While the information in this manual has been compiled with great care, it may not be deemed an assurance of product characteristics. devolo shall be liable only to the degree specified in the terms of sale and delivery.
The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is
subject to written authorization from devolo. We reserve the right to make any alterations that arise as the result of technical
development.
You can find all declarations and certifications of compliance for the products, as long as they were available at the time of
publication, in the appendix of this documentation.
Trademarks
®
dLAN
is a registered trademark of devolo AG.
®
HomePlug
Linux
Mac
Windows
is a registered trademark of HomePlug Power Alliance.
®
is a registered trademark of Linus Torvalds.
®
and Mac OS X® are registered trademarks of Apple Computer, Inc.
®
and Microsoft® are registered trademarks of Microsoft, Corp.
devolo and the devolo logo are registered trademarks of devolo AG. All other names mentioned may be trademarks or registered trademarks of their respective owners.
Subject to change without notice. No liability for technical errors or omissions.
Thank you for placing your trust in this devolo
product.
The dLAN 85 HSplus allows you to set up your own home network with almost
no effort. Because the clever dLAN technology transmits the data over the
household electrical wiring, you do not have to lay any new cables. You do not
even have to do without an electrical socket, as the dLAN
power supply to which you can connect your terminal devices or multiple sockets
as usual. The integrated mains filter significantly improves data transmission in
the home network.
Surfing on the Internet is fast and secure with transfer rates of up to 85 Mbps
and DESpro encryption with the dLAN
first-generation high-speed dLAN adapters (14 or 85 Mbps).
85 HSplus. It is also fully compatible with
About this manual
After a brief introduction to "dLAN" and "Green IT" basics in Chapter 1, Chapter 2 will cover successfully setting up your dLAN 85 HSplus. Chapter 3 explains
how to configure your dLAN network. Technical specifications, tips for band
width optimisation and our warranty conditions can be found in Chapter 4 and
conclude the manual.
85 HSplus provides a
-
devolo dLAN 85 HSplus
|
|
Page 5
Preface
|
Icons
This section contains a brief description of the icons used in this manual.
5
Very important note. Failure to observe this note may result in damage.
Important note that should be observed.
Additional information, background material and configuration tips for your
device.
And if you are satisfied with your dLAN 85 HSplus, be sure to have a closer look
at our other products which are also designed to make your connected lifestyle
easier and simpler!
We hope you have just as much fun reading this manual as we had writing it. If
you have any further ideas or suggestions related to our products, we would be
delighted to hear from you at support@devolo.com!
devolo on the Internet
For detailed information on our products, visit www.devolo.com. The download area not only contains product descriptions and documentation, but also
updates of devolo software and your device's firmware.
We especially recommend the extensive devolo manuals on the topic of home
networking that contain a wealth of interesting background information. These
are available free of charge and can be downloaded from the Service & Support
area of our website.
devolo dLAN 85 HSplus
|
|
Page 6
Introduction
6
|
1Introduction
dLAN is an intelligent, secure technology that lets you set up a home network
easily, quickly and economically via your household electrical wiring, without the
need for complex and expensive dedicated cabling. The available performance
and effort required for the installation also compares favourably to traditional
methods—dLAN technology now attains speeds you would expect from other
LAN technologies, and installing it is a breeze!
1.1What exactly is dLAN?
dLAN (direct Local Area Network) uses the household electrical wiring to transfer data between computers equipped with suitable adapters and other network
components. As a result, any power outlet can be used as a network access
point. The data is modulated prior to transfer and sent as a signal via household
power lines. State-of-the-art technology ensures that the power and data net
devolo dLAN 85 HSplus
|
|
-
Page 7
works do not interfere with one another. Networking via dLAN is fast and
secure. The data is encrypted using a key to prevent interception by third parties.
1.2devolo—Up to speed on green IT
The topic everyone is talking about is green IT. devolo has an easy solution: the
power saving mode, which comes standard with the home network adapters,
sets the company apart from many competitors in the IT industry. And that has
been the case even before global warming and the scarcity of resources have
become concerns on everyone's mind.
Developers at devolo, have for a long time kept a close eye on how much power
dLAN adapters may consume. After all, a devolo network via electrical sockets
should not only be convenient, but also require as little energy as possible—
particularly during times when it is not being used.
That devolo can satisfy the demand for energy efficiency is evidenced by the patented power saving mode in the devices. It automatically lowers energy
consumption by 30 – 50
nected equipment are switched off.
