new DJITM product. The information in

this document affects your safety and your legal rights and responsibilities.

Read this entire document carefully to ensure proper conguration before

use. Failure to read and follow instructions and warnings in this document

may result in serious injury to yourself or others, damage to your DJI

product, or damage to other objects in the vicinity. This document and all

other collateral documents are subject to change at the sole discretion of

DJI. For up-to-date product information, visit http://www.dji.com and click on

the product page for this product.

By using this product, you hereby signify that you have read this disclaimer

and warning carefully and that you understand and agree to abide by the

terms and conditions herein. You agree that you are solely responsible

for your own conduct while using this product, and for any consequences

thereof. You agree to use this product only for purposes that are proper and

in accordance with all applicable laws, rules, and regulations, and all terms,

precautions, practices, policies and guidelines DJI has made and may

make available.

DJI accepts no liability for damage, injury or any legal responsibility

incurred directly or indirectly from the use of this product. The user shall

observe safe and lawful practices including, but not limited to, those set

forth in this document.

1

Introduction

The OsmoTM Z-Axis can signicantly reduce vertical shaking from natural

arm movements when walking or jogging. It is compatible with the

ZenmuseTM X3 gimbal and camera.

[1]

[2]

[3]

[4]

[5]

[1] Gimbal Securing Ring

[2] Arm

[3] Pivot Release Button

[7]

[4] DJI Rosette Mount

[5] Securing Knob

[6] Handle Connector

[7] Tension Adjustment Knob

[6]

The Z-Axis is NOT intended for action sports that involve extreme

movement or to be used with other non-DJI devices.

Specications

Weight: 282 g

Dimensions: 212 mm x 67 mm x 127 mm

2

Installation

1. Rotate the Osmo handle’s gimbal securing ring to its unlocked position.

2. Insert the Z-Axis’s handle connector into the gimbal securing ring.

3. Lock the gimbal securing ring.

4. Screw the Z-Axis’s securing knob to the Rosette Mount on the side of the

Osmo handle. Ensure that it is mounted securely.

3

5. Rotate the Z-Axis’s gimbal securing ring to its unlocked position and

attach the Zenmuse X3.

6. Lock the gimbal securing ring. Ensure that the Zenmuse X3 is mounted

securely.

Adjusting the Balance

The balance of the Z-Axis should be adjusted to ensure that the arm can

move up and down freely without bumping against the endpoints.

4

Place the Osmo on a at and stable surface so that it is perfectly upright.

Adjust the height of the arm by turning the tension adjustment knob. The

arm should be elevated slightly above the horizontal plane as shown.

Horizontal Line

Avoid icking your wrist when lming. Move your arm steadily while

keeping the gimbal upright.

Keep ngers, hair and small objects away from the arm during use

so they do not get caught in the articulating mechanism.

5

Adjusting the Grip Angle

While holding down the pivot release button on the Z-Axis, rotate the Osmo

handle vertically to the desired position, and then release the button to lock

that position.

DO NOT attempt to adjust the grip angle without pressing the pivot

release button as this will damage the Z-Axis.

6

DJI Support:
www.dji.com/support

The content in this document is subject to change.

Download the latest version from

www.dji.com/product/osmo

If you have any questions about this document, please contact DJI
by sending a message to [e-mail].

2016 DJI. All Rights Reserved.

©