Denver CRP-617 Instruction Manual

CRP-617

I N S T R U C T I O N M A N U A L
BEDIE N UN G SA N LE I TU N G

www.denver-electronics.com

www.facebook.com/denverelectronics

English

1. ALARM 1 ON / OFF BUTTON

2. ALARM SET BUTTON

3. << / YEAR – MONTH – DAY BUTTON

4. >> / DST BUTTON

5. MODE BUTTON

6. ALARM 2 ON / OFF BUTTON

7. VOLUME KNOB

8. TUNING KNOB

9. LED DISPLAY

10. SPEAKER

11. AM/FM BAND BUTTON

12. ON / OFF BUTTON

13. SNOOZE / SLEEP / NAP BUTTON

14. PRJECTION TIME 180° FLIP BUTTON

15. PROJECTION ON/OFF BUTTON

16. ALARM RADIO / BUZZER SWITCH

17. PROJECTION UNIT

18. FOCUS ADJUSTMENT FOR PROJECTION UNIT

19. RESET BUTTON

20. DISPLAY LIGHT AUTO OFF / HIGH / LOW DIMMER

21. AC POWER CORD

22. FM ANTENNA

23. BATTERY DOOR

24. RATING LABEL (BOTTOM OF UNIT)

POWER CONNECTION
Plug the AC power cord to a household outlet AC source. This unit
is equipped with a battery back up system, it requires a 3V CR2032
at lithium battery (not included). Insert the battery in the battery
compartment, making certain that the positive and negative (+ and -)
battery terminals are attached to the corresponding terminals on the
plate in the battery compartment. If an AC power failure occurs, the
clock automatically switches to the battery power supply, the clock and
timer memory continue running. When the AC power resumes, the clock
switches back to AC again.

GETTING STARTED
Press the reset button (19) locates on the back of unit after AC plug in.

- The unit will display full segment for 2 seconds, then it will enter the
normal mode.

1. TIME AND CALENDAR MANUAL SETTING
A. Setting Time and Calendar – Press mode set button (5) in normal
mode and keep depress over 2 seconds to enter time set mode, after
enter the setting mode, press mode set button (5) to change the
mode cycle as follows :

Normal → Year → Month → Day → 12/24 H → RTC Hour → RTC
Min → Normal

Action (during data adjustment) :

- Press <</Year-Month-Day button (3) to adjust data backward.

- Press >>/DST button (4) to adjust data forward.

- Keep depress << or >> button for 2 seconds to enable auto forward.

B. Setting Alarm 1 and Alarm 2 – Press alarm set button (2) during
normal mode and keep depress over 2 seconds to enter alarm
set mode, after enter the setting mode, press alarm set button (2) to

change the mode cycle as follows :

Normal → AL 1 Hour → AL 1 Min → AL 1 Weekday Alarm → AL 2
Hour → AL 2 Min → AL 2 Weekday alarm → Normal

Select alarm weekday mode as follows
1-5 Monday to Friday
1-7 Whole week
6-7 Saturday & Sunday
1-1 One day of week

Action (during data adjustment) :

- Press << / Year – Month – Day button (3) to adjust data backward.

- Press >> / DST button (4) to adjust data forward.

- Keep depress << or >> button for 2 seconds to enable auto forward.

2. SETTING ALARM OUTPUT AND ALARM ON/OFF
A. Change the alarm output
Using the Alarm radio / buzzer switch (16) select to radio position to
select wake up by radio, select to buzzer position to select wake up
by buzzer.
Select the Display light auto off / high / low dimmer (20) to the auto
off mode, alarm wake up the display is auto turn on.
Press alarm 1 on / off button (1) to toggle on and off alarm output
function.
Press alarm 2 on / off button (6) to toggle on and off alarm output
function.

3. ALARM DURATION AND SNOOZE FUNCTION
Alarm Duration – Buzzer alarm or Radio alarm will continue output
for 30 minutes if no key press, then it will stop automatically and wait
for same alarm time on next day.

Action for Snooze :

- During alarming, press Snooze button (13) will enable snooze
function, buzzer alarm or radio alarm will stop.

- Snooze interval is 9 minutes (not include second offset)

- Snooze will continue unless press on/off button (12) to alarm off of
buzzer alarm or radio alarm stop automatically after 30 minutes.

- Select the display light auto off / high / low dimmer button (20) to
the auto off mode, during alarming display auto turn on, press
snooze / sleep /nap button (13) will enable snooze function, buzzer
alarm or radio / display will stop & off.

4. CHANGE DISPLAY CONTENT
Press << / Year-Month-Day button (3) during normal can switch to
display Year/Month/Day, after 5 seconds timeout and return back to
display time.

5. SLEEP FUNCTION
During radio on mode, press Snooze / Sleep / Nap button (13) to turn
on sleep mode, the sleep time will keep ashing by 10 seconds,
within 10 seconds and press sleep button can change the duration
from 90 min – 15 min. Press on/off button (12) to cancel sleep
function.

6. NAP timer function (countdown timer)
During radio off mode, press snooze / sleep / NAP button (13) to turn
on NAP mode, the NAP time will keep ashing by 10 seconds, within
10 seconds and press snooze / sleep / NAP (13) button can change
the duration from 90 min – 10 min. The alarm buzzer will sound for
30 min and then shut off automatically. To stop the alarm buzzer,
press the on/off button (12).
Press the snooze / sleep / NAP (13) button has no effect during
alarm operation. Press on/off button (12) to cancel NAP function.

7. The radio OFF mode, select the display light Auto off / low / high
dimmer (20) to the on/off mode, the LED display will automatically off
in 15 seconds.

- Press any key button to turn the display on.