The power saving mode in the adapters is not only a tribute to environmental protection but also a real service to the customer. Most people tend to forget
to regularly press the standby button on the hardware. The patented technol
ogy in devolo adapters allows you to save energy without having to do
anything. And if less energy is consumed, your electric meter will turn more
slowly. In other words, every minute the adapter is in power saving mode, you
will save money.
A dLAN adapter connected to a computer can only go into power saving mode
if the network card of the switched-off computer is also inactive. If you are using
a network card that remains active even when the computer is switched off, we
recommend connecting the computer to an on/off switch using a multiple socket
so that both the computer and the integrated n et wo rk ca rd are de - e ne rg i se d.
% when the computers in the dLAN network or con-
Introduction
|
7
-
devolo dLAN 85 HSplus
|
|
Page 8
Introduction
8
|
1.3The dLAN 85 HSplus at a glance
The dLAN 85 HSplus quickly and easily establishes a network connection
over the household electrical wiring.
Simple plug-and- play connection between the routers, computers and other
network-compatible devices!
The integrated electrical socket enables additional terminal devices or mul-
tiple sockets to be connected to the adapter just as a normal wall socket—
no power supply is lost.
The integrated mains filter significantly improves data transmission in the
home network.
The "Quality of Service" function and transfer rates of up to 85 Mbps are
enough for bandwidth-hungry applications, e.
telephony and Internet media. Automatic data prioritisation ensures inter
ference-free reproduction of voice and video data.
Reduced energy consumption with patented power save mode (see Section
1.2 '
devolo—Up to speed on green IT'), i.e. if no data transmission is taking
place, the energy consumption is automatically decreased by 30 %.
No configuration is necessary—plug the dLAN 85 HSplus into the power
outlet, connect it to your computer via the network cable and you are ready
to go!
Full compatibility with devolo adapters of the first dLAN generation
(14 or 85 Mbps).
User-friendly software for PC (Windows XP/Windows Vista), Mac and Linux
allows individual network encryption for even more security.
g. online gaming, VoIP
-
devolo dLAN 85 HSplus
|
|
Page 9
1.4Sample applications
1.4.1Networking between two computers
1.4.2Internet standalone solution
Extending Internet over the electrical wiring
Introduction
|
9
devolo dLAN 85 HSplus
|
|
Page 10
Introduction
10
|
1.4.3Internet multiple installation solution
Networking IP telephone and computer; online gaming over the electrical wiring
For additional application scenarios, as well as answers to frequently asked
questions (FAQs) about dLAN networks, visit our website at www.devolo.com.
devolo dLAN 85 HSplus
|
|
Page 11
2Initial use
This chapter covers everything you need to know to set up you r dLAN 85 HSplus.
It will explain connecting the dLAN
introduce the included devolo software and guide you through its installation.
2.1Package contents
Please ensure that the delivery is complete before beginning with the installation
of your dLAN
delivery:
dLAN 85 HSplus (Starterkit: 2 dLAN 85 HSplus)
Network cable (Starterkit: 2 network cable)
Printed information leaflet
CD containing software and online documentation
devolo AG reserves the right to change the package contents without prior
notice.
2.2System requirements
85 HSplus: The following components are included in the scope of
Initial use
|
85 HSplus and its functions. We will also
11
Operating systems: Windows XP (32 bit), Windows Vista (32/64 bit),
Linux, Mac
Network connection
Please note that your computer or other device must feature a network adapter
with a network port.
Please note that dLAN devices such as the devolo dLAN duo (14 Mbps) and
devolo dLAN 85 HSplus (85 Mbps) can be used on the same household electrical wiring as dLAN 200 AV devices (200 Mbps) without interference, but they
will not be able to communicate directly with one another. More valuable information about dLAN is available in the Service & Support section of our
website at www.devolo.com.
OS X and any other operating system with network support
devolo dLAN 85 HSplus
|
|
Page 12
Initial use
12
|
2.3Functions
The dLAN 85 HSplus has three control lamps (LEDs). The device is also equipped
with an integrated electrical socket and a network jack.
Illustration is country-specific.
2.3.1Control lamps (LEDs)
greendLAN 85 HSplus is ready for operation.
orangedLAN 85 HSplus is in standby mode.
greenA connection to the dLAN network exists; flashes when data
greenA 100 Mbps or 10 Mbps connection to the Ethernet net-
devolo dLAN 85 HSplus
|
Power
dLAN
Ethernet
|
is being transmitted.
work exists; flashes when data is being transmitted.
