Denon 270, DCM-370 User Manual
STEREO CD PLAYER
DCM-370/270
OPERATING INSTRUCTIONS
MODE D’EMPLOI
INSTRUCCIONES DE OPERACION
OPEN/CLOSE
DISC SKIP
5 DISC AUTOMATIC DISC LOADING SYSTEM
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
DCM-370
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£¢ ON OFF
OPEN/CLOSE
DISC SKIP
5 DISC AUTOMATIC DISC LOADING SYSTEM
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
DCM-270
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
£¢ ON OFF
TRACK
15234
678
9101112
13141516
DISC
MIN
SEC
¤
‚
⁄
‚
‹fi
‚
1
2
3
4
5
TRACK
15234
678
9101112
13141516
DISC
MIN
SEC
¤
‚
⁄
‚
‹fi
‚
1
2
3
4
5
DCM-370
DCM-270
FOR ENGLISH READERS PAGE 05 ~ PAGE 16
POUR LES LECTEURS FRANCAIS PAGE 17 ~ PAGE 28
PARA LECTORES DE ESPAÑOL PAGINA 29 ~ PAGINA 37
2
IMPORTANT TO SAFETY
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION:
1. Handle the power supply cord carefully
Do not damage or deform the power supply cord. If it is damaged or
deformed, it may cause electric shock or malfunction when used. When
removing from wall outlet, be sure to remove by holding the plug
attachment and not by pulling the cord.
2. Do not open the top cover
In order to prevent electric shock, do not open the top cover.
If problems occur, contact your DENON dealer.
3. Do not place anything inside
Do not place metal objects or spill liquid inside the CD player.
Electric shock or malfunction may result.
Please, record and retain the Model name and serial number of your set shown
on the rating label.
Model No. DCM-370/270 Serial No.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
• FOR U.S.A. & CANADA MODEL ONLY
CAUTION
TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG
WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS
THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
• POUR LES MODELES AMERICAINS ET CANADIENS UNIQUEMENT
ATTENTION
POUR PREVENIR LES CHOCS ELECTRIQUES NE PAS UTILISER CETTE
FICHE POLARISEE AVEC UN PROLONGATEUR UNE PRISE DE COURANT
OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT
ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A
DECOUVERT.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
NOTE:
This CD player uses the semiconductor laser. To allow you to enjoy music at a
stable operation, it is recommended to use this in a room of 10°C (50°F) ~
35°C (95°F).
LABELS (for U.S.A. model only)
CERTIFICATION
THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J
APPLICABLE AT DATE OF MANUFACTURE.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED
BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
3
SAFETY INSTRUCTIONS
1. Read Instructions – All the safety and operating
instructions should be read before the appliance is
operated.
2. Retain Instructions – The safety and operating instructions
should be retained for future reference.
3. Heed Warnings – All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions – All operating and use instructions
should be followed.
5. Water and Moisture – The appliance should not be used
near water – for example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a
swimming pool, and the like.
6. Carts and Stands – The appliance should be used only with
a cart or stand that is recommended by the manufacturer.
6A. An appliance and cart
combination should be
moved with care.
Quick stops, excessive
force, and uneven
surfaces may cause
the appliance and cart
combination to overturn.
7. Wall or Ceiling Mounting – The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
8. Ventilation – The appliance should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface that may
block the ventilation openings; or, placed in a built-in
installation, such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings.
9. Heat – The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
10. Power Sources – The appliance should be connected to a
power supply only of the type described in the operating
instructions or as marked on the appliance.
11. Grounding or Polarization – Precautions should be taken so
that the grounding or polarization means of an appliance is
not defeated.
12. Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
appliance.
14. Cleaning – The appliance should be cleaned only as
recommended by the manufacturer.
15. Power Lines – An outdoor antenna should be located away
from power lines.
16. Outdoor Antenna Grounding – If an outside antenna is
connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to
an antenna-discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
See Figure A.
17. Nonuse Periods – The power cord of the appliance should
be unplugged from the outlet when left unused for a long
period of time.
