Denver DAB-38 Service Manual
denver-electronics.com
Instruction manual
DAB+/DAB FM Radio
DENVER DAB-38
COPYRIGHT DENVER ELECTRONICS A/S
www.denver-electronics.com
www.facebook.com/denverelectronics
ENG-1
IMPORTANT SAFETY INFORMATION
CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within this unit.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Do not install or operate near any heat sources such as
radiators, stoves, or other apparatus that produce heat.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
is required when the apparatus has been damaged
in any way, such as the power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
not expose this product to rain or moisture. The product
must not be exposed to dripping and splashing and no
be placed on the product.
on the product.
Batteries (a battery pack or installed batteries) shall not
like.
by the manufacturer could void the user’s authority to
operate this device.
Caution: Usage of controls or adjustments or performance
in hazardous exposure.
To prevent possible hearing damage, do not
listen at high volumes for long periods.
IMPORTANT
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communication. However, this is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on,the user
is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit dierent from that to wihch the receiver is connected.•
Consult the dealer or an experienced radio/TV technician for help. •
ELECTRICAL INFORMATION
Use this appliance only with the supplied AC Adap
ter. Using non-approved power supplies will void the warranty.
ENG-2
PRELIMINARIES
LOCATION
Place the unit on dry stable surface away from heat and damp and where it is unlikely to fall or be knocked over.
GETTING STARTED
DAB/FM AERIAL
Before using your radio for DAB or FM reception, always fully extend the telescopic aerial.
The telescopic aerial has a swivel base to enable it to be adjusted to duerent positions for the clearest sound.
CONTROLS AND CONNECTIONS
FRONT VIEW
Handle1.
Select/Station control2.
Standby button3.
Info/Menu button4.
Preset button5.
Mode button6.
Display7.
Scan button8.
Alarm button9.
Snooze/Sleep button10.
Back button11.
Volume control12.
Select
Station
2
Info/Menu
345
Mode
Preset
6 7
1
Back
Scan
Alarm
Snooze/Sleep
Volume
11
8 9
10
12
BACK VIEW
DAB/FM Aerial1.
DC In jack2.
Headphone jack3.
Aux In jack4.
Battery cover
5.
(Batteries not included)
DC 6V IN
1
OPEN
AUX IN
2
4
3
OPEN
5
ENG-3
POWER CONTROL
STANDBY CONTROL
Switching the radio on:
Press the •
The radio will re-tune to the last station playing.
Setting the radio to Standby:
Press the •
The time and date will be displayed.
NOTE:- The button functions as a Power ON/ O button during battery operation - the display will switch
o completely when set to Standby and Alarm and Sleep function are disabled.
INITIAL SCAN
When your radio is switched on for the rst time it will scan all usable stations and store them alphanumerically 1 Radio, 2 Radio, AA Radio, AB Radio... The initial scan will take a few minutes. After the scan, the number of stations
found will be displayed, and the radio will play the rst station in the sequence.
Note: If no stations are found, switch the radio o and move it to a location with a stronger signal. When you
switch the radio back on it will automatically repeat the scan process.
button to switch on the radio.
button to set the radio to Standby.
SELECTING A DAB STATION
After scanning, the stations are stored in an alphanumeric
station list.
To select another station:
Turn the • Select/Station control to browse the station
list.
Press the • Select/Station control to select the station
displayed.
The radio will re-tune to the new station.
The display will show the station name and DLS scrolling
information text.
20:45
DAB
Station list
<BBC R2 >
Station list
Station name
DAB
20:45
BBC R2
.scrolling text.
Information text
ENG-4
Loading...