QUICK
GUIDE
Denon
MC6000MK
-
START
Installation and Setup
The Denon MC6000MK2 is a class compliant USB plug and play device for
Mac, however requires drivers for Windows. You will nd these on the installation
CD provided with your Denon MC6000MK2.
NOTE: Please ensure you have the latest available drivers AND rmware updates,
which may be required in order to be compatible with Serato DJ. Please go to
http://serato.com/dj/support
1. Download and install the latest version of Serato DJ from http://serato.com/
dj/downloads
2. After installing drivers, connect your Denon MC6000MK2 to an available
USB Port.
3. Open Serato DJ.
4. The Denon MC6000MK2 platters require a few touches by the user in
order to calibrate to their environment. After power up and start of Serato
DJ, tap the platters a few times to set their sensitivity.
Serato DJ Activation
To nd out how to activate Serato DJ by either starting your free 14 day trial, or
purchasing a license for Serato DJ, click here for the most up to date information.
1 2 3 4 5 6 7 8 9 10 11 1213 14 15 16
17 18 19 20 21 22 23 24 25 26 27 28
# Denon MC6000MK2 Control
1 DV 12V Power input
2 Controller ON/OFF
3 USB 2.0 Input
4 USB Audio line select switch
5 Balanced Booth Output L/R
6 Balanced Master XLR Output
L/R
7 Mono/Stereo switch
8 Unbalanced RCA Master Output
9 Line 4 L/R Input
10 Phono/Line Switch
11 Line 3 L/R Input
12 Phono/Line Switch
13 Line 2 L/R Input
14 Line 1 L/R Input
15 MIC 2 TRS Input
16 MIC 1 XLR Input
17 Headphones Input
18 Headphone volume
19 Cue/Master volume
20 Split Cue switch
21 MIC 1 EQ LOW/MID/HI
22 MIC 2 EQ LOW/MID/HI
23 MIC Echo
24 Fader Assignment CH3 L/Thur/R
25 Fader Assignment CH1 L/Thur/R
26 X Fader Curve Dial
27 Fader Assignment CH 2 L/
Thur/R
28 Fader Assignment CH 4 L/
Thur/R
Controller
321 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
52
51
50
49
48
47
46
45
44
43
19
20
21
22
23
24
25
26
27
30 2829313233343536373839404142
NOTE: The SHIFT button is used with other buttons that have shift modier functions.
# Denon MC6000MK2
Control
1 CH ASSIGN Applies FX to selected channels
2 FX KNOBS Adjust Slot 1-3 FX Parameter Turn Knob 1 (Select Effect in Slot 1),
3 FX BUTTONS (P1,2,3) Slot 1-3 Effect On/Off Button 1 (Select Effect in Slot 1), Button
4 TAP Tap to set desired BPM/hold to reset
5 BEATS Turn to adjust Beats Multiplier setting/ push down to reset to 1/1
6 EQ (knobs) Adjust HI, MID and LOW
7 INPUT SELECT Toggles between available Line channels LN3,LN1,LN2,LN4 and PC mode
8 CH LEVEL Toggles focus between library, crates and open panels
9 INPUT SELECT Toggles between available Line channel LN1 and PC mode
10 LOAD Load selected track to Deck 1 (Press twice to Instant Double)
11 FILTER LP/HP lter combo adjust for channel 1
12 FILTER ON Turn lter combo on/off for channel 1
13 BROWSER Browses through currently focused area (library/crates/open panels) Click to
move between library and crates
14 FILTER ON Turn lter combo on/off for channel 2
15 LOAD Load selected track to Deck 2 (Press twice to Instant Double)
16 FWD Toggles focus between library, crates and open panels
17 IN Set loop in point (Loop not active)/Adjust loop in point (Loop active)
18 OUT Set loop out point (Loop in point set)/Adjust loop out point (Loop active)
19 MASTER LEVEL Adjusts the master output’s audio level
Function Shift Function
Turn Knob 2 (Select Effect in Slot 2),
Turn Knob 3 (Select Effect in Slot 1)
2 (Select Effect in Slot 2), Button 3
(Select Effect in Slot 1)
NOTE: The SHIFT button is used with other buttons that have shift modier functions.
