Specifications and Main Features
- Integrated Hi-Fi Stereo Amplifier Model: PMA-320
- Power Output: 60W + additional 60W with a total harmonic distortion of only 05%
- Frequency response: between 20 Hz to 20 kHz, 4 Ohms rated output
- Total Harmonic Distortion (T.H.D.): 0.05 per cent under 8-Ohm rated output
- Sensitivity/Impedance Input : 150mV and 30kOhm
- Phono Input: MM-2.5mV/47k Ohm, MC-250uV/100Ohm
- Signal to Noise ratio:
- Phono (MM): at 5mV input-86 dB
- Phono (MC):at 0.5mV input–68 dB
- CD, Tuner, Auxiliary:98 dB with inputs shorted
- Tone control:
- Bass: "+8 dB at 10 Hz"
- Treble: “+8 dB at 10 kHz”
- Power consumption:
- 2.6A for USA and Canada models
- 160W as per IEC standards
- 118W for high voltage versions
- Dimensions for the various models: 434mm W by 120 mm H by 280 mm D
- Weight: equivalent to 5.6kg and 12 lbs 6oz
Frequently Asked Questions
Q: PMA-320 how much is the power output?
A: There is a Total Harmonic Distortion of 0.05 at power output of 60 Watts + 60 Watts
Q: PMA-320 phono inputs types supported are ?
A: PMA 320 MM 2.5 m V/47 k Ohm, MC 250uV/100 Ohm.
Q: What is approximately the frequency response range of this amplifier?
A: It ranges from 20 Hz up to 20 kHz at the 4 Ohm setting.
Q: Pointing toward the different inputs, what would be the signal to noise ratio for those different inputs?
A:
- Phono (MM): 86 dB
- Phono (MC): 68 dB
- CD, Tuner, Auxiliary: 98 dB (shorted inputs)
Q: The bass and the treble adjustments can be done on the PMA-320, how do I implement those adjustments?
A: The bass can be modified with the aid of a control which has +8 dB at 10hz and the treble can be shaped for +8 dB at 10 kHz.
User Manual
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Loading...