Dirt Devil DDC05-E01, DDC05-P01 Instruction manual

Download

Page 1

CYLINDER VACUUM

Bagless cleaner

USER GUIDE

DDC05-E01/DDC05-P01

DD_Real Power M28_OUTPUT-RK.indd 1 26/03/2015 10:48

Page 2

DD_Real Power M28_OUTPUT-RK.indd 2 26/03/2015 10:48

Page 3

MACHINE OVERVIEW TABLE OF CONTENTS

Overview of the scope of delivery (Fig. 1)

1 Dirt container release button 2 Post-motor ﬁlter 3 Post-motor ﬁlter cover 4 Cord retraction button 5 On/Off switch 6 Blockage light 7 Floor tool parking slot 8 Power cord with plug 9 Small motor protection ﬁlter 10 Release catch 11 Dirt container 12 Separator and shroud 13 Pre-motor ﬁlter sponge 14 Pre-motor ﬁlter 15 Dirt container lid 16 Carrying handle 17 Handle 18 Air vent 19 Telescopic tube 20 Dusting brush 21 Crevice tool 22 Hose connector 23 Hose release buttons 24 Combi ﬂoor tool 25 “Carpet/hard ﬂoor” selector (illustration serves

as an example)

26 Parking hook

1 Overview of your vacuum 2

Technical data 3 Guarantee 3

2 Safety instructions 4 3 Before use 6

3.1 Selecting a tool/accessory 6

3.2 Assembly 7 4 Use 8

4.1 Operational safety 8

4.2 How to Use 8

4.3 Switching off 9

4.4 Transport and storage 9 5 Maintenance 10

5.1 Empty the dirt container 10

5.2 Cleaning dirt container and pre-motor ﬁlter 11

5.3 Cleaning the post-motor ﬁlter 12

5.4 Spare parts and accessories 13

5.5 Troubleshooting 14

Technical Data

Type of appliance

Model name

Model number

Voltage

Power

Dust bin capacity

Power cord length

Weight

Bagless cylinder vacuum cleaner

Cyclone XS

DDC05-(E01/P01)

220 – 240V ~, 50 Hz

1,000 W

max. capacity: approx. 1.8 litres

approx. 5 m

approx. 4 kg

OVERVIEW

We reserve the right to make changes to technical and design specifications in the interest of continuous product improvement. © Dirt Devil.

LIMITED GUARANTEE

It’s quick and easy to register for your free 1 year guarantee online at www.DirtDevil.co.uk.

Please retain your original receipt for proof of purchase. Please make a note of the serial number and model number of the product before calling.

DD_Real Power M28_OUTPUT-RK.indd 3 26/03/2015 10:48

Page 4

WARNING

BASIC SAFETY PRECAUTIONS

• This vacuum cleaner is intended for household use only and NOT for commercial or industrial use.

• Only use the vacuum cleaner indoors on dry surfaces and keep the area you’re cleaning well lit.

• Keep ngers, hair and loose

clothing away from moving parts and openings whilst using the vacuum cleaner.

• This vacuum cleaner can be used by children aged from 8 years and above and persons

with reduced physical, sensory

or mental capabilities or lack of

DON'TS

• Don’t use the vacuum cleaner

if it has been dropped,

damage or left outdoors.

• Don’t run over the power cord or use vacuum cleaner if the power cord or plug is damaged. Please contact our Customer Service on: 0330 026 2626 (Mon-Fri 9:00am-5:00pm).

• Don’t handle the plug or use the vacuum cleaner with wet hands.

experience and knowledge if they have been given supervision or instruction concerning use of the vacuum cleaner in a safe way and understand the hazards involved. Children shall not play with the vacuum cleaner. Cleaning and user maintenance shall not be made by children without supervision.

• Only Dirt Devil recommended tools should be used with the

vacuum cleaner, use of

non-branded Dirt Devil accessories/tools will invalidate your guarantee.

handle, pull the power cord around corners, sharp edges

or close a door over the power cord.

• Don’t unplug the vacuum cleaner by pulling on the power cord.

• Don’t vacuum up any

ammable or combustible materials (lighter uid, petrol,

kerosene etc) or use the vacuum cleaner in an area with explosive vapours or liquid.

• Don’t pull or carry the vacuum cleaner by the power cord.

• Don’t use the power cord as a

DD_Real Power M28_OUTPUT-RK.indd 4 26/03/2015 10:48

• Don’t vacuum up hot coals, cigarette butts, matches or

smoking hot burning items

Page 5

WARNING

DON'TS CONTINUED...

or use in an area where

there may be harmful uids (chlorine, bleach, and

ammonia drain cleaner).