Page 13
2.3.2Ports
Network connection
This is the connection point on the dLAN 85 HSplus for connecting it to a
computer or another network device with the network cable (included).
Integrated electrical socket
If you connect additional network devices using a multiple socket, plug this
multiple socket into the electrical socket of the dLAN
grated mains filter eliminates any noise of connected devices and significantly improves data transmission in the home network.
Please note that all dLAN devices to be connected to your network are also connected to your household electrical wiring. A dLAN device switches to standby
mode after a short while if no active network device such as a computer is con
nected to the network port. In standby mode, the dLAN device cannot be
accessed via the power supply grid. As soon as the network device (e.g. compu
ter) connected to the network interface is switched on again, your dLAN device
can also be reached again via the electrical wiring.
2.4Connecting the dLAN 85 HSplus
This section describes how to connect your dLAN 85 HSplus to a computer or to
a network.
The firmware updater application can be found in the download section of our
website at www.devolo.com.
Initial use
|
85 HSplus. The inte-
13
-
-
햲 Use the included network cable to connect the dLAN 85 HSplus to the net-
work port of your running computer or other network device.
햳 Plug the dLAN 85 HSplus into a wall socket.
햴 Additional network devices that are connected via a multiple socket are con-
nected to the mains power supply by plugging the multiple socket into the
integrated electrical socket of the dLAN
햵 Once you have connected at least two dLAN 85 HSplus adapters as
described in 햲 and 햳, your dLAN
protect your dLAN network individually from unauthorised access, you
should first write down the security IDs of the dLAN devices. This unique
identifier of each dLAN device is located on the label on the housing. Then,
continue with the configuration of your network as described in Chapter 3,
'
Security in the dLAN'.
85 HSplus.
85 HSplus network has been set up. To
devolo dLAN 85 HSplus
|
|
Page 14
Initial use
14
|
2.5Software installation
2.5.1Software for Windows
Use the installation wizard folder to set up the following software components
for using the adapter with the Windows operating system:
The devolo dLAN Configuration Wizard lets you set up custom encryption
for your dLAN 200 AV network.
The devolo Informer finds dLAN adapters in a dLAN network and displays
information on the devices found.
To install the software, insert the included CD-ROM in the CD drive of your computer. If autoplay is installed on your computer, the installation will start automatically. Otherwise, open the folder with the Windows Explorer by rightclicking on Start and selecting Explorer from the context menu. Now, select
your CD-ROM drive. Double-click to start the installation wizard manually.
During the installation process, you will be given the choice of installing all software components ('Standard installation') or selecting individual ones ('Custom
installation').
To take full advantage of the functions of your device, we recommend installing
all of the applications.
You will be asked for permission to transfer anonymous performance data
related to your dLAN adapter to devolo. The data sent to devolo pertains only to
the performance values of your dLAN devices. The data is anonymised and will
be used exclusively for statistical purposes. By providing it, you can help us
improve our products. You can find the installed software applications in the
Start Programs devolo program group.
2.5.2Software for Mac OS X
The softwaremac folder contains the dLAN configuration software.
2.5.3Software for Linux
The software linux folder contains the dLAN configuration software.
devolo dLAN 85 HSplus
|
|
Page 15
3Security in the dLAN
To ensure the privacy of your dLAN network, data transfer via the household
electrical wiring is encrypted using the dLAN Configuration Wizard. Using
another utility program, devolo Informer, you can gain an overview of all the
reachable dLAN adapters in your own network.
3.1Encrypting the dLAN network
Using the dLAN Configuration Wizard, you can connect multiple devolo dLAN
adapters to each other to create a closed and secure home network. After suc
cessfully installing the devolo software, you can launch the dLAN Configuration
Wizard in the Start All Programs devolo program group.
Before beginning with this step, make a note of the security IDs of all existing
dLAN devices. This unique identifier of each dLAN device is located on the label
on the housing. It consists of 4 x 4 letters separated by dashes (e.g. ANJRKMOR-KSHT-QRUV). Ensure that all dLAN devices are connected to the electri
cal wiring and computers or other network components as appropriate.
If the dLAN Configuration Wizard cannot find a dLAN device in your network
even though one is plugged tightly into a power outlet, follow the instructions
for bandwidth optimisation in the Annex.
