Denon PMA-757, PMA-777 Service Manual
Specifications and Main Features
- Model: PMA-777
- Rated Output Power: 100 watts RMS per channel (8 Ohm load) minimum, 120 W + 120 W (4 Ohm load).
- Total Harmonic Distortion (THD): 0.003% approximately spanning between 20 kHz to 20 Hz when tested with 3db output at 8 ohms.
- Input Sensitivity: 150 mV
- Input Impedance: 47 k ohm
- Output Impedance: 0.08 ohm (1 kHz)
- Speaker Load: 4 ~ 16 ohm
- Peak Output: 30 W + 30 W (IEC standards).
- Equalizer Amplifier Ouput: Max 12 V (47 k ohm load), rated output 150 mV
- SN Ratio for PHONO MM: 87 dB, for MC: 70 dB.
- Dimension of device: 470x136x413mm.
Frequently Asked Questions
- Q: PMA-777 caters and sustains which type of load?
A: The PMA-777 caters 4 — 16 ohm load for the speakers.
- Q: For the US version what is the total harmonic distortion at its rated output?
A: The total harmonic distortion for the US version is 0.02 % (20 Hz - 20 kHz on 8 ohm Load at rated output).
- Q: Can you tell me how much power the unit uses?
A: The US version has a power consumption of 245 W while the IEC version has a power consumption of 250 W.
- Q: What is the weight of the PMA-777 with the wood board and what is its weight without it?
A: The PMA-777 weighs 12.5 kg (27 lbs 9 oz) with the wood board and 11.5 kg (25 lbs 6 oz) without it.
- Q: Am I able to connect headphones to this amplifier?
A: Yes, when using PMA-777 it is possible to connect headphones through the headphone jack.
User Manual
Loading...