Q1: What is the power output of the amplifier PMA-1060?
A1: The rating of the PMA-1060 output power is rated at 105 W+105W for an 8 ohm load.
Q2: Is it possible to fit moving-coil cartridge into the PMA-1060?
A2: This is so, in so far as the total sensitivity of a MC cartridge is 200µV or above. Then, yes, the PMA-1060 can accept such cartridges.
Q3: What are the dimensions of the PMA-860 amplifier?
A3: The dimensions for the PMA-860 are 430 mm width by 160 mm height by 390 mm depth
Q4: Is there a headphone jack in the PMA-1060 and PMA-860 models?
A4: Yes, PMA-1060 and PMA-860 amplifiers have a standard headphone jack
Q5: What are the steps to connect my speakers to the PMA-1060?
A5: On the rear panel speaker output terminals labelled A and B can be used to connect your speakers.
Q6: Which power outlets are enabled in the PMA-1060 model?
A6: The PMA-1060 provides unswitched and switched AC sockets to accommodate other audio devices.
Q7: Is it feasible to adjust treble and bass levels on the amplifier?
A7: So, yes, the PMA-1060 has control adjustments for bass and treble levels.