Dji Osmo Mobile User Manual
OSMO MOBILE
User Manual
2017.03
V1.2
Searching for Keywords
Search for keywords such as “battery” and “install” to nd a topic. If you are using Adobe
Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on
Mac to begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that
section.
Printing this Document
This document supports high resolution printing.
Using this Manual
Legend
Important Tips
Install the DJI GO App
Search for ‘DJI GO’ on the App Store or Google Play and install
the app on your mobile device.
DJI GO supports iOS 8.0 (or later) or Android 4.4 (or later).
2017 DJI All Rights Reserved.
2
©
Contents
Using this Manual
Legend
Install the DJI GO App
Introduction
GettingStarted
Intelligent Battery
Mount and Balance the Mobile Phone
Optional Accessories
UsingtheOsmoMobile
Controls and Operations
Operation Modes
DJIGOApp
Download
Connecting to the DJI GO App
Key Pages
UpgradingtheFirmware
How to Upgrade
2
2
2
4
5
5
7
8
9
9
12
14
14
14
15
18
18
UsingtheZenmuseM1gimbalwithOsmoHandle
Install the Zenmuse M1
Notes
Specifications
2017 DJI All Rights Reserved.
©
18
18
19
20
3
Introduction
The OSMOTM Mobile is an advanced 3-axis gimbal that stabilizes and controls your
smartphone, turning it into a smart motion camera. Its light and ergonomic design places
physical controls at your ngertips, to form a powerful go anywhere smartphone lmmaking
device. The DJI GO app brings ActiveTrack and Motion Timelapse features to the Osmo
Mobile.
Equipped with 3-axis stabilization and SmoothTrack technology, the Osmo Mobile
compensates for natural arm movements and smooths out transitions, creating seamlessly
smooth video. Finer operations can be done with the joystick, and the phone can be instantly
positioned by hand. The DJI Rosette Mount on the side of the handle supports a number
of accessories, including an Extension Rod, a Tripod, and various mounts for specialized
lmmaking applications.
At a Glance:
[13]
[1]
[2]
[3]
[4]
[5]
[12]
[11]
[10]
[9]
[8]
[7]
[6]
[15]
[16]
[14]
[17]
[1] Mobile Phone Holder
[2] Pan Motor
[3] Camera Status LED
[4] Joystick
[5] Shutter Button
[6] Record Button
[7] Power Switch
[8] System Status LED
[9] Tilt Motor
[10] Adjustable Arm
2017 DJI All Rights Reserved.
4
©
[18]
[19]
[11] Mobile Phone Detection Sensor
[12] Balance Adjustment Knob
[13] Roll Motor
[14] Holder Lock Knob
[15] Charging/Upgrade Port
[16] Trigger
[17] DJI Rosette Mount
[18] Lanyard Hole
[19] Battery Cover
Getting Started
Intelligent Battery
The 980 mAh Intelligent Battery can power the Osmo Mobile for about 4.5 hours.
Intelligent Battery Functions
Battery Balancing Balances the voltage of each cell during charging.
Overcurrent Protection Stops charging if the charging current is too large.
Overcharge Protection Stops charging if its voltage is too high.
Over-discharge Protection Stops discharging if its voltage is too low.
Short Circuit Protection Cuts the power supply if a short circuit is detected.
Temperature Control
Battery Level Display The battery level is displayed in the DJI GO app.
Battery Specications
Model HB01-522365
Type LiPo
Capacity 980 mAh
Energy 10.8 Wh
Voltage 11.1 V
Charging Temperature 41° to 104° F (5° to 40° C)
Operating Temperature 32° to 104° F (0° to 40° C)
Stops charging if the core temperature falls below 41°F (5°C)
or exceeds 104°F (40°C).
Be sure to fully charge the Intelligent Battery for the rst time to activate it.
Read the user manual, Intelligent Battery Safety Guidelines before use. The user
takes full responsibility for all operations and usage.
2017 DJI All Rights Reserved.
©
5
Osmo Mobile User Manual
Inserting the Battery
Slide the locking switch at the base of the Osmo Mobile to open the battery cover. Insert the
battery and lock the battery cover.
Charging
To charge the Osmo Mobile, connect the USB adapter (not included) to the charging port
using the provided power cable.
The battery is fully charged when the system status LED become solid green.
USB Adapter Charging Time : 3 hours (when charging at 1 A)
Maximum Supported USB Charging Current: 2.1 A
System Status LED
Only use the Power Cable with the Osmo Mobile. Damage may occur if the Power
Cable is attached to any other device's 3.5 mm port.
Removing the Battery
Slide the locking switch at the base of the Osmo Mobile to open the battery cover. Push the
red safety hook away from the battery to let it pop up, and then remove the battery.
2017 DJI All Rights Reserved.
6
©
Osmo Mobile User Manual
Mount and Balance the Mobile Phone
1. With the Osmo Mobile powered off, loosen the Holder Lock Knob, place the mobile phone
in the mobile phone holder and tighten the knob to secure its position.
2. The system is balanced if the mobile phone remains level when released, balanced only
by the gimbal.
Left Right
1
1
2
If the roll axis tilts to the left, pull
out the arm until the roll axis
remains level.
Do not power on the Osmo Mobile without a mobile phone. The Osmo Mobile will
not work if no device is detected by the Mobile Phone Detection Sensor.
It is important to balance the mobile phone in order to achieve optimal performance.
The Osmo Mobile should only be balanced when powered off.
If the roll axis tilts to the right, adjust
the mobile phone to the left until the
roll axis levels out.
2017 DJI All Rights Reserved.
©
2
7
Loading...