Denver DAB-34 Owner's Manual

SIZE:105 X148mm

DAB-34

DAB+/DAB band III and FM digital radio

DAB+/DAB Band III und digitales UKW-Radio

DAB+/DAB bånd III og FM digital radio

DAB+/DAB band III and FM-digitalradio

DAB +/DAB Band III en FM digitale radio

Radio cyfrowe DAB+/DAB pasmo III i FM

DAB+/DAB-kaista III ja digitaalinen FM-radio

Banda DAB+/DAB III y radio digital FM

Radio FM numérique avec bande III DAB+/DAB

Radio digitale banda DAB+/DAB III ed FM

Rádio digital FM e DAB+/DAB banda III

DAB+/DAB pojas III i FM digitalni radio

DAB Radio Signal

Please notice that DAB signal can be weaken MUCH depending on the type of
building you are living in. (fx. It can be hard to catch proper signal when being in
a concrete building.)

Signal can also be different in different areas of the country. Please check your
local transmitter to get the best signal in your area.

Vær opmærksom på at det kan påvirke DAB signalet MEGET hvilken type
bygning man bor i. Det kan f.eks. være svært at få et ordentligt signal hvis man
bor i beton byggeri.

Der er også forskel på hvor god dækningen er i forskellige områder. Tjek nyeste
dækningskort på www.dabradio.dk under ”hvad er digital radio”.

DENVER DAB-34 DENVER DAB-34

EN-1 EN-2

Front view

Rear view

F.1

F.2

Scanning . . . 0Welcome !

Digital Radio

STANDBY MODE SELECT PRESET MENU/INFO ALARM/SNOOZE VOLUMESEARCH

1 1

2 3 4 5 7 8 9 106

1. SPEAKER

2. SEARCH CONTROL

3. STANDBY BUTTON

4. MODE BUTTON

5. SELECT BUTTON

6. LCD DISPLAY

7. PRESET BUTTON

8. MENU/INFO BUTTON

9. ALARM/SNOOZE BUTTON

10. VOLUME CONTROL

11. BATTERY DOOR

12. ROD ANTENNA

13. RATING LABEL

14. HEADPHONE JACK

15. DC INPUT SOCKET

16. AC/DC ADAPTOR

DC 6V

AUX IN

11 12 13 14 15

SWITCHING YOUR RADIO ON FOR THE FIRST TIME

AC Operation

1. Insert the DC power jack of AC/DC adaptor to the DC input socket located
at the rear of the radio.

2. Plug the AC/DC Adaptor to the AC mains outlet.

3. Press the STANDBY button to turn the radio on.

DC (battery) operation

1. Ensure the AC/DC adaptor is disconnected from the radio and AC mains.

2. Installed the batteries (4×1.5V UM3/AA battery) into the battery
compartment.

3. Press the STANDBY button to turn the radio on.

Menus:

Press and hold MENU/INFO button to enter into the “MENU”. Rotate SEARCH
Control to navigate the desire option, then press SELECT button to conrm.

BASIC OPERATION - GETTING STARTED

1. Press the STANDBY button to turn the unit on, it will automatically enter
into the DAB mode and perform auto scan function, During the scan the
display show “Scanning…” together with a slide bar that indicates the
progress of the scan and the amount of stations that have been found so
far. (F.2)

2. Once the scan has nished, the radio will select the rst alphanumerically
found station. You can now rotate the SEARCH control to explore the
found stations followed by pressing the SELECT button to select listening
to the stations.

AB Auto Scan

The full scan will search for the entire DAB Band III channels. After the scan has
nished, the rst alphanumerically found stations will be automatically selected.