Configuring your dLANs using the dLAN Configuration Wizard consists of three
steps:
Security in the dLAN
|
15
-
-
햲 Scan for local adapter
After launching the wizard, it initially scans for a dLAN adapter connected
directly to your computer.
햳 Entering a network password
If your dLAN adapter has been found that is reachable directly from your computer, you can select a network password in the next step to be valid for this and
all other specified adapters in your personal home network.
You can choose between your own password, a random password and the
default password. To define your own password with a length of at least eight
characters, enter this into the Network password (min. 8 characters) text
field. Alternatively, you can have a randomly selected, highly secure password
assigned using the Random password button. Pressing the Default password
key resets the password of the dLAN adapter to the factory setting. Normally,
devolo dLAN 85 HSplus
|
|
Page 16
Security in the dLAN
16
|
the display of the password is hidden for security reasons. If you enable the
option Show characters, the current password is displayed in legible form in
the text field.
The factory default password is "HomePlug".
devolo dLAN 85 HSplus
|
Assigning a specific password to a single adapter will exclude it from the
remaining dLAN network.
햴 Configuring additional dLAN adapters (optional)
After setting up the local dLAN adapter, you can, if you want, assign the dLAN
password selected in Step 2 to other dLAN devices in your network in order to
form a closed dLAN network.
You will need the 16-character Security IDs of the various adapters from the
label on the housing. Enter the code without hyphens in the 4 text boxes and
confirm by clicking Define password. If a security ID is correct and the device
is reachable in the dLAN, the device is added to the list of already configured
adapters.
When launching the dLAN Configuration Wizard again after a successful initial
installation—when integrating a new adapter into the network, for example—
the application will remember devices and security IDs entered in previous
sessions if you have encrypted them with a personal network password or the
default password. In this case, you do not need to enter the devices again.
|
Page 17
Security in the dLAN
|
However, if the random password was used to encrypt the network during the
last installation, if you want to integrate a new adapter into the network, you
must re-register all previously entered dLAN adapters using the security ID.
Once you have entered the security IDs of your dLAN adapters, your dLAN network is complete. All computers and other network devices connected to the
adapters by cable should now be able to communicate with one another in the
network.
17
devolo dLAN 85 HSplus
|
|
Page 18
Security in the dLAN
18
|
3.2devolo Informer
devolo Informer can detect all available dLAN adapters in your home network
and display device information in an overview. After installing the devolo soft
ware, it can be found in the Start Programs devolo program group.
When the Informer is launched, it initially scans your home network for all avail
able dLAN devices. This may take a moment. All found adapters are listed with
their names and MAC addresses in the overview window. Their firmware ver
sions are also displayed, as are the transfer speeds of active connections
between the adapters. devolo Informer generally updates the list of found dLAN
devices automatically. If newly-added adapters do not appear in the window,
refresh the display with F5 or via the View menu.
Use the Device menu or the context menu that opens with a right-click on the
name of the displayed dLAN device to rename the adapter or launch the dLAN
Configuration Wizard.
-
-
-
devolo dLAN 85 HSplus
|
Multiple instances of devolo Informer installed in your network can be set to
exchange information about found dLAN adapters under View Options….
You may also specify whether information on the performance of your dLAN
adapters will be transferred to devolo here. The data sent to devolo pertains only
to the performance values of your dLAN devices. The data is anonymised and
will be used exclusively for statistical purposes. By providing it, you can help us
improve our products.
|
Page 19
4Appendix
4.1Bandwidth optimisation
To significantly improve the transmission capacity of the network, we recommend that you comply with the following "connection rules":
Plug the device directly into a wall socket. Avoid multiple sockets.
Appendix
|
19
devolo dLAN 85 HSplus
|
|
Page 20
20
Appendix
|
You should connect all additional network devices that are connected to a multiple socket to the mains power supply via the electrical socket integrated into
the dLAN
dLAN
the multiple socket into the electrical socket of the dLAN
85 HSplus. To take full advantage of the filter function of the
85 HSplus and to improve data transmission in the network, always plug
85 HSplus.
devolo dLAN 85 HSplus
|
If you need to power more devices, use a remote wall socket.
|
Page 21
4.2Important safety instructions
All safety and operating instructions should be read and understood before
using the device, and should be kept for future reference.
Never open the device. There are no user-serviceable parts inside the device.
Do not try to service this product yourself! Contact qualified technicians each
and every time your device needs maintenance. There is a risk of electric shock!
