Dish 622 User Manual

Warning and Attention Symbols

You must be aware of safety when you install and use this system. This User Guide provides various procedures. If you do
some of these procedures carelessly, you could injure or kill yourself or damage equipment or property. Some other
procedures require special attention.

The WARNING! symbol means that if you are not careful,
You could injure or kill yourself, or
You could damage equipment or property.

ATTENTION! symbol means you should pay special attention to:

The
Important instructions for using the system, or
Important instructions for maintaining the system.

Class II symbol alerts qualified service personnel to use only identical replacement

The
parts in this apparatus.

For Your Safety

Do not try to open the case of the receiver. There is risk of electrical shock, which may cause damage to
the receiver and/or personal injury or death to you. There are no user-serviceable parts inside the
receiver. Opening the receiver case or making unauthorized changes will void the warranty.

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

Important Software Notice

As with all software controlled products, unexpected behavior could arise if the user tries to perform operations in a non­routine manner. This product, like almost any other high tech product, is subject to bugs and hence EchoStar CANNOT
AND DOES NOT GUARANTEE OR WARRANT THAT ALL FEATURES, SUCH AS PARENTAL CONTROL, WILL WORK
AS INTENDED UNDER ALL CIRCUMSTANCES. EchoStar endeavors to improve such conditions and will periodically
download improvements.

In compliance with the terms of the GNU Public License (GPL), EchoStar is making some source code available to the
public to download from www.echostar.com.

Equipment and Software Covered by this User’s Guide

This User Guide covers the ViP 622 DVR receiver and software model ViP622. This Guide may cover other devices, not
listed here.

Copyright Notice

Copyright © 2005 EchoStar Technologies Corporation, Englewood, Colorado 80112. All rights reserved.
The information in this User Guide may change without notice. We may issue revisions to tell you about such changes.
Please send comments or questions about this User Guide to: Technical Publications, EchoStar Technologies Corporation, 94 Inverness

Terrace East, Englewood, Colorado 80112.
Part Number: 143783
Printed in the United States of America.
DISH Network is a registered trademark of EchoStar Satellite L.L.C. For information about DISH Network, please visit our website at

www.dishnetwork.com.
We acknowledge all product names, trade names, or corporate names we mention in this User Guide to be the proprietary property of the

registered owners.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential

unpublished works. © 1992-1997 Dolby Laboratories. All rights reserved.

Important Safety Precautions v

1 Introduction

WELCOME 2
HOW TO USE THIS GUIDE 2
ABOUT YOUR DISH NETWORK ACCOUNT 4
WATCHING TV NOW 5
ADDITIONAL SERVICES 7
ABOUT SATELLITE TV RECEPTION 7
WHY CONNECT TO A PHONE LINE 8
MOVING ON-SCREEN LOGO 8

2 Receiver and Remote Controls

SATELLITE RECEIVER OVERVIEW 12
DUAL AND SINGLE MODES 13
REMOTE CONTROL 16
SATELLITE RECEIVER FRONT PANEL 21
SATELLITE RECEIVER BACK PANEL 21
USING THE MENUS 22
USING TEXT FIELDS 24

i

Table of Contents

3 Finding Programs to Watch

4 Pay Per Programs

5 Favorites Lists

CHANGING CHANNELS 28
USING THE PROGRAM GUIDE 28
USING THE BROWSE BANNER 30
USING THEMES AND SEARCH 31
USING PICTURE-IN-PICTURE 33

PAY-PER-VIEW 36
DISH ON DEMAND 36

WHAT ARE FAVORITES LISTS? 40
CREATING OR CHANGING FAVORITES LISTS 41
NAMING FAVORITES LISTS 41
USING FAVORITES LISTS 41

6 Locks

WHAT ARE LOCKS? 44
CREATING OR CHANGING A PASSWORD 45
LOCKING AND UNLOCKING YOUR RECEIVER 45
CREATING OR CHANGING RATINGS LOCKS 46
CREATING OR CHANGING CHANNEL LOCKS 47
LOCKING OR UNLOCKING PAY-PER-VIEW CHANNELS 47
HIDING ADULT CONTENT OR LOCKED CHANNELS 48
LOCKING OR UNLOCKING THE FRONT PANEL 49

