Denon AVR-F100 Service Manual
...
Denon Service Manual
Specifications and Main Features
- Audio Section
- Power amplifier:
- 20W + 20W Rated Output (6 ohms, 1kHz frequency with 0.08% Total harmonic distortion)
- 25W + 25W Rated Output (6 ohms, 1kHz frequency with 10% Total harmonic distortion)
- Output Terminals: 6 to 16ohm
- Analog:
- PRE OUT - LINE input
- Input Sensitivity/Input impedance: 110mV/47kΩ
- Bandwidth: 10Hz~50kHz: +1, -3dB
- Signal-to-noise ratio: 90dB (IHF-A weighted)
- Video Section
- RCA: (Video)
- Level and impedance Input/output: 1Vp-p, 75 Ω
- Frequency response: 5Hz~10MHz — +1, -3dB
- Tuner Section
- FM reception frequency:87.50MHz~108.00MHz
- AM reception frequency: 522KHz~1611KHz
- Sensitivity: stereo 1.0 pV (11.2dBf) with FM; 26 uV AM
- General
- Voltage and Frequency: AC230V, 50Hz
- Wattage: 60W
- Dimension maximum external: 270 (W) x 84 (H) x 277 (D) mm
- Weight: 4,2 kg
- REMOTE CONTROL UNIT (RC-889)
- R6P/AA Type batteries (two batteries)
- 54mm by 172mm by 27.2 with weights of 100 grams (including batteries)
---
Frequently Asked Questions
- Q: Please tell us down the rated output for the AVR-F100?
- A: Rated output equals 20W+20W at 6Ω (1KHz 0.08% T.H.D) and 25W + 25W at 6Ω 1KHz 10% T.H.D.
- Q: Output terminals contain different impedances, what is the impedance range on the said terminals?
- A: Output terminals provide for an impedance ranging from 6 to 16 ohm.
- Q: What is the frequency response of the analogue section?
- A: For the analogue section the frequency can range from 10kHz through to 50, with deviation of ±1, -3 db.
- Q: Physical dimensions of AVR-F100
- A: Maximum physical dimensions are set at 270mm width, 84mm height, 277mm depth.
- Q: What type of batteries do you need for the remote control unit?
- A: For remote control units two R6P/ AA batteries are needed.
Loading...