Denon AVR-991 User Manual

AV SURROUND RECEIVER

ENGLISH

vpage 83 :

Addition

AVR-991

Addendum Sheet

Thank you for purchasing DENON’s product. When you operate the unit, please
read the owner’s manual and this sheet.

vpage 55 :

Addition

Party mode function

A function has been added when playing back in
party mode that enables attendees to perform
controls such as selecting songs etc.
Also, DENON products that are connected to the
network can control each other.

vpage 77 :

Manual Setup

The “Network Setup” – “Other” menu was
changed.

MANUAL SETUP
NETWORK SETUP

Change

GNETWORK SETUPH

n Participating in the party mode as

an attendee

Press PARTY.

1

“Enter Party Mode?” is displayed.

• An error message is displayed when you are not
connected to a network.

Press o p to select “Yes”, then press

2

ENTER.

When you start the party mode, the monitor
of the attendee (child) displays the network
menu screen for the organizer (parent).

Press uio p and ENTER to select

3

the desired track.

DENON:[ AVR-991]

Favorit es

Interne t Radio
Media S erver

The party mode function can only be used on a
combination of DENON devices that are equipped
with the party mode function.

[1/3]

PARTY ATTENDEE

Net work Con nect ing

Oth er

Rha psod y Acc ount
Nap ster Acco unt
Net work Info rmatio n

MANUAL SETUP
OTHER

Net work Sta ndby
PC Lang uage
Fri endl y Nam e Edit
Par ty M ode

Net work Stat us

Upd ate Notif icatio n
Upg rade Noti ficati on

MANUAL SETUP
OTHER

Net work Sta ndby
PC Lang uage
Fri endl y Nam e Edit
Par ty M ode

Zon e Ma nagem ent

Upd ate Notif icatio n
Upg rade Noti ficati on

GOTHERH

NETWORK SETUP

Before change

NETWORK SETUP

After change

Zone management function

DENON products that are connected to the network
can control.
The “Device Control” item was added to the
“Network Setup” – “Other” – “Zone Management”
menu.
With “Device Control”, the network functions
(Internet radio when the input source is NET/
USB etc) of the device selected in step 2 can be
controlled using this product.

Press ui to select “Network Setup”

1

– “Other” – “Zone Management”
from the menu, and then press

ENTER or p.

MANUAL SETUP
OTHER

Net work Standb y
PC Langu age
Fri endly Name Edit
Par ty Mo de

Zon e Man agemen t

Upd ate N otific atio n
Upg rade Notifi cati on

Con trol DENON produc t st atus on sam e ne twor k

Press ui to select the device, and

2

then press ENTER or p.

MANUAL SETUP
ZONE MA NAGEMENT

DEN ON:[A VR-991 ]

NETWORK SETUP

OTHERNETWORK SETUP

Press ui to select “Device Control”,

3

and then press ENTER.

The monitor of the unit displays the network
menu for the target device.

ZONE MA NAGEMENT

MANUAL
DENON:[ AVR-991]

Mod el
Pow er
Sel ect S ource
Vol ume L evel

Dev ice C ontrol

Bro wse t he net work con tent s of target dev ice

OTHERNETWORK

AVR -991
ON
NET /USB

-55 .5dB

ENT ER En ter

RET URN Re turn

Press uio p and ENTER to select

4

the desired track.

DENON:[ AVR-991]

Favorit es

Interne t Radio
Media S erver
iPod
Flickr
Napster
Pandora

MENU

Exit

CH+

Vol. up

• When in device control mode,
is displayed on the television screen of the
controlling device, and is displayed
on the television screen of the device being
controlled.

• For information about how to operate, see the
Owner’s Manual provided with the product.

The zone management function can only be used
on a combination of DENON devices that are
equipped with the zone management function.

NOTE

The volume of the selected device can be controlled
using this unit, but the volume level is not displayed.
Be careful not to increase the volume too high.

[1/8]

REMOTE C ONTROL

CH-

Vol. do wn

Remote control operation

buttons

Move the cursor
(Up/Down/Left/Right)

Confirm the setting