18. Object and Liquid Entry – Care should be taken so that
objects do not fall and liquids are not spilled into the
enclosure through openings.
19. Damage Requiring Service – The appliance should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged;
or
B. Objects have fallen, or liquid has been spilled into the
appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
20. Servicing – The user should not attempt to service the
appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL
ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
4
NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO
• Avoid high temperatures.
Allow for sufficient heat dispersion when
installed on a rack.
• Eviter des températures élevées
Tenir compte d’une dispersion de chaleur
suffisante lors de l’installation sur une étagère.
• Evite altas temperaturas.
Permite la suficiente dispersión del calor
cuando está instalado en la consola.
• Keep the set free from moisture, water, and
dust.
• Protéger l’appareil contre l’humidité, l’eau et
lapoussière.
• Mantenga el equipo libre de humedad, agua y
polvo.
• Do not let foreign objects in the set.
• Ne pas laisser des objets étrangers dans
l’appareil.
• No deje objetos extraños dentro del equipo.
• Do not let insecticides, benzene, and thinner
come in contact with the set.
• Ne pas mettre en contact des insecticides, du
benzène et un diluant avec l’appareil.
• No permita el contacto de insecticidas,
gasolina y diluyentes con el equipo.
• Never disassemble or modify the set in any
way.
• Ne jamais démonter ou modifier l’appareil
d’une manière ou d’une autre.
• Nunca desarme o modifique el equipo de
ninguna manera.
• Unplug the power cord when not using the set
for long periods of time.
• Débrancher le cordon d’alimentation lorsque
l’appareil n’est pas utilisé pendant de longues
périodes.
• Desconecte el cordón de energía cuando no
utilice el equipo por mucho tiempo.
* (For sets with ventilation holes)
• Do not obstruct the ventilation holes.
• Ne pas obstruer les trous d’aération.
• No obstruya los orificios de ventilación.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
• Manipuler le cordon d’alimentation avec
précaution.
Tenir la prise lors du débranchement du
cordon.
• Maneje el cordón de energía con cuidado.
Sostenga el enchufe cuando desconecte el
cordón de energía.
ENGLISH FRANCAIS ESPAÑOL
CAUTION:
At the bottom of the player there are two red shipping screws for use when the
player is transported. Before using the player, turn these screws
counterclockwise and remove them.
If the shipping screws are still in place and the power is turned on, the disc tray
will not open. If this happens, turn off the power, unplug the power cord from
the power outlet and remove the shipping screws.
Retain these screws as they will be needed when the player is transported.
Before transporting the player, take out the discs, close the disc tray, turn off the
power after “0 00 00:00” is displayed and unplug the power cord from the power
outlet. Then install the shipping screws by turning them clockwise. Be sure to
fasten them securely.
ATTENTION:
Au fond du lecteur, se trouvent deux vis de transport rouges, à utiliser lors du
tranport du lecteur. Avant d’utiliser le lecteur, tourner ces vis dans le sens
inverse des aiguilles d’une montre, et les retirer.
Si les vis de transport sont encore en place et l’alimentation allumée, le plateau
de disque ne s’ouvrira pas. Si cela se produit, couper l’alimentation, débrancher
le cordon d’alimentation de la prise de sortie d’alimentation, et retirer les vis de
transport.
Conserver ces vis, car elle seront nécessaires lors d’un transport du lecteur.
Avant de transporter le lecteur, retirer les disques, fermer le plateau de disque,
couper l’alimentation après que “0 00 00:00” ait été affiché, et débrancher le
cordon d’alimentation de la prise de sortie d’alimentation. Puis installer les vis de
transport en les tournant dans le sens des aiguilles d’une montre. Assurez-vous
de les avoir serrées solidement.
PRECAUCION:
En la parte inferior del reproductor hay dos tornillos de transporte para su utilización
durante el transporte. Antes de utilizar el reproductor, gire estos tornillos en sentido
contrario a las agujas del reloj y extráigalos.
Si se activa la alimentación y los tornillos de transporte todavía están en su sitio, la
bandeja de discos no se abrirá. Si ocurriera esto, desconecte el cable de alimentación
de la toma de red eléctrica general y extraiga los tornillos de transporte.
