PERFORMANCE SPECIFICATIONS
Brightness (±10%)
sx+: 5,000 ANSI lumens
HD: 2,500 ANSI lumens
Contrast Ratio (full on/full off)
sx+: 6000:1 with Iris
HD: 6000:1 with Iris
Display Type
sx+: .95” DarkChip2™ DMD
HD: .8” DarkChip3™ DMD
Sequential Color Management
sx+: dual four segment color wheel
HD: dual six segment color wheel
Native Resolution
sx+: 1400 x 1050 pixels
HD: 1280 x 720 pixels
Computer Compatibility
Up to 1600 x 1200
Video Compatibility
HDTV, NTSC, NTSC 4.43, PAL, PAL-M,
PAL-N, SECAM; HDCP on DVI; Faroudja™
deinterlacing with automatic film mode
detection (3:2 and 2:2 pulldown)
Aspect Ratio (native)
sx+: 4x3
HD: 16x9
Bandwidth (up to)
205 MHz on analog RGB
160 MHz on DVI
75 MHz on component input
Lens Shift (motorized)
sx+: Vert: ±0.54; Hor: ±0.46
HD: Vert: ±0.67; Hor: ±0.48
•No lens shift capability on short throw
fixed lenses
SX+ • HD
Digital Projection International proudly offers the
dVision series, ultra-quiet, dual lamp projectors
based on single-chip DLP™ technology. The
dVision sx+ employs an SXGA+ native resolution
DMD™, producing up to 5,000 ANSI lumens and
up to 6000:1 contrast. The dVision HD employs a
DMD™ with 1280 x 720 pixels and produces a
stunning 6000:1 contrast and up to 2,500 ANSI
lumens. These cost-effective projectors bring the
extraordinary performance and imaging expertise
of Digital Projection within reach of every application.
The dVisions’ intuitive user controls and extensive
source compatibility render them simple to
integrate, control and operate. The projectors’
low-cost, long-life dual UHP™ lamp system and
inherent digital stability position the dVision series
as perfect projection solutions for a diverse
range of customers and applications, including:
•Dramatic home entertainment
•Digital media and advertising
•Corporate boardrooms and
teleconferencing suites
•Training and education
•Retail and entertainment
•Religious venues/houses of worship
• Casinos and hospitality
•Military simulation/command and control
•Immersive visualization
As is the case with all Digital Projection displays,
our careful engineering guarantees dVision
projectors provide remarkable imaging and
reliability for the long-term. Equally important, our
legacy in superior customer and technical
services assures our experienced support staff is
always available to address your needs.
The dVision sx+ and dVision HD—compact,
awe-inspiring displays—bringing the precision of
Digital Projection to every venue.
Specifications subject to change without notice DP V2.03/05 ©2005 Digital Projection, Inc.
™DLP, Digital Light Processing and DMD are trademarks of Texas Instruments, Inc.
INPUT / OUTPUT AND CONTROL CAPABILITIES
Connector
15-pin female HD-DSUB
BNCx5 - female
DVI-D - female
RCAx3 - female
4-pin mini DIN- female
RCAx1- female
9-pin DSUB - female
USB - female
RJ-45 - female
3.5mm stereo jack- female
15-pin female HD-DSUB
9-pin DSUB - male
Quantity
SX+ HD
11
11
11
11
11
11
11
11
11
11
11
PRELIMINARY SPECIFICATIONS
Motorized Iris
Enables the user to optimize
lumen/contrast performance
Lenses
HD: sx+:
0.875:1* 0.8:1*
1.32:1 1.2:1
1.42-1.86:1 1.3-1.7:1
1.86-2.73:1 1.7-2.5:1
2.73-4.37:1 2.5-4.0:1
4.37-7.65:1 4.0-7.0:1
Image Size
0.7-5.5 meters (2.5-18ft) wide
Lamp Type
Dual 250W UHP™
Lamp Life
1
2,000 hours-lamp high (typical) per lamp
4,000 hours-lamp low (typical) per lamp
Mechanical Mounting
Front/rear table
Front/rear ceiling
Adjustable front/rear feet
Operating Noise Level
30dB (typical)
35dB (maximum)
Dimensions (excluding lens)
15.7in(L) x 19.7in(W) x 7.9in(H)
400mm(L) x 500mm(W) x 200mm(H)
Weight (chassis only)
33lbs (15kg)
Input
Video & computer
VGA / analog RGB
RGB analog
DVI (digital RGB)
Component Video
S-Video
Composite VIdeo
Communication & control
RS232
USB
(for control & firmware update)
LAN (for control & firmware update)
Remote control
Outputs
VGA monitor out
RS232