1
Digitech Co., Ltd. www.riding-evolved.com
B-COCKPiT
Operating Manual
BC-28 Models
B-COCKPiT BC-28 Operating Manual
Revision: EN-20171014
B-COCKPiT BC-28 Operating Manual
2
Digitech Co., Ltd. www.riding-evolved.com
Important Information Regarding Safe Operations:
1. Turn OFF the main power of the E-bike before plug / unplug the HMI, or it may
lead to permanent electrical damage to the HMI and the E-bike.
2. Do Not overtighten the bolts when installing the HMI to the E-bike, a torque of
0.2N.m is sufficient to secure the HMI to the handlebar, overtightening the bolts
may cause damage to the HMI.
3. Do not immerse the unit in water or clean it with pressurized water. Clean the
unit using a soft cloth dampened only with water. Do not use any detergents.
4. The USB port, when exposed, does not provide water protection. When riding in
the rain, an external device must not be connected and the USB Cap must be
completely closed and sealed.
5. Do not dispose HMI or any other e-bike components into house-hold wastes,
follow your local regulations and dispose them in an environmental-friendly
manner.
6. Damage / malfunction caused by improper installation or usage are not covered
by after-sales service.
B-COCKPiT BC-28 Operating Manual
3
Digitech Co., Ltd. www.riding-evolved.com
Table of Contents
Frequent Asked Questions .............................................................................. 4
Product Description and Specifications .............................................................. 5
Parts Description ..................................................................................... 5
Dimensions and Features ............................................................................ 6
Te chnical Data ........................................................................................ 7
Installation ................................................................................................. 7
Install Center Display Unit .......................................................................... 7
Install Side Control Unit ............................................................................. 8
Connect the cables ................................................................................... 8
System Operations ....................................................................................... 9
Initial Operations ..................................................................................... 9
Button Functions .................................................................................... 11
Meter Interface ...................................................................................... 12
Menu Interface ....................................................................................... 15
Miscellaneous Interfaces .............................................................................. 16
On-Guard Mode ...................................................................................... 16
Error-Code Notification ............................................................................. 16
Maintenance and Service ............................................................................. 17
Maintenance and Cleaning ......................................................................... 17
After-sales Service .................................................................................. 17
Disposal ............................................................................................... 17
B-COCKPiT BC-28 Operating Manual
4
Digitech Co., Ltd. www.riding-evolved.com
Frequent Asked Questions
Q: What riding modes does B-COCKPiT Support?
A: B-COCKPiT Supports up to 9 levels of pedal assist, as well as level 0 (zero assist), this can be
customized base on customer requirements. 6km/h Startup/Push assist mode is supported by
default, and is activated by pressing and holding the "-" key. Throttle control is also supported,
but B-COCKPiT kit does not include a throttle.
Q: Can end user customize or tune the pedal assist parameters by themselves via B-COCKPiT?
A: No, without proper knowledges the end user may set the e-bike to behave strangely or even
lead to dangerous situations, so we don't recommend to have end users be able to adjust the
Pedal Assist Level, Motor Output Curves or other PAS system parameters, these parameters should
be pre-loaded into B-COCKPiT by e-bike makers and not be adjusted by end users.
Q: How does B-COCKPiT Interact with Bikewise APP?
A: Most of the time they communicate via bluetooth, unlike many products, they don't keep a
constant communication which drains smart phone battery rather quickly, instead they use ondemand data transfer. Only when you open the Bilewise APP, it will download your e-biking
activities data from B-COCKPiT automatically via bluetooth so keep the ebike close. You can sync
the data manually too. Once synced, all your tour data will be securely stored in the clouds for
you to review at any time.
Keep in mind the B-COCKPiT HMI has limited data storage space, so it is recommeded to sync it to
Bikewise on a timely basis, there might be extreme situations (like riding for a year without sync
with Bikewise) causing insufficient data storage space in B-COCKPiT, in such case, the oldest data
will be dumped in order to make space for new data.
Q: Is Bikewise APP mandatory to use B-COCKPiT HMI?
A: No, B-COCKPiT can be used alone without Bikewise APP at all, but Bikewise does provide a
good managing hub for your E-biking activities and your e-bike itself. Also phone call notification
and anti-theft options are not available without Bikewise support. And the APP is free, so why not
^_^?
Q: Can one B-COCKPiT E-bike pair with multiple Bikewise APPs?
A: No, it becomes "personal property" once bonded with an Bikewise account, but in case if you
want to lend the bike to your friend and your friend also wants to use Bikewise APP to track
his/her tours, simply un-bond the E-bike in your APP, then your friend will be able to bond it to
his/her APP, then bond it back when the e-bike is returned to you. All your own personal tour
record will be preserved, and other people's data will not invade your space. Trust us this is much
simpler and straight forward than a complicated "authorization control".