# Denon MC6000MK2
Control
20 AUTO LOOP Activates Auto Loop
21 - Halve Auto Loop length
22 BOOTH LEVEL Adjust Booth Output
23 + Double Auto Loop Length
24 HOT CUE/SAMPLE Set/Trigger Cue (1,2,3,4) / Sample trigger (1,2,3,4) Delete Cue 1,2,3,4/ Shift + Sample + 1,2,3,4
25 BOOTH ASSIGN Set booth assign to channel output 1,2,3,4 or master output
26 CENSOR/SLIP Censors the playing track while pressed Enables Slip mode.
27 SHIFT SHIFT button is used with other buttons that have shift modier functions
28 CHANNEL FADERS Adjusts the Channel Output
29 PANEL/VIEW/AREA/LIST Switches through available view and display options. See Display Options
table for more information
30 VIDEO LED Links crossfader to video channels only
31 X-F LINK Links the crossfader to Serato Video and/or audio channels Scrolls through Video transitions
32 LED METER Monitors the audio levels of the assigned Output (see LED METER
ASSIGN for more detail)
33 CROSSFADER Crossfades the output sound between Deck 1 & 2
34 LED METER ASSIGN LED meter assigning for CH1/2, CH3/4 or MASTER outputs
35 AUDIO LED Links crossfader to audio channels only
36 BACK Toggles focus between library, crates and open panels
37 CUE Cue selected channel in headphones
38 PITCH BEND -/+ Press or hold down either of these buttons to temporarily adjust the
track’s playback speed. When released, the track playback will return to
the speed designated by the PITCH FADER.
Function Shift Function
stops sample playback
Fast Forward/Rewind
NOTE: The SHIFT button is used with other buttons that have shift modier functions.
# Denon MC6000MK2
Control
39 VINYL Toggles between Vinyl/Jog Modes
40 PLAY/PAUSE Play/Pause track
41 CUE Add or Jump to Temporary Cue
42 SYNC Sync On Sync Off (Press twice to return to Absolute
43 PITCH FADER Adjust Pitch When in Sync mode, used to disable the Pitch
44 PLATTER Adjust/Scratch or Jog Search
45 KEYLOCK Enable Keylock Cycle through available Tempo Range
46 ECHO ON 1/2 Adjust Mic Echo Wet/Dry for Mic Channels
47 DECK LAYER ASSIGN Swap deck layer
48 DUCKING Lowers master signal when pressed down/will stop ducking on release Routes Mic input to the Booth output
49 MIC ON 1/2 Turn on/off MIC channel 1 or 2
50 HOT CUE MODE Activates Hot Cue (1-4)
51 MIC 2 LEVEL KNOB Turn to adjust MIC 2 level
52 MIC 1 LEVEL KNOB Turn to adjust MIC 1 level
Function Shift Function
Pitch when in Relative Mode)
Fader temporarily and change the zero position
Display Options
Denon MC6000MK2
Control
Panel Cycles through REC, FX and SP-6 panels
View Cycles through the available deck views
Manual Loop Mode
Denon MC6000MK2
Control
AUTO LOOP Start Auto Loop
- Halve Auto Loop length
+ Double Auto Loop length
Auto Loop Mode
Area Navigates through the Files, Browse, Prepare and
History panels
List Switches between Simple List and Album Art list
library view modes
Looping
You have the choice of Auto or Manual looping within Serato DJ with the
Denon MC6000MK2.
Denon MC6000MK2
Control
IN Set loop in point (Loop not active)
IN Edit start of loop point with platter (Loop active)
OUT Set end of loop point (If Loop in point set)
OUT Edit end of loop point (Loop active)
AUTO LOOP Exit Manual Loop
NOTE: The best way to edit the start and end points of a manual loop is with
the jog wheel/platter on your Denon MC6000MK2.
