Digital Projection dVision 30XG, dVision XG Product Sheet

PERFORMANCE SPECIFICATIONS

Brightness (±10%)

sx+: 5,000 ANSI lumens 30sx+: 6,000 ANSI lumens HD: 2,500 ANSI lumens XG: 4,500 ANSI lumens 30XG: 5,500 ANSI lumens

Contrast Ratio (full on/full off)

ALL: 6000:1 with Iris

Display Type

sx+: .95” DarkChip2™ DMD HD: .8” DarkChip3™ DMD XG: .7” DarkChip3™ DMD

Sequential Color Management

sx+: dual four segment color wheel HD: dual six segment color wheel XG: dual four segment color wheel

Native Resolution

sx+: 1400 x 1050 pixels HD: 1280 x 720 pixels XG: 1024 x 768 pixels

Computer Compatibility

Up to 1600 x 1200

Video Compatibility

HDTV, NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, SECAM; HDCP on DVI; Faroudja™ deinterlacing with automatic film mode detection (3:2 and 2:2 pulldown)

Aspect Ratio (native)

sx+: 4x3 HD: 16x9 XG: 4x3

Bandwidth (up to)

205 MHz on analog RGB 160 MHz on DVI 75 MHz on component input

•No lens shift capability on short throw fixed lenses

SX+ • 30SX+ • HD • XG • 30XG

Digital Projection International proudly offers the dVision series, ultra-quiet, dual lamp projectors based on singlechip DLP™ technology. Available in four distinct resolution platforms including XGA, 720P, SXGA+ and 1080P, dVisions employ either dual 250-watt lamps, producing up to 5000 ANSI lumens, or dual 300 watt lamps, producing up to 6000 ANSI lumens. In either case, contrast ratios up to 6000:1 can be achieved using the motorized lens aperture, which allows the user to accurately define contrast and brightness to match venue and content requirements.

The cost-effective dVisions bring the extraordinary performance and imaging expertise of Digital Projection within reach of every application. A flexible range of ultraaccurate optics deliver throw ratios as short as .75:1 and as long as 9:1, as a function of screen width. The dVision’s quick-change motorized lens mount provides an extensive range of horizontal and vertical lens shift. Every dVision is also equipped with a motorized light shutter and a backlit projector information display, which provides users with all relevant data regarding the projector’s operating status.

Intuitive user controls and extensive source compatibility render dVisions simple to integrate, control and operate. The projectors’ low-cost, long-life dual UHP™ lamp system and inherent digital stability position these products as perfect projection solutions for a diverse range of customers and applications, including:

• Dramatic home entertainment

• Digital media and advertising

• Corporate boardrooms and teleconferencing suites

• Training and education

• Retail and entertainment

• Religious venues/houses of worship

• Casinos and hospitality

• Military simulation/command and control

• Immersive visualization

As is the case with all Digital Projection displays, our careful engineering and superior customer and technical service guarantee dVision projectors will provide remarkable imaging and reliability for the long-term.

™DLP, Digital Light Processing and DMD are trademarks of Texas Instruments, Inc.

INPUT / OUTPUT AND CONTROL CAPABILITIES

Connector

15-pin female HD-DSUB BNCx5 - female DVI-D - female RCAx3 - female 4-pin mini DIN- female RCAx1- female

9-pin DSUB - female USB - female RJ-45 - female

3.5mm stereo jack- female

15-pin female HD-DSUB 9-pin DSUB - male

Lens Shift (motorized)

sx+: Vert: ±0.54; Hor: ±0.46 HD: Vert: ±0.67; Hor: ±0.48 XG: Vert: ±0.54; Hor: ±0.46

Motorized Iris

Enables the user to optimize lumen/contrast performance

Lenses

Image Size

0.7-5.5 meters (2.5-18ft) wide

Lamp Type

sx+, HD, XG: Dual 250W UHP™ 30sx+, 30XG: Dual 300W UHP™

Lamp Life (Typical)

2,000 hours-lamp high per lamp 4,000 hours-lamp low per lamp

Mechanical Mounting

Front/rear table Front/rear ceiling Adjustable front/rear feet

Operating Noise Level

30dB (typical) 35dB (maximum)

Dimensions (excluding lens)

15.7in(L) x 19.7in(W) x 7.9in(H) 400mm(L) x 500mm(W) x 200mm(H)

Weight (chassis only)

27.8lbs (12.6kg)

Input

Video & computer

VGA / analog RGB RGB analog DVI (digital RGB) Component Video S-Video Composite VIdeo

Communication & control

RS232 USB

(for control & firmware update)

LAN (for control & firmware update) Remote control

Outputs

VGA monitor out RS232

HD:

0.875:1*

1.32:1

1.42-1.86:1

1.86-2.73:1

2.73-4.37:1

4.37-7.65:1

sx+:

0.8:1*

1.2:1

1.3-1.7:1

1.7-2.5:1

2.5-4.0:1

4.0-7.0:1

XG:

1.1:1

1.65:1

1.78-2.32:1

2.32-3.42:1

3.42-5.47:1

5.47-9.57:1

PRELIMINARY SPECIFICATIONS

DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD. SUITE 115. KENNESAW. GA. 30144 • T-770.420.1350 • F-770.420.1360 • www.digitalprojection.com DIGITAL PROJECTION, LTD. • GREENSIDE WAY. MIDDLETON. MANCHESTER. UK. M24 IXX • T-+44.161.947.3300 • F-+44.161.684.7674 • www.digitalprojection.co.uk

Projector dimensions (mm)

W1 500 H1 200 L1 400

Projector dimensions (in)

W1 19.7 H1 7.9 L1 15.7

HDTV Formats Supported

Scan Rates Supported

Remote Control

Automation Control

Operating/Storage Temperature

Operating Humidity

Thermal Dissipation

Fan Noise

Power Requirements

Power Consumption

Safety and EMC Regulations

ADVANCED TECHNICAL SPECIFICATIONS

PARAMETERS

1080i, 720p, 576i/p, 480i, 480p

Horizontal: 15-150kHz; Vertical: 48-190Hz

Remote wireless IR / wired thru 3.5mm stereo jack

RS232 9-pin D sub / RJ45 LAN / USB

Operating: 32 to 104°F at 0-4950 ft, 32 to 95°F at 4950-99,000 ft / Storage: 14 to 104°F

20 to 90% RH

3500 BTU/hour

28dB at 20°C (68°F)

90-260 VAC, 50/60Hz

900W

CSA, CE, FCC Class A

dVision sx+

dVision 30sx+

dVision HD

dVision XG

dVision 30XG

Replacement lamp module

Ceiling mount

Infrared remote (replacement)

PROJECTORS

PART #

104-083

104-084

104-085

104-086

104-087

104-088

104-089

104-090

104-091

dVision back panel

ACCESSORIES

PART #

HD:

0.875:1

1.32:1

1.42-1.86:1

1.86-2.73:1

2.734.37:1

4.37-7.65:1

LENSES

PART #

104-082

105-821

104-081

105-823

105-822

1 Based on 4-6 hour/day operational profile. Venue and application conditions may impact actual lamp life.

See Digital Projection’s Product Warranty Statement for details on lamp warranty.

2 Two lamps required for full lumen performance

XG:

1.1:1

1.65:1

1.78-2.32:1

2.32-3.42:1

3.42-5.47:1

5.47-9.57:1

sx+:

0.8:1

1.2:1

1.3-1.7:1

11.7-2.5:1

2.5-4.0:1

4.0-7.0:1