B-COCKPiT BC-28 Operating Manual
5
Digitech Co., Ltd. www.riding-evolved.com
1
2 3 4
5
6
7
8
Product Description and Specifications
Parts Description
Center Mounted Display Unit
1. 2.8” 240x320 color TFT display
2. USB Port with protective cap
3. Mounting Bracket
4. “+” Button
5. “-” Button
6. E-bike light switch
7. “i” display function button
8. On/Off button
Side Mounted Control Unit
6
Digitech Co., Ltd. www.riding-evolved.com
Dimensions and Features
Core Data
Display Type 240x320 Color TFT LCD
Nominal Voltage 24 / 36 / 48 VDC
Supported Modes 0 - N with Walk Assist
Bus System UART / CAN
Connectivity Bluetooth* / GPS** /GSM**
Peripheral Port USB x1
Dimensions
Dimension A 58 mm
Dimension B 95 mm
Dimension C 71 mm
Dimension D 2.8 inch
Dimension E 11.5 mm / 14 mm**
Dimension F 22.2 / 25.4 / 31.8 mm
Keypad
No. of Buttons 5
Button Functions + / - / i / Power / Light
* Available for BC-28S ** Available for BC-28N
Displayed Information
Real Time Speed Digital and Graphical
Real Time Motor Power Digital and Graphical
Battery Level Digital and Graphical
Pedal Assist Level Yes
Max Speed Yes
Average Speed Yes
Single Trip Duration Yes
Single Trip Distance Yes (Reset-able)
Total Distance Yes
Calories Burnt Yes
Personal Record Yes (Reset-able)
Phone Call Notification Yes
Maintenance Notification Optional
Light Indication Yes
Error Code Yes
Setup Menu Yes
Conformities
IP-Level IPX5 (USB Cap Closed)
Certifications CE / EN15194 / RoHS
B-COCKPiT BC-28 Operating Manual
7
Digitech Co., Ltd. www.riding-evolved.com
Rated operating voltage
24V / 36V / 48 V DC
Rated operating current
TBD mA
Max operating current
TBD mA (36V, USB Charging)
Off-state leakage current
TBD mA
Output current to controller
TBD mA
USB port output
5V, 1000mA
Internal Li-ion battery *
3.7V, 1250mAh
Operating temperature
-20°C ~ +45°C
Storage temperature
-20°C ~ +45°C
1-1
1-2
2-1
2-2
Technical Data
* Applicable to BC-28N model
B-COCKPiT BC-28 Operating Manual
Installation
Install Center Display Unit
1. Use 2 M3 Hex Socket Screw 1-1 & 1-2 to secure the mounting bracket to the handle bar.
Tightening torque: 0.2N.m. Do Not Overtighten or it may cause damage to the HMI
2. Adjust the display to your preferred angle and lock with 2 M3 Hex Socket Screws 2-1 & 2-2.
3. If installing on a handle bar with 22.2mm or 25.4mm diameter, use the supplied adapter rings.
B-COCKPiT BC-28 Operating Manual
8
Digitech Co., Ltd. www.riding-evolved.com
3
Arrow mark
Arrow mark
Install Side Control Unit
1. Use M3 Hex Socket Screw 3 to lock the control unit to the left side of the handle bar.
2. Tightening torque: 0.2N.m. Do Not Overtighten or it may cause damage to the HMI
Connect the cables
1. Securely connect the cables of B-COCKPiT with E-bike controller by aligning the 2 arrow marks.
B-COCKPiT BC-28 Operating Manual
9
Digitech Co., Ltd. www.riding-evolved.com
System Operations
Initial Operations
Set System Time
1. Long press “i” to enter the system menu.
2. Use “+” / “-” to navigate to the “Setup” line and press “i”.
3. Select “Set Date & Time” and following items using the same method.
4. In each page, use “+” / “-” to adjust the parameters,
5. The parameters being adjusted are shown as flashing numbers.
6. When finished, press “i” to proceed to the next parameter until all parameters are set.
* Setting the date and time manually is not mandatory if planning to pair the B-COCKPiT with
Bikewise APP, by using Bikewise APP the system time of B-COCKPiT will be synced to the date and
time of user’s mobile phone automatically.