Guarde estos tornillos ya que serán necesarios cuando se transporte el reproductor.
Antes de transportar el reproductor, saque los discos, cierre la bandeja de discos,
desactive la alimetnación después de que se visualice “0’ 00 00:00” y desconecte el
cable de alimentación de la toma de red. A continuación proceda a instalar los
tornillos de transporte girándolos en el sentido de las agujas del reloj. Asegúrese de
fijarlos firmemente.
5
ENGLISH
Thank you for purchasing the DENON compact disc player. Read the Operating
Instructions thoroughly, and operate this player properly.
— TABLE OF CONTENTS —
FEATURES ……………………………………………………………………………5
CAUTIONS DURING USE …………………………………………………………5
NAMES OF PARTS AND THEIR FUNCTIONS …………………………………6, 7
OPENING AND CLOSING THE DRAWER AND
LOADING A DISC ………………………………………………………………8
CONNECTIONS ………………………………………………………………………9
NORMAL PLAY ………………………………………………………………………9
OTHER PLAY METHODS………………………………………………………10~13
INSTALLATION PRECAUTIONS …………………………………………………14
PLAY USING THE REMOTE CONTROL UNIT ………………………………14, 15
COMPACT DISCS …………………………………………………………………16
TROUBLE? CHECK THE PLAYER TO FIND
WHAT’S WRONG ………………………………………………………………16
SPECIFICATIONS ……………………………………………………………………16
In addition to the CD Player unit, please check to make sure the following
items are included in the packing box.
(1) Operating Instructions ……………………………………………………1
(2) Connection Cords …………………………………………………………1
(3) Remote Control Unit RC-258 ……………………………………………1
(4) R6P (AA size) Dry batteries ………………………………………………2
FEATURES
(1) HDCD®(High Definition Compatible Digital) decoder (DCM-
370)
HDCD is an encoding/decoding technology that greatly reduces the
distortion occurring at the time of digital recording while maintaining
compatibility with the conventional CD format. HDCD allows 20-bit data to
be converted into the 16-bit data of current CDs with no loss in sound
quality.
The use of this HDCD decoder makes it possible to achieve the high
resolution and low distortion characteristic of HDCD when playing HDCDcompatible discs, and DENON’s digital technology optimizes the high
sound quality possibilities of HDCD technology. Furthermore, normal CDs
and HDCD-compatible CDs are automatically identified, and the optimum
digital signal processing for that type of disc used.
(2) High performance digital filter
The DCM-370/270 uses high precision 8-times oversampling digital filters.
(3) Simple Playback of 8cm CD Singles
8cm CD singles can be played without using an adaptor.
(4) Programming of up to 32 tracks
All of the tracks on a CD can be programmed to play in any order.
Programming in units of discs (all tracks on a disc) is also possible.
(5) Newly developed carousel-type changer mechanism
included
This mechanism can house five discs, and while one disc is playing the
remaining four discs can be changed. In addition, the carousel can be
rotated either clockwise or counterclockwise, so searching between discs
is fast.
(6) Wireless Remote Control Accessory
In addition to general operations such as Play, Stop and Pause, this
remote control unit enables direct selection, direct programming, and
other functions. Use of the remote control unit adds greatly to the
operating ease of the DCM-370/270, enhancing its outstanding features.
CAUTIONS DURING USE
• This compact disc player is capable of playing discs
which have the mark at right.
• During track selection, during search and when the
player sustains a strong impact, the disc’s rotational
speed changes greatly, causing a small noise to be
emitted. This is not a malfunction of the player.
• If the CD player is operated while an FM or AM broadcast is being received,
there may be noise in the FM or AM reception. Please switch the power to
the CD player off at such times.
• The DCM-370/270 has a broad dynamic range. Please exercise caution
when turning up the volume on the amplifier in cases when the playback
volume is low. If the volume is turned up too high, it could damage the
speakers.
• Do not use any discs but exclusive audio discs with this CD player.