7 Interactive TV

ii

DISH HOME INTERACTIVE TV 52

CUSTOMER SERVICE 52

8 Digital Video Recording

WHAT IS DVR? 54
PAUSING A PROGRAM 54
REVERSING, FAST FORWARDING, AND SKIPPING 55
SLOW MOTION AND FRAME-BY-FRAME 55
RECORDING A LIVE PROGRAM 56
PLAYING A RECORDED PROGRAM 56
USING RECORD PLUS 56
RECORDING WHILE WATCHING DIFFERENT PROGRAMS 57
RECORDING OPTIONS 59

9 Record Future Programs

Table of Contents

TIMERS AND RECORDINGS 62
USING THE TIMERS LIST 65
USING THE DAILY SCHEDULE 65
SETTING UP AN AUTOMATIC TIMER 66
SETTING UP A MANUAL TIMER 67
SETTING UP A DISH PASS™ TIMER 68
DELETING A TIMER 69

10 Remote Control Setup

IMPROVING RECEIVER CONTROL 72
CONTROLLING OTHER COMPONENTS 75
THE RECOVER BUTTON 82

iii

Table of Contents

11 Receiver Customization

USING SHARED VIEW 86
MODULATOR SETUP 86
USING MULTIMEDIA 86
USING CALLER ID 88
CHANGING LANGUAGES 89
USING CLOSED CAPTIONING 90
USING DOLBY® SURROUND SOUND 91
CHANGING THE PROGRAM GUIDE ORDER 92
CHANGING THE GUIDE DISPLAY 92
RESETTING TO FACTORY DEFAULTS 93
SCHEDULING RECEIVER UPDATES 94
INACTIVITY STANDBY 94

12 Connections and Setup

CONNECTING TO THE NEARBY TV (TV1) 98
CONNECTING TO THE REMOTE TVS (TV1 OR TV2) 101
CONNECTING TO YOUR DISH ANTENNA 104
CONNECTING THE PHONE LINE 105
CONNECTING A VCR TO THE REMOTE TV 107
CONNECTING OFF-AIR ANTENNA/CABLE TV 108
USING TROUBLESHOOTING TOOLS 113

Reference

TROUBLESHOOTING TABLES 116
REMOTE CONTROL DEVICE CODES 128

Appendix 131

iv

Index 141

Important Safety Instructions

1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that

produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider

than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obso­lete outlet.

10 Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11 Use only attachments/accessories specified by the manufacturer.
12 Unplug this apparatus during lightning storms or when unused for long periods of time.
13 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,

such as the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall
be placed on the apparatus.

v

Safety

Note to Satellite TV System Installer: This reminder is provided to call the satellite TV system installer’s

attention to Article 820-40 of the National Electrical Code (NEC) that provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as

close to the point of cable entry as practical.

• Operate the receiver using only the type of power source indicated on the marking label. Unplug the

receiver power cord by gripping the power plug, not the cord.

• Do not overload wall outlets or extension cords, as this can result in a risk of fire or electrical shock.

• Never insert objects of any kind into the receiver through openings, as the objects may touch dangerous

voltage points or short out parts. This could cause fire or electrical shock.

• Do not locate the antenna near overhead light or power circuits, or where it can fall into such power lines or

circuits. When installing the antenna, take extreme care to avoid touching such power lines or circuits, as
contact with them can be fatal.

• Do not attempt to service the receiver yourself, as opening or removing covers may expose you to danger-

ous voltage, and will void the Limited Warranty. Refer all servicing to authorized service personnel.

Proper Care of Your Equipment

• Always handle the satellite receiver carefully. Avoid excessive shock and vibration at all times as this can

damage the hard drive.

• Unplug the receiver from the AC power outlet before cleaning.

• If you have the receiver turned on and need to move it, be sure to unplug the receiver and let it sit for at

least 30 seconds before moving it.

