Dji Osmo Mobile Device Holder Quick Start Guide 1.0

OSMO

Mobile Device Holder

Quick Start Guide

V1.0

Disclaimer and Warning

Congratulations on purchasing your new DJI product. The
information in this document affects your safety and your legal
rights and responsibilities. Read this entire document carefully
to ensure proper configuration before use. Failure to read
and follow instructions and warnings in this document may
result in serious injury to yourself or others, damage to your
DJI product, or damage to other objects in the vicinity. This
document and all other collateral documents are subject to
change at the sole discretion of DJI. For up-to-date product
informa tion, v isit http://www.dji.com and click on the product
page for this product.

By using this product, you hereby signify that you have read this
disclaimer and warning carefully and that you understand and
agree to abide by the terms and conditions herein. You agree
that you are solely responsible for your own conduct while using
this product, and for any consequences thereof. You agree
to use this product only for purposes that are proper and in
accordance with all applicable laws, rules, and regulations, and
all terms, precautions, practices, policies and guidelines DJI has
made and may make available.

DJI accepts no liability for damage, injury or any legal
responsibility incurred directly or indirectly from the use of
this product. The user shall observe safe and lawful practices
including, but not limited to, those set forth in this document.

Introduction

The Mobile Device Holder for the Osmo secures your smartphone
alongside the handle. Your smartphone can then serve as a

real-time viewnder with touchscreen camera control through

the DJI GO app.

Specications

Dimensions: 116 mm × 30 mm × 34 mm
Weight: 118 g
Max Clamping Dimensions: 160 mm × 77 mm

Installation

1. Attach the Mobile Device Holder to the rosette mount on the
Osmo handle. Tighten the knob to secure.

2. Unfold the arms and adjust the pads.

3. Place one end of your mobile device into the arms. Push the
other end, extending the arms until your entire mobile device
is seated in the Mobile Device Holder.

4. Release your mobile device. Ensure it is secure. Adjust the
pads if necessary.

5. Rotate your mobile device to the desired position.

WARNING

1. Ensure the Mobile Device Holder and your mobile device are
mounted securely to prevent damage to your property.

2. DO NOT force an oversized mobile device into the Mobile
Device Holder.

The content is subject to change.

Download the latest version from

www.dji.com/product/osmo

If you have any questions about this document, please contact
DJI by sending a message to [e-mail].

2015 DJI. All Rights Reserved.

©