B-COCKPiT BC-28 Operating Manual
10
Digitech Co., Ltd. www.riding-evolved.com
Connect to Bikewise APP
1. Long press “i” to enter the system menu.
2. Use “+” / “-” to navigate to the “Connect To APP” line and press “i”.
3. Scan the QR-Code displayed on the screen with Bikewise APP.
11
Digitech Co., Ltd. www.riding-evolved.com
Short Press
Long Press
Long Press & Hold
Meter Interface
Assist level Up
----
----
Menu Interface
Cursor Up / Increase
----
----
Short Press
Long Press
Long Press & Hold
Meter Interface
Assist level Down
----
6km/h Start-up Mode
Menu Interface
Cursor Down / Decrease
----
----
Short Press
Long Press
Long Press & Hold
Meter Interface
Change Display Mode
Enter Menu Interface
----
Menu Interface
Ok / Confirm
----
----
Short Press
Long Press
Long Press & Hold
Meter Interface
E-bike Lights On/Off
----
----
Menu Interface
E-bike Lights On/Off
----
----
Short Press
Long Press
Long Press & Hold
Meter Interface
----
System On/Off
----
Menu Interface
----
System On/Off
----
Short Press
Long Press
Long Press & Hold
Meter Interface
----
----
----
Menu Interface
----
Advanced Settings
----
Button Functions
1. “+” button:
2. “-” button:
3. “i” button:
B-COCKPiT BC-28 Operating Manual
4. “Light” button:
5. “Power” button:
6. & together:
B-COCKPiT BC-28 Operating Manual
12
Digitech Co., Ltd. www.riding-evolved.com
i
i
Real-time Speed
Assist Level
Motor Power
Trip Distance
Meter Interface
Meter Interface is the default interface of B-COCKPiT.
Display Modes
In Meter Interface, short press “i” to cycle through different display modes.
Pure Mode Today Overall
Depend on user preference, each mode can be used as the main dashboard since all critical data
such as speed, assist mode, power output and trip distance are available in each mode.
Pure Mode
B-COCKPiT BC-28 Operating Manual
13
Digitech Co., Ltd. www.riding-evolved.com
Assist Level
Ride Time Today
Motor Output
Real-time Speed
Cal Burnt Today
Daily Achievement
Today
* Ride time will pause if the e-bike is not moving, and will reset at 00:00 every day.
B-COCKPiT BC-28 Operating Manual
14
Digitech Co., Ltd. www.riding-evolved.com
Real-time Speed
Assist Level
Current Time
Battery Level
Lights Indicator
Phone-call Notification
Data Indication
Trip Distance
Trip Average Speed
Trip Max Speed
Trip Time
Trip Cal Burnt
Total Distance
Overall
* When clearing Trip Distance, Trip Time, Avg. Speed, Max. Speed and Cal Burnt will also be
cleared together.
The Status Bar
* All interfaces share a common status bar, Phone-call notification is enabled by Bikewise APP.
The “Data Indication” is only available on S and N models, it will appear if the HMI has
riding data in its own storage and ready to be synced with Bikewise APP.
B-COCKPiT BC-28 Operating Manual
15
Digitech Co., Ltd. www.riding-evolved.com
CAUTIONS REGARDING ADVANCED SETTINGS
Changing the parameters in “Advanced Settings” without proper knowledge
may cause abnormal behaviors of the E-bike.
And may even lead to unsafe situations.
Consult with the manufacturer first before making any changes on your own.
Connect to APP
Clear Data
Setup
System Info.
Clear Trip Dist.*
Clear Personal Best
Restore Default
Set Date & Time
Set Unit
Set Brightness
Set Auto-off Timer
Wheel Size
Speed Limit
HMI Version
Set Date yy.mm.dd
Set Time (24 hrs)
Metric – Km
Imperial -Mile
Advanced
Settings
Wheel Size
Speed Limit
15 – 50 km/h
QR Code
Menu Interface
In Meter Interface, long press “i” to enter Menu Interface.
The Menu is only accessible when the E-bike is stationary.
Menu Map
* “Clear Trip Dist.” will also clear: “Trip Time”, “Avg. Speed”, “Max. Speed”, “Cal Burnt”
B-COCKPiT BC-28 Operating Manual
16
Digitech Co., Ltd. www.riding-evolved.com
Error-Code
Description
Corrective Measure
21
Controller Protection
Check if 3-phase power lines are properly connected
22
Throttle Error
Check throttle connection, replace motor if necessary
23
Motor Phase Error
Check motor connection, replace motor if necessary
24
Speed Sensor Error
Check sensor connection, replace sensor if necessary
25
Brake Error
Check Brake connection, replace brakes if necessary
30
Communication Error
Check connectors and contacts between each components
Miscellaneous Interfaces
On-Guard Mode
This page is shown when the B-COCKPiT is put in “On-Guard” mode through Bikewise APP.
It is essentially the “Anti-theft activated” mode for the E-bike.
If e-bike motion is detected in this status, B-COCKPiT will send Alerts to the Bikewise APP user via
tele-communication, and the integrated GPS module can help the user to locate the e-bike.
* Available for BC-28N
Alert Locate
Error-Code Notification
Error-Code Table (example only, customer dependent)
B-COCKPiT BC-28 Operating Manual
17
Digitech Co., Ltd. www.riding-evolved.com
Maintenance and Service
Maintenance and Cleaning
Do not immerse the unit in water or clean it with pressurized water.
Clean the unit using a soft cloth dampened only with water. Do not use any detergents.
! The USB port, when exposed, does not provide waterproof protection. When riding in the rain,
an external device must not be connected and the USB Cap must be completely closed and sealed.
After-sales Service
Please contact support@riding-evolved.com for inquiries and after-sales services.
Disposal
Follow your local regulations and dispose the B-COCKPiT unit in an environmental-friendly manner.
Do not dispose B-COCKPiT or any other e-bike components into house-hold wastes!
Loading...