• Placing this player or its connection cords near a TV or other audio device
could cause a humming sound to be emitted. If this occurs, relocate the
player or reroute the connection cords.
• Be sure to remove the disc from the player before moving it. The disc could
be damaged if left in the player while it is being moved.
• Do not place any object in the tray in the position where the disc is loaded,
or open and close the tray with anything inside. Foreign objects in the tray
could damage the play mechanism.
• Do not move the player from a cold place to a warm place suddenly. If the
player is cold when brought into a warm room, condensation could form,
preventing proper operation of the player. If condensation does form on the
player when it is brought into a warm room, wait at least 30 minutes before
use.
CAUTION:
1. Always remove all discs from the trays when moving the set. Failure to do
so may damage the set.
2. When the power is turned off, the varied level will be cleared and be set to
0 dB.
C
IMPORTANT
(CANADIAN MODEL ONLY)
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus setout in the Radio Interference
Regulations of the Canadian Department of Communication.
6
ENGLISH
NAMES OF PARTS AND THEIR FUNCTIONS
FRONT PANEL
REAR PANEL
OPEN/CLOSE
DISC SKIP
5 DISC AUTOMATIC DISC LOADING SYSTEM
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
DCM-370
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£¢ ON OFF
qwertyuio!0 !1
!5
!4
!3 !2
TRACK
15234
678
9101112
13141516
DISC
MIN
SEC
¤
‚
⁄
‚
‹fi
‚
1
2
3
4
5
COAXIAL
DIGITAL OUT
LINE OUT
VARIABLE
CONTROL
OUT
IN
SYNCHRO
!7 !8
@0
@1
!9
OPEN/CLOSE
DISC SKIP
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
5 DISC AUTOMATIC DISC LOADING SYSTEM
DCM-370
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£¢ON OFF
TRACK
15234
678
9101112
13141516
DISC
MIN
SEC
¤
‚
⁄
‚
‹
fi
‚
1
2
3
4
5
!6
DISPLAY
PROGRAM
RANDOM
TRACK
R
15234
678
9101112
13141516
DISC
MIN
SEC
REPEAT ALL
1
DISC
REMAIN
°
°
°
°
°°
°
1
2
3
4
5
CAROUSEL
Play Indicator
Pause Indicator
Disc Indicator
Disc Number
Track Number
Time
minute
second
Repeat Indicator
Random Indicator
Program Indicator
Remote control signal
Receive Indicator
16-track music calendar
DCM-370 only
DCM-370 only
7
ENGLISH
q
Power Switch (POWER)
• Press this button to switch on the power.
w
Remote Control Receptor (REMOTE SENSOR)
• This receptor receives infrared signals from the wireless remote
control unit.
• Aim the wireless remote control unit at this receptor window when
operating it.
e
HDCD Indicator (DCM-370 only)
• This lights when an HDCD-compatible disc is playing.
r
Display Window
• The Disc No., Track No., playing time and other information are
displayed in the display window.
t
Repeat Button (REPEAT)
• Press this button for repeated playback. The indicator
appears on the display. The following three types of repeat modes are
available.
• When pressed once, the and indicators light and the track
currently playing is repeated.
• When pressed again, the and indicators light and all
the tracks on the disc currently playing are repeated.
• When pressed again, the , and indicators light
and all the discs currently set on the tray are repeated.
• When pressed again, the
,
and indicators turn off
and the repeat mode is cancelled.
The repeat function can also be used during programmed and random
playback, but in this case only the all repeat ( and
indicator) mode is available.
(Refer to page 11 for details.)
y
Program Button (PROG)
• Press this button when you want to enter tracks for programmed
playback. (Refer to page 10 for details.)
u
Automatic/Manual Search Reverse Button
(
8/6)
• Press this button to return the pickup to the beginning of the present
track. Press again to return to other tracks.
• By pressing the button a number of times, the pickup will move back
the corresponding number of tracks.
• Keep on pressing this button for more than 0.5 seconds during
playback for fast reverse search. As long as the button is kept
pressed, music signals are played back faster than normal.