• The use of accessories or attachments not recommended by the receiver manufacturer will void the Limited

Warranty.

• Do not place the receiver in an enclosure such as a cabinet without proper ventilation.

• Do not stack the receiver on top of or below other electronic devices as this can cause heat build-up and

vibration.

• Do not install the receiver in any area where the temperature can be less than 40°F or more than 113°F. If

the receiver is cold to the touch, do not plug it in immediately. Let it sit unplugged at room temperature for at
least 45 minutes before plugging it in.

• Use an outlet that contains surge suppression or ground fault protection. For added protection during a

lightning storm, or when the receiver is left unattended and unused for long periods of time, unplug the
power cord from the wall outlet, disconnect the lines between the receiver and the antenna, and disconnect
the telephone line. This will provide some protection against damage caused by lightning or power line
surges.

On some TVs, the presence of fixed images for extended periods of time may cause them to be
permanently imprinted on the screen. Consult your TV user guide for information on whether this is
a problem for your TV, what operating/viewing restrictions apply to avoid this problem, and
associated TV warranty coverage.

vi

Introduction

Introduction to DISH Network Services

So you bought yourself a new receiver and you want to know how it works, right? Take a
look through this guide and you’ll quickly learn how to use all of the features. This chapter
familiarizes you with your DISH Network satellite TV receiver.

• WELCOME

• HOW TO USE THIS GUIDE

• ABOUT YOUR DISH NETWORK ACCOUNT

• WATCHING TV NOW

• ADDITIONAL SERVICES

• A

BOUT SATELLITE TV RECEPTION

• WHY CONNECT TO A PHONE LINE

• MOVING ON-SCREEN LOGO

1

Chapter 1

Welcome

WELCOME

HOW TO USE THIS GUIDE

Thank you for choosing DISH Network. You are about to experience the excitement and
convenience of our Direct Broadcast Satellite (DBS) service, which delivers the very best
picture and sound quality. DISH Network consistently provides the latest products and
satellite-delivered services — with high performance, ease of operation, and a wide
variety of entertainment options.

Your new DISH Network Digital Video Recorder (DVR) receiver has three tuners (two
satellite and one off-air) for record and playback in standard or high definition. Additionally,
the DVR features and a host of other functions make it one of the most versatile and
exciting devices in home entertainment.

This satellite receiver lets you decide how you watch TV. You can record and play back
audio and video with full digital quality. You can pause a live program and not miss any of
the action or you can record a program to watch later, without a VCR.

This section explains how the guide is divided and the conventions used throughout.

Guide Overview

The information in this guide is separated into several chapters to make it easy for you to
find exactly what you’re looking for:

• Chapter 1 - Introduction gives you a brief overview of DISH Network and your new

receiver.

• Chapter 2 - Receiver and Remote Controls explains the basic features of your system

and how to use the remote controls, front panel buttons, and back panel connections.

• Chapter 3 - Finding Programs to Watch describes how to change channels and look

for programs.

• Chapter 4 - Pay Per Programs shows you how to order and watch Pay-Per-View and

DISH On Demand programs.

• Chapter 5 - Favorites Lists explains how to create, name, and use favorites lists.

• Chapter 6 - Locks explains how to set locks and passwords.

• Chapter 7 - Interactive TV describes how to use the dish home Interactive TV features

of your satellite TV system.

• Chapter 8 - Digital Video Recording explains how to use the recording features of your

satellite TV receiver to maximize your viewing pleasure.

• Chapter 9 - Record Future Programs shows you how you can record and play back

your favorite programs when you want to watch them.

• Chapter 10 - Remote Control Setup contains instructions for programming your

remote to control your satellite receiver and equipment like a TV or VCR.

• Chapter 11 - Receiver Customization shows you how to customize your receiver.

• Chapter 12 - Connections and Setup explains how to connect your satellite receiver to

your TV and equipment like a VCR.

2

Introduction

How to Use this Guide

Guide Conventions

• The names of remote control buttons are all uppercase.
Example: Press SAT.

