DIGIWEIGH DWP-PCWTR User Manual

LED location

Status

Indication

Communicate LED（left）

10Hz frequency flash

Normal communication

0.3Hz frequency flash

Sleeping status,

communicate break

Battery voltage LED（middle）

flashing

Battery voltage too low,

need to recharge

Not flashing

Battery voltage in good status

Charger LED（right）

Red light on

Charging status

Green light on

Battery is full

Neither red or green light on

Charger adapter is not connecting

LED location

Status

Indication

Communicate LED（left）

10Hz frequency flash

Normal communication

Not flashing

communicate break

Battery voltage LED（middle）

flashing

Battery voltage in AD transmitter too

low,

need to recharge

Not flashing

Battery voltage in good status

Power supplier LED（right）

Green light on

Power supply status

Green light off

Power off status

Transmitter

Excitation 3.3v
Input <12.9 mv
Power 4V-5.5V

Receiver

Excitation 5-15V
Output 3mV/V

Load cell and Indicator wiring connection
1 +Excitation
2 +Signal
3 -Signal
4 -Excitation
5 Shield

Wireless Kit for Weighing Scale

AD Transmitter DA Receiver
FCC ID 2AAV4DWP-PCWTX 2AAV4DWP-PCWRX
Accuracy 1/10,000 for any indicator
Load cell 1 to 12 load cells 350Ω
Frequency bands 915MH z
Power consumption 270 hours under weighing mode for one load cell 350Ω, 29 months under sleeping

mode( battery should be recharged every 5 months)

Range 150 meters
Working temperature -10℃ to +60 ℃

LED indication AD transmitter LED indication

DA receiver LED indication

Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.