• Keep on pressing this button for more than 5 seconds, reverse search
becomes approximately 4 times faster.
i
Automatic/Manual Search Forward Button
(
7/9)
• Press this button to move the pickup forward to the beginning of the
next track. Press again to move ahead to other tracks.
• By pressing the button a number of times, the pickup will advance the
corresponding number of tracks.
• Keep on pressing this button for more than 0.5 seconds during
playback for fast forward search. As long as the button is kept
pressed, music signals are played back faster than normal.
• Keep on pressing this button for more than 5 seconds, forward search
becomes approximately 4 times faster.
o
Stop Button (2 STOP)
• Press this button to stop play.
DISCALL
DISCALLREPEAT
DISCALLREPEAT
1 DISCREPEAT
1REPEAT
REPEAT
!0
Pause Button (3 PAUSE)
• Press this button to stop play temporarily.
• Pressing the Pause button during play stops play temporarily. The
indicator goes off and the indicator lights up.
• To cancel the Pause state, press either the Play button
!1 or the
Pause button
!0 a second time.
!1
Play Button (1 PLAY)
• Press this button to play a disc.
The indicator lights up when the button is pressed, the number of
the disc and the track being played is displayed by the Disc Number
and Track No. indicator, and the amount of elapsed time for the
current track is displayed by the Time indicator.
• The indicator goes off after playing of the final track of the final
disc is finished and the player stops.
!2
Disc Skip Button (DISC SKIP)
• Each time this button is pressed, the carousel will rotate in a
clockwise direction to the next tray position. This allows for loading or
unloading of discs.
This button is also used to select the next disc, in the normal play
continuously.
!3
Open/Close Button (5 OPEN/CLOSE)
• Press this button when opening.
• The drawer is opened toward the front.
• Press the button again to close the drawer.
!4
Loading Drawer
• Discs can be loaded and unloaded when this drawer is open. Do not
force the drawer closed by hand.
!5
Headphone Jack (PHONES)
• Insert the jack of the headphones when desiring to listen to a disc
privately. (Headphones are sold separately.)
!6
Disc Trays (1 ~ 5)
• One disc per tray can be loaded.
!7
Output Terminal (LINE OUT)
• Connect the connection cords from these terminals to the amplifier’s
input terminals. (Refer to page 9 for connections.)
!8
SYNCHRO Jack (SYNCHRO)
• To make a synchronized recording, this jack must be connected to the
SYNCHRO jack of the deck with a connection cord. (Refer to page 9
for connections.)
!9
Control Input Connector (CONTROL IN) (DCM-370 only)
• This is the input connector for wired remote control.
Consult your DENON dealer if you wish to use this connector.
@0
Control Output Connector (CONTROL OUT)
(DCM-370 only)
• This is the output connector for wired remote control.
Consult your DENON dealer if you wish to use this connector.
@1
Digital Audio Output Connector (COAXIAL)
(DCM-370 only)
• Connect a commercially available 75 Ω/ohms pin-plug cord.
• Digital data is output from this connector.
1
1
3
1
Continuous Button Operation
If the automatic/manual search reverse button
u or the automatic/manual
search forward button
i are held in, the function of that button will be
repeated.
8
ENGLISH
OPENING AND CLOSING THE DRAWER AND LOADING A DISC
Opening and closing the drawer (This operation only works while the power
is on.)
1. Press the power switch (POWER) to turn on the power.
2. Press the open/close button (
5 OPEN/CLOSE).
How to load a disc
• Make sure the drawer is completely open.
• Hold the disc by the edges and place it on the disc tray. (Do not touch the
signal surface, i.e., the glossy side.)
• Set the disc properly in the tray according to its size.
Set 8 cm discs in the center hole.
Set 12 cm discs in the outer hole.
• When the drawer is opened during the stop mode, discs can be loaded in
the 3 disc trays. If the DISC SKIP button is pressed, the carousel turns and a
disc can be loaded in the another disc tray.
When the drawer is opened during the play mode, it is possible to load and
unload discs in all of the disc trays other than the one whose disc is
currently playing. 3 discs can be replaced and press the DISC SKIP button to
switch the other disc tray that can be replaced.