• Select means to move the highlight to an on-screen option or choice in a list and press

SELECT on the remote control.

Example: Select the Locks option.

• Where this guide mentions nearby TV, it refers to the HDTV near the receiver. The

nearby TV receives TV1 menus and programming from the receiver’s TV1 outputs
and is connected using short audio/video cables.

• Where this guide mentions remote TV, it refers to the cable-ready TV(s) located in
rooms away from the receiver. The remote TV receives TV2 menus and programming
from the receiver’s TV2 outputs through your in-home cable system.

• Where this guide mentions remote control, it refers to either Remote Control 1 when
viewing a nearby TV or Remote Control 2 when viewing the remote TV(s). If a specific
remote control must be used, this guide will refer directly to Remote Control 1 or
Remote Control 2.

• The instructions in this guide are shown in two ways:

– Instructions in the form of pictures are handy if you’d like to learn something

quickly. These instructions are numbered left to right as shown in the sample
below.

– Instructions that are written out are helpful if you’d like to learn more details.

3

Chapter 1

About Your DISH Network Account

ABOUT YOUR DISH NETWORK ACCOUNT

This section describes how to order your packages and provides information on how to
find information about your DISH Network account.

Ordering Your Programming Packages

Before you can enjoy your new receiver, order your programming packages.

1 Press POWER on the front panel to turn on the receiver.
2 Press SYSTEM INFO on the front panel to display the receiver’s System Information

menu on the nearby TV screen.

3 Call 1-800-333-DISH (3474) and tell the Customer Service Center the system has been

installed and you would like to begin receiving services. A representative will explain the
available program packages. Give the representative information from the System
Information screen, as requested.

4 Your services will be turned on via the satellite signal. This process usually takes just a

few minutes.

5 Select DONE.

Where to Find Information on Your Account

If you want to know about charges to your DISH Network account or if you would like to
make changes to your programming packages, be sure to have your account information
handy and choose one of the following:

• Go to our website at www.dishnetwork.com/my account.

• Press MENU on your remote control to open the Main Menu and then select

Customer Service.

• Call DISH Network by calling 1-800-333-DISH (3474).

4

Note: Additional authorization may be required before high definition programming and/or

off-air broadcasts can be viewed; additional fees may apply.

WATCHING TV NOW

After you have ordered your programming package, you can begin enjoying the features
of your new satellite TV receiver. When you complete these simple tours, you’ll be familiar
with the remote control and be able to find a program to watch; pause live TV; and record
your favorite shows.

Finding a Program to Watch

You’re already itching to use your remote control, so pick it up now and find something to
watch. If you want to know more about watching TV, see Chapter 3 - Finding Programs to
Watch starting on page 27.

Introduction

Watching TV Now

5

Chapter 1

Watching TV Now

Pausing Live TV

Here’s something you can’t do with regular old TV: pause live TV because someone’s at
the door or calling you on the phone or there’s something you just have to do right now.
For more about the pause feature of your receiver, see Pausing a Program on page 54.

Recording and Playing Back a Program

Take this tour to learn how to make basic recordings of your favorite shows. For more
about the DVR features of your receiver, see Chapter 8 - Digital Video Recording starting
on page 60.

6

ADDITIONAL SERVICES

Pay-Per-View

Catch all the action on Pay-Per-View. Take a break from regular TV and order the latest
movies, sports, and special events. For details on ordering Pay-Per-View events, see
page 36. Be sure to connect an active phone line to your receiver before you order a Pay­Per-View event (see the instructions on page 105).

DISH On Demand

Enjoy movies and other programming any time without schedules, without waiting and
without leaving your home.

dish home

At dish home (press DISH on your remote control), you’ll find news, sports scores,
weather information, TV and movie buzz, customer service, games, and more.

PocketDISH

Introduction

Additional Services

Connect a PocketDISH (sold separately) to your receiver to transfer your favorite recorded
programs and take them wherever you go.