• Don’t attempt to remove blockages with sharp objects as this may cause damage

to the vacuum cleaner, remove

blockages only as instructed in this guide.

DO'S

• Turn off all controls on the vacuum cleaner before disconnecting or connecting the plug from the mains socket.

• Always make sure both the

pre-motor/post-motor lters are

in place before use.

• Take extra care when using and positioning the vacuum cleaner on the stairs

• Always switch off the vacuum

cleaner before disconnecting or connecting the hose and accessories.

• Keep all openings clear and

free from debris as this may

affect the airow/suction.

• Don’t vacuum up hard or sharp

objects such as glass, nails,

screws or coins etc.

• Don’t use the vacuum cleaner with incorrect voltage as this may result in damage or injury to the user. The correct voltage is listed on the ratings label.

• Use only CE approved 13amp

extension cords, non-approved

extension cords may overheat. Care should be taken to arrange the extension cord as it can be a trip hazard.

• Store the vacuum cleaner in

a cool, dry area. If the lters

have been cleaned as per the user guide instructions ensure they are thoroughly dry before storing away.

PLEASE KEEP INSTRUCTIONS FOR FURTHER USE AND USE ONLY AS INSTRUCTED IN THIS GUIDE.

SAFETY

INSTRUCTIONS

• Always replace the fuse in the

plug with a British 13amp fuse. Always protect the power cable from heated surfaces

and open ames.

DD_Real Power M28_OUTPUT-RK.indd 5 26/03/2015 10:48

Page 6

3.1 SELECTING A TOOL/ACCESSORY

1. Select the tool/accessory according to

the surface to be cleaned:

- Combi tool (Fig. 2/1):

Floor tool for cleaning both carpets

and hard ooring.

- Crevice tool (Fig. 2/2):

Use this to vacuum dust from hard

to reach places.

- Dusting brush (Fig. 2/3):

Use this to vacuum dust off objects

that have sensitive surfaces.

- Turbo tool (Fig. 2/4*):

Is used to vacuum non-sensitive carpets,

runners, mats, and the like.

*Some models only:

2. Check the selected tool/accessory for damage.

ATTENTION: Use only intact tool/accessory. If damaged, the nozzle may allow dust to escape or scratch the surface.

DD_Real Power M28_OUTPUT-RK.indd 6 26/03/2015 10:48

Page 7

3.2 ASSEMBLY

CAUTION

Before vacuuming, make sure that the ﬁtted tool/ accessory suits the surface to be cleaned. Also observe the ﬂooring manufacturer's recommendations.

USE

BEFORE

IMPORTANT: Risk of injury! Only attach the tool/accessory if the appliance is not connected to the power supply. The cylinder vacuum cleaner could be switched on by accident.

*(Some models only)

1. Attach the selected tool/accessory to

the bottom end of the telescopic tube (Fig. 3/A1) or hose handle (Fig. 3/B1).

2. Insert the end of the suction hose into

the intake opening (Fig. 4/A) of the vacuum cleaner until you hear and feel it locking into place.

DD_Real Power M28_OUTPUT-RK.indd 7 26/03/2015 10:48

If using the telescopic tube:

3. Insert the hose handle into the upper end

of the telescopic tube (Fig. 4/B).

4. Adjust the length of the telescopic tube (Fig. 4/C). Press down the release latch on the tube to do this. Then extend the telescopic tube to the desired length. Let go of the release catch while pulling until it locks in place. You will hear a distinct click.

Page 8

CAUTION

Only use the cylinder vacuum cleaner when all ﬁlters are intact, dry and correctly ﬁtted. Make sure that no objects obstruct the telescopic tube, the suction hose or other openings.

4.1 OPERATIONAL SAFETY

IMPORTANT: Risk of injury! Check machine and power cord before each use. A damaged machine must never be used.

IMPORTANT: Take extra care when positioning and using the vacuum cleaner on the stairs

IMPORTANT: The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does

overheat the thermostat will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off and unplug. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the vacuum cleaner to cool for approximately 1 hour (if you have cleaned the ﬁlters please wait 24 hours for the ﬁlters to fully dry before putting back into the machine).

4.2 HOW TO USE

IMPORTANT: When unwinding the power cord do not pull further than the yellow marker.

1. Pull out the cord by the

plug up to the yellow mark (Fig. 5/1) and no further than the red mark

(Fig. 5/2).

