Model Designation: DCD-580
Channels: 2 channels
Frequency Response: 2 Hz – 20,000 Hz 1
Dynamic Range: 96 dB
Signal-to-Noise Ratio: 103 dB
Total Harmonic Distortion: 0.004% (1 kHz)
Channel Separation: 98 dB (1 kHz)
Jitter: Undetectable (<0.001%)
Output Voltage: 2.0V
Power Supply: 50/60Hz as marked on the model
Power Consumption: 10W
Dimensions: 434 (W) x 105 (H) x 280 (D) mm
Weight: 3.8kg
Supported Disc Format: Compact Disc
Remote Control: RC-220
Remote Control Power Supply: 3V DC; uses 2 R6P batteries
Remote Control Dimensions: 48 (W) x 177 (H) x 18 (D) mm
Remote Control Weight: 100 g (including batteries)
Q1: What types of CDs can the DCD-580 play?
A1: This unit can playback normal 12 cm CDs and 8 cm CD singles without an adapter.
Q2: What output connections does the DCD-580 have?
A2: The unit has line out for connection of amplifiers.
Q3: Is the remote control still useful while I am using the CD Player?
A3: Absolutely, remote control enables one to conduct a variety of functions on the CD player from a distance.
Q4: Is it possible to replay certain tracks on a Wishlist if so what is the procedure?
A4: Indeed, it is quite possible to wish list up to 20 tracks and play them at your desired times.
Q5: Are there risks or any safety measures I have to take while using my device?
A5: A few yeah- do not let moisture gain onto the system, Please do not try opening the device and make sure the power cable is not damaged.
Q6 Am I able to play a CD even if it cannot be read? Or what do I do if a CD cannot be read?
A6: Ensure that the CD is clean and inserted properly, while making sure to check the oxide display for any errors.
Q7: How do I alter the volume during the use of headphones?
A7: Employ the volume control of the headphone, on the CD player until the desired volume has been reached.
Q8: What are some of the additional playback options that I can access through the DCD-580?
A8: If features such as A-B repeat, programmed playback and mute between tracks is included then sure the DCD-580 will cater to these needs.