ABOUT SATELLITE TV RECEPTION

Satellite television uses satellites in a stationary orbit over the Earth to deliver television
and audio programming. This type of orbit enables the satellites to stay aligned over one
place on the surface of the Earth. Once the satellite dish is aimed at the satellite, the dish
does not have to move to follow it.

Here’s something interesting! Noted science fiction author Arthur C. Clarke
calculated the orbit that causes satellites to remain stationary in the sky. To this
day the 22,000 mile high orbit bears the name Clarke Belt.

Rain and Snow Fade

Heavy rain, snow, or dense cloud cover can
reduce the satellite signal, which may interrupt
your programming service. Your service will
return after the weather condition has passed.
Aiming the satellite dish to get the strongest
signal during installation, will help prevent rain
and snow from interrupting the signal.

7

Chapter 1

Why Connect to a Phone Line

Solar Interference

Twice a year, the sun moves to a position behind
the DISH Network satellite as it
orbits the Earth. This event occurs during a few
days at the beginning of the spring
and the beginning of the autumn and lasts only a
few minutes.

During these brief periods, you will not be able to
see programs on DISH Network.
When the sun has moved from behind the
satellite, the programs will reappear. This is
an unavoidable natural event for all television
involving the use of satellites and has an adverse
effect on many program providers.

WHY CONNECT TO A PHONE LINE

Your satellite receiver is equipped with a standard telephone jack that you use to connect
to an active telephone line. Keep the receiver connected to an active telephone line so
that you will be able to order pay-per-view programs using your remote control, use all of
the dish home Interactive TV features, and other services from DISH Network (see the
instructions on page 105).

MOVING ON-SCREEN LOGO

Whenever the receiver is turned off using the remote control or front panel POWER
button, you will see the DISH Network logo moving around on your TV screen. This
feature is included with your receiver to assure you that the connections between your
receiver and TV(s) are not lost. Press POWER or SELECT on the remote control to
resume watching satellite TV programming. Make sure you are using the correct remote
for your TV-viewing location (see page 16 for details).

8

Introduction

Tips

TIPS

• Always have the latest software - Turn off the receiver when you’re not using it.

• Order Pay-Per-View with your remote control - Keep an active phone line

connected to the receiver. Not only will you have Pay-Per-View at your fingertips, but
you’ll also avoid unnecessary charges.

QUESTIONS

• How do I find something to watch? Refer to page 5. For more information on finding

something to watch, see Chapter 3 - Finding Programs to Watch.

• Why are some of the channels red in the Program Guide? The channels that are
red in the Program Guide are those which are not currently in your subscription. If
you’d like to watch those channels, call 1-800-333-DISH (3474) or go to
www.dishnetwork.com.

• I’m looking at program information in a guide I bought at the grocery store, but
nothing matches what’s on my DISH Network receiver, is something wrong? No.

DISH Network programming may vary from what you’ll find in a local publication. For
best results, use the Program Guide on your receiver or order DISH Entertainment.

9

Chapter 1

Questions

Notes

10

Receiver and Remote Controls

About Your Satellite Receiver

This chapter helps you get to know your remote control, which lets you use all the
functions of your receiver. After you read the information here, be sure to practice what
you learn so that you can quickly understand what’s presented in later chapters.

What you’ll find in this chapter:

• SATELLITE RECEIVER OVERVIEW

• DUAL AND SINGLE MODES

• REMOTE CONTROL

• SATELLITE RECEIVER FRONT PANEL

• SATELLITE RECEIVER BACK PANEL

• USING THE MENUS

• USING TEXT FIELDS

11

Chapter 2

Satellite Receiver Overview

SATELLITE RECEIVER OVERVIEW

This section gives you an overview of your DISH Network satellite TV receiver system.

Satellite Receiver

Use this dual-tuner satellite receiver to watch different programs in two locations:

• Nearby TV (TV1) - Programming from the receiver is delivered to the nearby TV using
short audio/video cables.

• Remote TV(s) (TV2) - Programming from the receiver is delivered to the remote TV(s)
using existing in-home coaxial cable.

