DENVER TR-54 User Manual

DENVER TR-54 BLACK MK2

www.facebook.com/denverelectronics

COMPONENTS

1.

Speaker

2. Carrying handle

3. Frequency turning

4. Frequency display

5. VOLUME ON/OFF
AM /FM BAND SWITCH

6.

7. Aux in jack

Telescopic antenna

8.

9. Battery compartment

Headphone jack

10.

11. AC Socket

INSERTING THE BATTERIES

1. Before inserting the batteries, the unit must be turned off and unplugged.

The power cable must be disconnected from the connector jack AC 230V, otherwise battery

operation is not possible.

2. Open the battery compartment (9) on the unit’s bottom side.

3. Insert 4 batteries, type 1.5V AA.

Heed the correct polarity of all batteries as indicated in the battery compartment.

4. Close the battery compartment. The unit is ready for use.

OPERATING THE RADIO

1. Set the frequency band with the frequency band switch AM FM (3) .

When using (FM) frequency band, pull out the telescopic antenna

Reception can be improved by turning the radio and adjusting the antenna.

(8) completely.

ENG 1