Dji DT7 User Manual
DT7&DR16 2.4G RC System User Manual V1.00
DT7 Remote Controller
DR16 Receiver
[1]
[2]
[4]
[3]
[8]
[9]
J2
J1
J3
J4
[6]
[7]
[5]
[10]
[12]
[11]
Congratulations on purchasing your new DJI product. Please read this manual carefully to ensure you can get the
most out of it.
In the box
DT7 Remote Controller, DR16 Receiver, 3-Pin cable.
Required Items
4 AA batteries, Micro-USB cable, flight control system, multi-rotor etc.
DT7 Remote Controller
The DT7 remote controller is a wireless communication device using the 2.4GHz frequency band. It is only
compatible with the DR16 receiver.
[1] Antenna [2] Carrying Handle [3] 3-Position Switch S1 [4] 3-Position Switch S2 [5] Stick1 （J1;J2）
[6] Stick2（J3;J4） [7] Neck Strap Attachment [8] Power Switch [9] Power LED Indicator
[10] Slide Lever [11] Micro-USB Port [12] Battery Compartment
©2013 DJI Innovations. All Rights Reserved.
- 1 -
DR16 Receiver
[1]
[2]
[3]
[7]
[6]
[5]
[4]
[1]
Antenna
[2]
LED Indicator
[3]
Link Button
[4]
GND
[5]
VCC
[6]
DBUS
[7]
EXP.
MODE 1
A
J1
MODE 2
A
J1
E
J3 E J2 T J2 T J3 R J4 R J4
U
S1 U S1
X1
Slider Lever
X1
Slider Lever
X2
S2
X2
S2
The DR16 is a 16 channel receiver working at the 2.4GHz frequency band. It is compatible with the DT7 remote
controller.
Default Channel Mappings of DT7&DR16
Usages of the DT7 Remote Controller
Turn on the remote controller
1. Open the battery compartment on the back of the remote controller.
2. Install 4 AA batteries into the compartment according to the signs of negative and positive poles.
3. Push the power switch to the right to power on the remote controller. If the power LED indicator is solid red, the
remote controller is functioning normally.
4. The remote controller’s antenna should point skywards without obstructions for maximum communication range
during flight.
Turn off the Remote Controller
Push the power switch to the left to power off, the power LED indicator will be out and the remote controller will be
turned off.
Important Notes
Turn on the remote controller before powering on the aircraft. Power off the aircraft before turning off the
remote controller.
Avoid interferences between the remote controller and other wireless equipment.
Remove batteries from the remote controller before long term storage.
Ensure batteries in the remote controller have enough capacity before every flight.
Dispose of batteries according to their instructions.
©2013 DJI Innovations. All Rights Reserved.
- 2 -
Loading...