Use the device in a dry location only.
Always use the included network cable to connect the device.
Do not insert any objects into the openings of the device.
To disconnect the device from the power supply grid, pull the power plug.
Do not keep the device in direct sunlight.
Slots and openings on the case serve as ventilation. Never block or cover
them.
Never set up the device near a heater or radiator.
The device should be located only where sufficient ventilation can be
ensured.
Disconnect the device from the power supply grid before cleaning. Use a
moist towel to clean the device. Never use water, paint thinner, benzene,
alcohol or other strong cleaning agents when cleaning the device, as these
could damage the case.
Never use the device with a power supply that does not meet the specifica-
tions provided on the rating plate. If you do not know what type of power
supply you have at home, contact your dealer or energy supplier.
In the event of damage, disconnect the device from the power supply grid
and contact customer service. This applies, for example, if
the power cable or plug is damaged.
liquid has been spilled on the device or objects have fallen into the
device.
the device has been exposed to rain or water.
the device does not work, even though the operating instructions have
been followed properly.
the device’s case is damaged.
Appendix
|
21
devolo dLAN 85 HSplus
|
|
Page 22
Appendix
22
|
4.3Technical data
Standards
Protocols
Transmission speed
Transmission method
Modulation
Data path
Range
Security
LEDs
Socket / connector
Power output at integrated
socket
Device port
Power consumption
Power supply
Damping filter
Filter characteristics
Temperature
Weight
Dimensions
Ambient conditions
System requirements
Operating systems
Certifications
Ethernet specifications IEEE 802.3, IEEE 802.3x, IEEE 802.3u,
Auto MDI / X
backward-compatible to HomePlug standard 1.0
CSMA/CA
85 Mbps
asynchronous
OFDM - 84 carriers
Ethernet <-> power supply grid
up to 200m over power supply grid
encryption over household power supply grid
DES
pro
-Power
-Ethernet (Link/Act)
-dLAN (Link/Act/quality)
DE, NL, ES, PT, AT, SW, FI, NO:
Type F (CEE 7/4) / Type E + F (CEE 7/7 + CEE 7/4)
FR, BE: Type E (CEE 7/7) / Type E + F (CEE 7/7 + CEE 7/4)
UK: Type G (BS 1363) / Type G (BS 1363)
CH: Type J (SEV 1011) / Type J (SEV 1011)
230 V / 16 A maximum
Ethernet RJ45
5 W (max.), 3,3 W in standby
AC 100-240V 50/60Hz
2 – 30 MHz
-22 dB to -45 dB
Storage: -25°C – 70°C
Operation: 0°C – 40°C
240 g
130 x 66 x 42 mm (height x width x depth)
10–90% humidity (non-condensing)
Ethernet interface
®
XP
Windows
systems with TCP/IP support
CE-compliant in accordance with the technical requirements of all EU countries
and Switzerland:
EN 60950-1:2006
EN 55022:2006
EN 50412-2-1
, Windows® Vista
32-bit
, Linux®, Mac OS® X and all operating
32/64-bit
devolo dLAN 85 HSplus
|
|
Page 23
4.4Declaration of conformity
KONFORMITÄTSERKLÄRUNG
DECLARATION OF CONFORMITY
Hersteller: devolo AG
Manufacturer:
52070 Aachen
Produkt: devolo dLAN 85 HSplus
Product:
Typnummer: MT 2201, 2202, 2203, 2204
Type number:
Verwendungszweck: PLC zu Ethernet Adapter
Intended purpose: PLC to Ethernet Adapter
Richtlinie: EMV 2004/108/EG
Directive: EMC 2004/108/EC
Das Produkt entspricht den grundlegenden Anforderungen und Best im m ungen der
folgenden Normen und Methoden:
The product complies with the essential requirements and provisions of following standards and methods:
Sonnenweg 11
Appendix
|
23
Sicherheitsanforderungen: EN 60950-1:2006
Safety requirements:
Immunitätsanforderungen: EN 50412-2-1
Immunity requirements:
Emissionsanforderungen gestrahlt: EN 55022:2006
Emission requirements radiated:
Emissionsanforderungen leitungsgebunden: TCF vom Notified Body
Emission requirements conducted:
Diese Erklärung wird verantwortlich abgegeben durch:
This declaration is submitted by:
Aachen, 14. Januar 2009
Aachen, 14th January 2009
Vorstandsvorsitzender
CEO
TCF from Notified Body
Heiko Harbers
devolo dLAN 85 HSplus
|
|
Page 24
Appendix
24
|
4.5Warranty conditions
The devolo AG warranty is given to purchasers of devolo products in addition to the warranty conditions provided by law and in accordance with the following conditions:
1Warranty coverage
a) The warranty covers the equipment delivered and all its parts. Parts will, at devolo's sole dis-
cretion, be replaced or repaired free of charge if, despite proven proper handling and adherence to the operating instructions, these parts became defective due to fabrication and/or
material defects. Alternatively, devolo reserves the right to replace the defective product with
a comparable product with the same specifications and features. Operating manuals and possibly supplied software are excluded from the warranty.
