9,500 ANSI / 10,500 ISO Lumens | Contrast Ratio: 6,000:1 (Dynamic Black) 1,000:1 native | Part No:119-735
Colour System:DMD Specification:
Laser Phosphor with enhanced colourwheel
Display Type:
1 x 0.67" WQXGA+ TRP UHD DMD™
Display resolutions 4K-UHD (3840 x 2160)
or WQXGA+ (2716 x 1528)
8.3 megapixels on screen at 4K-UHD
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio:
16:9
Fill Factor
Not applicable: Smooth Picture DMD™
Key Features
Video & Graphics Processing
HDR processing
Two projectors in one - 4K-UHD and WQXGA+
DisplayPort 1.2 with HDCP 2.2
2 x HDMI 2.0 with HDCP 2.2
2 x HDMI 1.4b inputs with HDCP 1.4 for Dual Pipe processing and Frame Sequential 3D Format.
Sequential Processing: 3D via single HDMI 1.4b input
Dual Pipe Processing: 3D Left and Right Eyes via two HDMI 1.4b inputs
Synchronisation of active glasses
3G-SDI with loop-through
DICOM simulation mode
Geometry Correction
Onboard 4-Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, Arc, and Image Rotation
User definable custom warp
Digital zoom, pan and scan.
Independent four boundary blanking control for custom input window sizing
Scaling available for fixed aspect ratio screens.
Unscaled processing for pixel mapped display.
Edge Blending
Blending control available for all sides with width control.
Correction for non-active pixels at the edge of the display.
Picture in Picture
Two sources can be displayed simultaneously using 2D inputs with the original aspect ratios maintained
HDBaseT® Interface
Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable
Allows projector to be placed up to 100m from source with low cost cabling
Supports up to 4K UHD 3840 x 2160@60Hz 4:2:0 or 4K UHD 3840 x 2160@30Hz 4:4:4
Colour Processing
Four colour modes available: ColorMax / Manual Color Matching / Color Temperature / Gains and Lifts
Powerful seven point colour correction for accurate colour matching with presets
Easy colour temperature selection
Manual seven point colour adjustment
Traditional lifts and gains
Projector Controller Software
Intuitive user interface for network control
Simultaneous control of user-defined groups of projectors
At-a-glance monitoring of projector status
Projector Automation
Real-time clock provides daily on/off automation
E-mail alerts for system status
Source Compatibility:
2D graphics standards up to 4K-UHD 3840 x 2160 resolution at 60Hz via HDMI 2.0, HDBaseT (4:2:0) and DisplayPort
inputs.
3D graphics standards up to WQXGA at 120Hz DualPipe via HDMI 1.4b inputs.
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
WQXGA+ mode
2D sources up to WQXGA+ at 120Hz can be displayed scaled to fit WQXGA+.
3D sources up to WQXGA at 120Hz can be displayed scaled to fit WQXGA+.
4K-UHD mode
2D sources up to 4K-UHD will be displayed scaled to fit 4K-UHD.
Auto mode
Sources greater than WQXGA+ will be displayed scaled to fit 4K-UHD.
Sources up to WQXGA+ will be displayed scaled to fit WQXGA+.
Inputs/Outputs
Video & Computer
TypeConnectorQty
DisplayPort 1.2 (2D)
HDMI 1.4b (3D)
HDMI 2.0 (2D)
3G-SDI in (2D)
3G-SDI out
HDBaseT (see LAN) (2D)
3D Formats SupportedHDTV Formats Supported
Frame Sequential
Dual-Pipe
Computer CompatibilityBandwidth
2D
4K-UHD up to 60Hz.
WQXGA+ up to 120Hz.
3D
Supported formats will be displayed within WQXGA+.
Remote ControlAutomation Control
Addressable IR remote control, wireless and wired.
On-Board keypad
Colour Temperature
3200K to 9300K
DisplayPort
HDMI
HDMI
BNC
BNC
RJ45
1
2
2
1
1
1
Communication & Control
TypeConnectorQty
3D Sync Out
3D Sync In
LAN
RS232
Wired Remote
12V Trigger
3D Sync IR Out
NOTE: One of the LAN
ports is shared with
HDBase-T.
498 megapixels per second via DisplayPort and HDMI 2.0.
Crestron RoomView® Connected
PJLink Class 1
LAN
RS232
AMX (Device Discovery)
Served web pages (projector status, projector control,
Crestron RoomView®, network settings, alert mail setup,
time setup, error log, On Screen Display)
* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more
details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/2%, INSIGHT Series: +/-2%,
Lens Mount
Motorised and programmable shift, zoom and focus.
Intelligent Lens Memory with 10 user-definable preset positions (except UST lens).
Operating: 5 to 40C (41 to 104F)
Storage: -10 to 60C (14 to 140F)
10 to 85% non-condensing ((with maximum temperature
of 40C )
Weight (Chassis Only)Dimensions
31 kg
63.34 lb
L: 59.83 cm x W: 50 cm x H: 21.85 cm
L: 23.55 in x W: 19.68 in x H: 8.60 in
Safety & EMC Regulations
UL/cUL, BIS, CB, CCC, CQC Eco label, CECP, KC, KTL,
IC,BSMI, RoHS (China), RoHS (EU),FCC Class A,
FDA,CE, IEC EN 60825-1 Class 3R Laser Product, IEC
EN 62471-5 Risk Group 2, WEEE (EU)
*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this
display for more accurate information.