Remote Controls

Two remote controls come with your receiver:

• Remote Control 1 - An Infrared (IR) remote to control programming for the nearby TV
(TV1). This remote is labeled with a green number 1, which matches similar markings
on the receiver output connections and the menus for the nearby TV.

• Remote Control 2 - An Ultra-High Frequency Pro (UHF Pro) remote to control
programming at a remote TV (TV2). This remote is labeled with blue number 2,
which matches similar markings on the receiver output connections and the menus for
the remote TV. Be sure to set up the remote to control the receiver (see page 72).

12

DUAL AND SINGLE MODES

Your satellite receiver includes two modes of operation: Dual and Single. These modes
increase your entertainment options because you’ll be able to choose how you watch and
record your favorite programs.

Dual Mode

While in Dual Mode, you can use this dual-tuner satellite receiver to watch different
programming in two separate locations:

• Nearby TV - Programming from the receiver is delivered to the TV near the receiver
using short audio/video cables and is controlled using Remote Control 1. The Nearby
TV is also referred to as “TV1.”

• Remote TV - Programming from the receiver is delivered to a TV located in another
room using existing in-home coaxial cable and is controlled using Remote Control 2.
The video displayed on the remote TV is always in standard definition (SD). The
Remote TV is also referred to as “TV2.”

Satellite Receiver

Dual and Single Modes

You can tell your receiver is in Dual Mode because the Mode front panel indicator will light
and the menu and other screens will display Dual Mode (as shown below).

13

Chapter 2

Dual and Single Modes

Single Mode

Single Mode provides dual-tuner receiver features—like Picture-in-Picture (PIP) and the
ability to watch one live program while recording another—to all connected TVs.

14

Single Mode delivers the same programming to all of the TVs connected to the satellite
receiver and allows this programming to be controlled by either remote control. The format
of the programming shown on the remote TV(s) is standard definition (SD) and high
definition (HD) is shown only on the nearby TV. You can tell you are in Single Mode
because the Mode front panel indicator will light and the menus and other screens will
display Single Mode (as shown below).

Satellite Receiver

Dual and Single Modes

Switching Between Dual and Single Mode

Put the satellite receiver in Single or Dual Mode by pressing the front panel MODE button.
Keep the following items in mind when switching the satellite receiver between Dual and
Single Mode:

Dual Mode Single Mode

Indications

Recording

Favorites
Lists

Dual Mode front panel
indicator lights.

The Recording front panel
indicator lights to show
whether TV1, TV2, or both
are currently recording.

Favorites Lists set up for
both outputs (TV1 and TV2)
are available.

Locks set up for both outputs
(TV1 and TV2) are available.

Locks

Note: If someone is using the TV2 outputs in Dual Mode, you will see a popup on the

nearby TV warning you that you are about to disrupt the use of the TV2 outputs.

Single Mode front panel
indicator lights.

The TV1 Recording front
panel indicator lights when
you are recording from one
or both tuners.

Only Favorites Lists set up
for TV1 are available. The
lists for TV2 are not lost,
they are simply unavailable
in Single Mode.

Locks set up for only TV1
are available. The locks for
TV2 are not lost, they are
simply unavailable in Single
Mode.

15

Chapter 2

Remote Control

REMOTE CONTROL

Types of Remote Controls

The two remote controls give you access to all the features of your satellite receiver. You
can set up each remote to control the satellite receiver and up to three other devices (see
page 75). These devices can be a TV, a VCR or DVD player, and a third device.

This section describes how to use the various features on the two types of remote controls
included with your satellite TV system.

Remote Control 1 uses infrared (IR)
signals to:

• Control TV1 menus for the nearby

TV in Dual Mode.

• Control the satellite receiver in

Single Mode.

IR signals travel only short distances
(60 feet or less), and cannot go
through walls or other solid objects.
You must point the remote control
directly at the device, with no objects
blocking the line of sight.

Remote Control 1 uses IR signals
to control both the receiver and other
devices programmed into the remote.

This remote control is identified by the
green number 1 at the bottom of the
remote control.