b) Material and service charges shall be covered by devolo, but not shipping and handling costs
involved in transport from the buyer to the service station and/or to devolo.
c) Replaced parts become property of devolo.
d) devolo is authorized to carry out technical changes (e.g. firmware updates) beyond repair and
replacement of defective parts in order to bring the equipment up to the current technical state.
This does not result in any additional charge for the customer. A legal claim to this service does
not exist.
2Warranty period
The warranty period for this devolo product is three years. This period begins at the day of delivery
from the devolo dealer. Warranty services carried out by devolo do not result in an extension of the
warranty period nor do they initiate a new warranty period. The warranty period for installed
replacement parts ends with the warranty period of the device as a whole.
3Warranty procedure
a) If defects appear during the warranty period, the warranty claims must be made immediately,
at the latest within a period of 7 days.
b) In the case of any externally visible damage arising from transport (e.g. damage to the hous-
ing), the person carrying out the transportation and the sender should be informed immedi-
ately. On discovery of damage which is not externally visible, the transport company and the
sender are to be immediately informed in writing, at the latest within 3 days of delivery.
c) Transport to and from the location where the warranty claim is accepted and/or the repaired
device is exchanged, is at the purchaser's own risk and cost.
d) Warranty claims are only valid if a copy of the original purchase receipt is returned with the
device. devolo reserves the right to require the submission of the original purchase receipt.
4Suspension of the warranty
All warranty claims will be deemed invalid
a) if the label with the serial number has been removed from the device,
b) if the device is damaged or destroyed as a result of acts of nature or by environmental influ-
ences (moisture, electric shock, dust, etc.),
c) if the device was stored or operated under conditions not in compliance with the technical
specifications,
d) if the damage occurred due to incorrect handling, especially to non-observance of the system
description and the operating instructions,
e) if the device was opened, repaired or modified by persons not contracted by devolo,
f)if the device shows any kind of mechanical damage, or
g) if the warranty claim has not been reported in accordance with 3a) or 3b).
devolo dLAN 85 HSplus
|
|
Page 25
Appendix
|
5Operating mistakes
If it becomes apparent that the reported malfunction of the device has been caused by unsuitable
hardware, software, installation or operation, devolo reserves the right to charge the purchaser for
the resulting testing costs.
6Additional regulations
a) The above conditions define the complete scope of devolo's legal liability.
b) The warranty gives no entitlement to additional claims, such as any refund in full or in part.
Compensation claims, regardless of the legal basis, are excluded. This does not apply if e.g.
injury to persons or damage to private property are specifically covered by the product liability
law, or in cases of intentional act or culpable negligence.
c) Claims for compensation of lost profits, indirect or consequential detriments, are excluded.
d) devolo is not liable for lost data or retrieval of lost data in cases of slight and ordinary negli-
gence.
e) In the case that the intentional or culpable negligence of devolo employees has caused a loss
of data, devolo will be liable for those costs typical to the recovery of data where periodic secu-
rity data back-ups have been made.
f)The warranty is valid only for the first purchaser and is not transferable.
g) The court of jurisdiction is located in Aachen, Germany in the case that the purchaser is a mer-
chant. If the purchaser does not have a court of jurisdiction in the Federal Republic of Germany
or if he moves his domicile out of Germany after conclusion of the contract, devolo's court of
jurisdiction applies. This is also applicable if the purchaser's domicile is not known at the time
of institution of proceedings.
h) The law of the Federal Republic of Germany is applicable. The UN commercial law does not
apply to dealings between devolo and the purchaser.
25
devolo dLAN 85 HSplus
|
|
Page 26
26
|
Index
B
Bandwidth optimisation 19
C
CE conformity 20
Connecting the dLAN 85 HSplus 13
Control lamps (LEDs) 12