Denon AH-D7000 Service Bulletin

Denon Brand Company, D&M Holdings lnc.
e
The parts of this product are not serviceable. Please replace the product itself. However, spare parts are available for some parts. For details, see "PARTS LIST OF EXPLODED VIEW".
本製品は修理対象外の製品です。 サービス対応は「製品交換」のみとなります。 ただし、一部の部品はスペアパーツを設定します。 詳細は分解図部品表を参照してください。
Ver. 1
SERVICE MANUAL
MODEL JP E3 E2 EK E2A E1C E1K EUT

AH-D7000

333
Over-Ear Headphones
X0397 V.01 DE/CDM 0808

EXPLODED VIEW

1
3
2-1
2-2
2

PARTS LIST OF EXPLODED VIEW

*本表に"nsp" と記載されている部品は供給できません。 * Parts for which "nsp" is indicated on this table cannot be supplied.
*本表に記載されている部品は、補修用部品のため製品に使用している部品とは一部、形状、寸法などが異なる場合があります。 * The parts listed below are for maintenance only, might differ from the parts used in the unit in appearances or dimensions.
Ref. No. Part No. Part Name Remarks Q'ty New
1 nsp AH-D7000 ASSY 480244 1 *
2 nsp EAR PAD ASSY -
2-1 00D 9H3 0001 706 EAR PAD 2P SET 448261 1 *
2-2 00D 9H3 0001 707 POM PLATE 2P SET 442208 1 *
3 nsp WIPING CLOTH 1
2
AH-D7000

REPLACING THE EAR PAD

EAR PAD
POM PLATE
イヤーパッドの交換方法
1. Removing the Ear Pad ASSY
(EAR PAD ASSY : POM PLATE + EAR PAD)
With this structure, the catch on the ear pad assembly's
POM plate is caught in the housing ring's hole to fasten the ear pad assembly in place. For details, see "EXPLODED VIEW".
(1) Pressing down on the ear pad assembly, turn the ear
pad assembly in the direction of the arrow to unlatch the POM plate's catch.
NOTE: The catch may break if the assembly is
turned too strongly.
1. イヤーパッド ASSY のはずしかた
(イヤーパッド ASSY:POMPLATE+EARPAD)
*イヤーパッド ASSY の POMPLATE の爪を HOUSINGRING
の孔にフックさせてイヤーパッド ASSY を固定する構造 です。詳細は分解図 (EXPLODEDVIEW) をご覧ください。
(1) イヤーパッド ASSY を押しつけながらイヤーパッド
ASSY を矢印の方向に回して、POMPLATE の爪の固 定をはずします。
*注意:強く回すと爪が折れる場合があります。
2. Disassembling and assembling the Ear Pad ASSY
(Follow the procedure below in reverse order when reassem­bling.)
(1) Detach the ear pad from the POM plate.
2. イヤーパッド ASSY の分解と組み立て
(組み立てるときは、逆の順序でおこなってください。)
(1) EARPAD を POMPLATE からはずします。
3
AH-D7000
3. Cautions on mounting the Ear Pad
Hanger shaft
HANGER軸受
Opening
開口部
Thin partFront 細い:前側
Thick partRear 太い:後側
* EARPAD の向きは左右対称です。
The ear pad is horizontally symmetrical.
ASSY
The diagram below shows the right side.
(1) After mounting the ear pad assembly, turn only the ear
pad so that the longer part of the ear pad's opening is lined up with the hanger shaft.
3. イヤーパッド ASSY の取り付け時の注意
*下図は右側を示します。
(1) イヤーパッド ASSY の取付後、
長手方向が、HANGER 軸受と同一直線上になるよう
EARPAD
のみを回してくだい。
EARPAD
の開口部の
4
AH-D7000
Loading...