Manual Loop Mode
DJ-FX
The DJ-FX in Serato DJ are powered by iZotope™. Click the FX tab
to open the FX panel. Select either 1, 2, 3, 4 or M to assign the selected effect
bank to a deck or Master Output.
There are two available modes in the DJ-FX. Single FX Mode allows you to
select one effect per FX bank, and has multiple parameters that can be
adjusted. Multi FX Mode allows you to select up to three effects per FX bank,
and adjust only one parameter, the FX Depth. The same effects available in
Single FX mode are available in Multi FX mode, as well some additional presets.
You can select between the two FX modes by clicking either the Single FX
mode button or Multi FX mode button
MC6000MK2
Control
FX P1
BUTTON
FX P2
BUTTON
FX P3
BUTTON
FX KNOBS Adjust FX
Single FX Mode Multi FX Mode Shift
Effect On/Off Slot 1 Effect On/
Off
Effect Modier 1
On/Off
Effect Modier 2
On/Off
Parameter (1-3)
Slot 2 Effect On/
Off
Slot 3 Effect On/
Off
Adjust FX
Parameter (1-3)
Slot 1 Select
Effect
Slot 2 Select
Effect
Slot 3 Select
Effect
Adjust Beats
Multiplier
Serato Video
Serato Video is an Expansion Pack for Serato Software which adds the ability to
playback and mix video les, use effects and fader transitions with your Serato
DJ hardware, an additional MIDI controller or your mouse/keyboard.
For more information on Serato Video go to http://serato.com/video
When using the MC6000MK2 with Serato Video, the following functions apply:
Denon MC6000MK2
Control
Video FX Knob 1 Highpass/Lowpass lter Adjust Video FX 1
Video FX Knob 2 Highpass/Lowpass lter Adjust Video FX 2
Video FX ON button N/A Turns Video FX 1 On
Video FX ON button N/A Turns Video FX 2 On
X-F Link Button Links crossfader to
Serato Video
The MC6000MK2 also has a dedicated Video mode. To boot the unit up in
dedicated Video mode hold [SHIFT+ VIDEO ON (x2)] at the same time, then turn
on the MC6000MK2. Once the unit is turned on, press the BROWSER knob and
the controller will now be in Video mode.
In the dedicated Video mode, the following functions control Serato Video:
Denon MC6000MK2 Control Function
Function Shift
Wet/Dry
Wet/Dry
Toggles Video
transition
Video FX ON button Switch to Filter Mode
Video FX ON button Switch to Video Mode
Pressing SHIFT will exit this mode and return to the original controller function.
MIDI
The MIDI control feature in Serato DJ provides the ability to map Serato DJ
software functions to MIDI controller functions such as keyboards, triggers,
sliders, and knobs. Integrating MIDI controllers into your Serato DJ setup can
improve live performance usability, such as hitting pads on a MIDI controller to
trigger Loops and Cue Points.
For more information download the Serato DJ manual by going to http://serato.
com/dj/downloads
NOTE: You can not MIDI Map your Denon MC6000MK2, you will need to connect an additional MIDI controller to use these MIDI functions.
Video FX Knob 1 Adjust Video FX parameter for Left Deck
Video FX Knob 2 Adjust Video FX parameter for Right Deck
Using the Tool Tips
Click on the icon to enable Tool Tips. This is located in next to the setup
button in the top right hand corner of the screen. Tool Tips provide a handy
way to learn the various features of Serato DJ.
Move the mouse over a section of the screen to bring up a context sensitive
tool tip. Holding the mouse over the button with Tool Tips turned on will
show you a list of all keyboard shortcuts.
For more information about how to use Serato DJ, please go to our website
www.serato.com or refer to the Serato DJ Software Manual.
For more information on your controller, please refer to the hardware manual.
For further help, please contact support@serato.com or go to www.serato.com/
dj/support
Loading...