Remote Control 2 uses UHF Pro
signals to:

• Control TV2 menus for the remote

TVs in Dual Mode.

• Control the satellite receiver in

Single Mode.

UHF Pro signals travel long distances
and go through walls and other solid
objects.

To use Remote Control 2 to control
the receiver, you must attach the UHF
antenna to the receiver back panel
(see page 17).

Remote Control 2 uses IR signals to
control other devices programmed
into the remote. You must point the
remote control directly at these
devices, with no objects blocking the
line of sight.

This remote control is identified by the
blue number 2 at the bottom of the
remote control.

16

Satellite Receiver

Remote Control

Remote Control Batteries

The remote control comes with AAA batteries. When you replace old
batteries, you should replace all of the batteries. Use batteries of the same
kind, for example, alkaline or carbon zinc. Don’t mix batteries of different
kinds. Alkaline batteries last longer.

1 Press down on the top of the battery cover and slide the cover off.
2 Take out all of the old batteries.
3 Put the new batteries in. Make sure you match the plus (“+”) ends with the

plus markings on the battery case.

4 Slide the cover back into place.

Low Battery Warning

When you see a low battery warning message on your screen below the Program Banner,
the batteries in your remote control are weak and need to be replaced.

Here's a helpful hint...Don’t wait until you see this warning to change the remote
control batteries. If your remote control doesn’t seem to be working very well (for
example, you have to press POWER more than once to turn the receiver on or off),
it’s a good indication that the batteries are getting weak.

Attach the Remote Antenna

Attach the UHF remote antenna to the receiver's back panel Remote Antenna input so you
can use your UHF Pro Remote Control 2. Without the UHF antenna, you cannot use the
remote to control the receiver. See Adjusting the Remote Antenna on page 74 for more
detailed information about improving the performance of your UHF Pro remote control.

17

Chapter 2

Remote Control

Remote Control Buttons

18

Satellite Receiver

Remote Control

19

Chapter 2

Remote Control

20

SATELLITE RECEIVER FRONT PANEL

Satellite Receiver

Satellite Receiver Front Panel

SATELLITE RECEIVER BACK PANEL

21

Chapter 2

Using the Menus

USING THE MENUS

Open and Close Menus

The menus make using the receiver and selecting programs quick and easy. Use the
menus to control the receiver and to use its features, such as setting locks, choosing a
program, or creating a favorites list.

You can open the menus in either of two ways:

• Press MENU to open the Main Menu, then open any of the other menus from the Main
Menu.

• Use the following buttons on the remote control:

– Press GUIDE to open the Program Guide.

– Press THEMES (LEFT ARROW) when watching a program to open the Themes

and Search menu.

– Press BROWSE (RIGHT ARROW) to display the Browse Banner.

To close a menu and return to watching a program, press VIEW LIVE TV.

Highlighting Menu Options

Use the remote control ARROWS to move the on-screen highlight to the menu option.
When you move the on-screen highlight, the option becomes amber.

Selecting Menu Options

When you select a menu option, that option takes effect right away. You can select a menu
option in either of two ways:

• Move the highlight to the menu option using the remote
control ARROWS. Then press SELECT. In the example,
Program Guide is highlighted.

• If the option has a number next to it, press the number on
the NUMBER PAD button that matches this number. When
you use the NUMBER PAD, you do not need to highlight the
option first.

22

Satellite Receiver

Using the Menus

List of Choices in the Menus

When you make a choice in a list, the receiver does not apply the change until you select
Save or Done. If you do not want to save any changes, select Cancel to discard all the
changes made in the menu.

There are two types of lists:

• A single choice list allows you to select only one choice at a time.
If you select another choice, your previous choice is deselected.

• A multiple choice list allows you to select more than one choice
at one time. If you select another choice, your previous choice(s)
stays selected.

Canceling a Procedure

You can cancel a procedure in any of three ways:

• If you want to return to watching a program, press VIEW LIVE TV.

• If you want to return to the previous menu, press CANCEL.

• Wait a few moments and the menu will close automatically, discarding any changes

you have made.

23