2. Plug into the mains.

3. Switch on the cylinder

vacuum cleaner with the on/off switch (Fig. 5/4).

4. If using the combi tool, set

the "carpet/hard floor" selector according to the type of floor that is to be cleaned (Fig. 6):

- Fig. 6/A: for deep- and short-pile carpets, rugs.

- Fig. 6/B: for smooth

floors, e.g. parquet, tiles, PVC, etc.

5. Open the air vent on the

handle to reduce the suction if required.

IMPORTANT: When leaving your working-area, switch off the appliance and comply with the notices in chapter 4.3, "Switching off". This will help avoid accidents.

DD_Real Power M28_OUTPUT-RK.indd 8 26/03/2015 10:48

Page 9

4.3 SWITCHING OFF

CAUTION

Never store the machine directly next to heat sources (e.g. heater, oven). Avoid exposure to direct sunlight. Heat can damage the machine.

USE

1. Switch off the cylinder vacuum cleaner

with the on/off switch (Fig. 5/4) and unplug from the mains.

4.4 TRANSPORT AND STORAGE

n Only carry the machine by its carrying- handle (Fig. 7/1).

n If you want to store the machine for longer period of time, empty the dirt container, > Chapter 5.1, 'Emptying the dirt container module'.

2. Keep the plug in your hand.

3. To retract the power cord, push the cord

retracting button (Fig. 5/3).

n Store the machine in a cool, dry place, out

of the reach of children. For storage you can park the telescopic tube on the vacuum cleaner by inserting the parking-hook (Fig. 7/2) of the combi tool into the parking slot (Fig. 7/3).

DD_Real Power M28_OUTPUT-RK.indd 9 26/03/2015 10:48

Page 10

5.1 EMPTYING THE DIRT CONTAINER

CAUTION

Switch off the machine before emptying the dirt container. This will prevent dirt from damaging the machine.

n It is best to empty the dirt container after

each vacuuming session.

n Empty the dirt container at the latest:

- if the blockage light (Fig. 8/A1)

lights up;

- the "MAX" marking (Fig. 8/B1) has been

reached; or

- before prolonged storage or dispatch.

1. Switch off the machine, chapter 4.3, 'Switching off'.

2. Remove the dirt container from its bracket by pressing the dirt container release button on the dirt container lid (Fig. 8/A2).

3. Empty the dirt container by holding it low over a dustbin and only then press the release catch (Fig. 8/B).

4. If the dirt container can no longer be

completely cleaned by simply opening

the bottom, the separator and shroud has to be removed to be cleaned. > Chapter 5.2 'Cleaning the dirt container and pre-motor filter'.

DD_Real Power M28_OUTPUT-RK.indd 10 26/03/2015 10:48

Page 11

5.2 CLEANING THE

DIRT CONTAINER AND PREMOTOR FILTER

CAUTION

The dirt container and the ﬁlter elements are washable, but may not be cleaned in dishwashers or washingmachines. Also, do not use detergents or brushes with hard bristles to clean them.

n It is best to check the pre-motor filter each time you empty the dirt container, > Chapter 5.1, 'Emptying the dirt container'.

n Clean the pre-motor filter at the latest when

the blockage light (Fig. 8/A1) lights up.

1. Switch off the machine, remove the dirt

container and empty it, > Chapter 5.1, 'Emptying the dirt container'.

2. Release the dirt container lid by firmly

turning anti-clockwise (Fig. 9/A). Remove it from the dirt container.

3. Pull the pre-motor filter up and out of the dirt container (Fig. 9/B).

4. Remove the separator and shroud from the dirt container in an upward motion (Fig. 9/ C).

5. Remove any residual dirt still clinging to the

dirt container, separator and shroud using a dry cloth or a soft brush, e.g. the supplied

furniture brush.

IMPORTANT: Refrain from cleaning the separator and shroud with water. Otherwise, adhering dirt particles may clog the separator and shroud.

6. Hold the pre-motor filter low over a dirt bin. Separate the filter elements from one another. Remove larger agglomerations of dirt by hand. Tap filter over a dirt bin to remove any dirt and debris.

7. Rinse the pre-motor filter under water

(Max 40°C).

IMPORTANT: Let the ﬁlters dry for approx. 24 hours at room temperature after cleaning. Only put them back into the appliance when they are completely dry.

9. If one of the filter elements is damaged,

replace it with a new one, > Chapter 5.4, 'Spare parts and accessories'.

10. Put the separator and shroud back into the

dirt container (Fig. 10/B). Take care that the two wide tabs and the narrow tab engage

in the wide grooves and the small groove,

respectively.

11. Reassemble the pre-motor filter and put it

back onto the separator and shroud

(Fig. 11/A).

12. Put the dirt container lid back on (Fig.

11/B). Take care that the two wide tabs and the narrow tab engage in the wide

grooves and the small groove, respectively.

13. Lock the lid by turning it firmly clockwise

(Fig. 11/C) until it audibly clicks into place.

MAINTENANCE

DD_Real Power M28_OUTPUT-RK.indd 11 26/03/2015 10:48

Page 12

5.3 CLEANING THE POST MOTOR FILTER

n Check the post-motor filter every time

you clean the pre-motor filter, > Chapter

5.2, 'Cleaning the dirt container and pre-motor filter'.

1. Switch off the machine, > Chapter 4.3,

'Switching off'.

2. Push the release catch of the post-motor filter cover down (Fig. 12/A) and open the post-motor filter cover.

3. Remove the post-motor filter (Fig. 12/B).

4. Check the post motor filter for

any discolouration.

5. If the post motor filter is heavily

discoloured replace.

6. If the post-motor filter is damaged,

replace it, > Chapter 5.4, 'Spare parts and accessories'.

7. Re-fit the post-motor filter (Fig. 13/A).

8. Attach the post-motor filter cover at the

bottom side first (Fig. 13/B) before folding

it up firmly. It will audibly snap into place.

DD_Real Power M28_OUTPUT-RK.indd 12 26/03/2015 10:48

Page 13

5.4 SPARE PARTS

CAUTION

Only Dirt Devil recommended spares and accessories should be used with the vacuum cleaner, use of nonbranded Dirt Devil spares and accessories will invalidate your guarantee.

Spare parts can be reordered from: www.DirtDevil.co.uk or alternatively call 0330 026 2626.

MAINTENANCE

DD_Real Power M28_OUTPUT-RK.indd 13 26/03/2015 10:48

Page 14

5.5 TROUBLESHOOTING

IMPORTANT: Risk of injury! Never use a faulty machine! Always switch off the machine and disconnect it from the mains before starting troubleshooting > chapter 4.3, "Switching off".

Problem

Blockage light (Fig. 1/6) lights up or cleaning results are not satisfactory.

Why does my vacuum cleaner have no power?

Solution

The dirt container is full. Empty the dirt container > Chapter 5.1, 'Emptying the dirt container'.

The ﬁlters are dirty. Clean the ﬁlter > Chapter 5.2, 'Cleaning dirt container and pre-motor ﬁlter' or > Chapter 5.3, 'Cleaning the post-motor ﬁlter'.

Tool/accessory, telescopic tube or suction hose is blocked. Remove the obstruction. If necessary, use a long wooden stick (e.g. a broomstick) to do this.

The air vent (Fig. 1/20) is open. Close the air vent (Fig. 1/20).

The attached tool/accessory, is unsuitable. Change the tool/ accessory, > Chapter 3.2, 'Selecting the proper nozzle'.

The position of the 'carpet/hard ﬂoor' selector (Fig. 1/27) is inappropriate. Set the 'carpet/hard ﬂoor' selector (Fig. 1/27) to the correct position for the type of ﬂoor, > Chapter 4.2, 'How to vacuum', step 4.

The motor thermostat may have tripped. If this has happened, unplug the vacuum cleaner. Remove and empty the dirt container and check the hose for blockages. Clean the filters and allow the vacuum cleaner to cool for approximately 1 hour (if you have washed the filters you will need to wait 24 hours for the filters to fully dry before putting them back into the vacuum cleaner).

The plug may not be fully pushed into the electrical socket.

Check the fuse in the plug if this needs replacing, always replace with a British 13amp fuse.

NOTE:

If you were unable to solve the problem using the information in the table above, please contact our Customer Service (UK) 0330 026 2626.

DD_Real Power M28_OUTPUT-RK.indd 14 26/03/2015 10:48

Page 15

MAINTENANCE

DD_Real Power M28_OUTPUT-RK.indd 15 26/03/2015 10:48

Page 16

Call our Customer Service Department at 0330 026 2626

Monday-Friday 9:00am to 5:00pm.

www.DirtDevil.co.uk

Dirt Devil. 2 Colmore Square, 38 Colmore Circus, Queensway, Birmingham, B4 6B N.

EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited trading as Dirt Devil, hereby on our own

responsibility, declare that the DDC05-E01/DDC05-P01 series is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

DD_Real Power M28_OUTPUT-RK.indd 16 26/03/2015 10:48