• Press the open/close button (
5 OPEN/CLOSE) to close the drawer.
Caution:
• The player will not operate properly and the disc may even be damaged if it
is not set correctly.
• If your finger should get caught in the drawer when it closes, press the
open/close button (
5 OPEN/CLOSE).
• Do not place any foreign objects on the disc tray, and do not place more
than one disc on the tray at a time. Otherwise malfunction may occur.
• Do not push in the disc tray manually when the power is off as this may
cause malfunction and damage the CD player.
• Do not touch the carousel while it is turning. Also, do not turn the carousel
by hand when it is stopped. Doing so could damage it.
• Do not insert disc where indicated by arrow.
This could damage the internal mechanism in the unit.
OPEN/CLOSE
DISC SKIP
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
5 DISC AUTOMATIC DISC LOADING SYSTEM
DCM-370
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£¢ON OFF
TRACK
15234
678
9101112
13141516
DISC
MIN
SEC
¤
‚
⁄
‚
‹
fi
‚
1
2
3
4
5
OPEN/CLOSE
DISC SKIP
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
5 DISC AUTOMATIC DISC LOADING SYSTEM
DCM-370
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£¢ON OFF
TRACK
15234
678
9101112
13141516
DISC
MIN
SEC
¤
‚
⁄
‚
‹
fi
‚
1
2
3
4
5
OPEN/CLOSE
DISC SKIP
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
5 DISC AUTOMATIC DISC LOADING SYSTEM
DCM-370
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£¢ON OFF
TRACK
15234
678
9101112
13141516
DISC
MIN
SEC
¤
‚
⁄
‚
‹fi
‚
1
2
3
4
5
OPEN/CLOSE
DISC SKIP
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
5 DISC AUTOMATIC DISC LOADING SYSTEM
DCM-370
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£¢ON OFF
TRACK
15234
678
9101112
13141516
DISC
MIN
SEC
¤
‚
⁄
‚
‹
fi
‚
1
2
3
4
5
LABEL SIDE
UP WARD
9
ENGLISH
CONNECTIONS
(1) Connecting the Output Terminal
• Connect one end of the connection cord supplied with the CD Player to
the output terminals, left (L) and right (R) of the CD Player, and the other
end to the CD, AUX or TAPE PLAY input terminals, left (L) and right (R), of
the amplifier.
(3) SYNCHRO Jack Connections
• Connect the SYNCHRO jack with a DENON cassette deck which is
equipped with a SYNCHRO jack, then make a synchronized recording. Use
the connection cord supplied with the cassette deck.
• To make use of this function, also connect the output jacks and make the
settings so that a recording can be made from the CD player to the
cassette deck.
COAXIAL
DIGITAL OUT
LINE OUT
VARIABLE
CONTROL
OUT
IN
SYNCHRO
AC OUTLET
PHONO CD TUNER AUX
TAPE-1
/DAT
TAPE-2
/MD
TAPE-1
/DAT
TAPE-2
/MD
L
R
PB REC
SIGNAL
GND
INPUTS
L
R
RL
SPEAKER SYSTEMS
A
B
(Amplifier)
Power supply outlet
DCM-370/270
OPEN/CLOSE
DISC SKIP
5 DISC AUTOMATIC DISC LOADING SYSTEM
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
DCM-370
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£¢ON OFF
TRACK
15234
678
9101112
13141516
DISC
MIN
SEC
¤
‚
⁄
‚
‹fi
‚
1
2
3
4
5
( 1 PLAY )
NORMAL PLAY
Follow the steps below to get an understanding of the disc play
procedure.
1. Turn the power switch on and press the open/close (
5 OPEN/CLOSE)
button to open the drawer.
2. Set the disc to be played in the front side tray.
3. Press the play button (
1).
4. The drawer closes and the disc just loaded is played.
5. The disc number, track number and elapsed time, etc., for the disc
currently playing appear on the display window.
6. If the open/close (
5 OPEN/CLOSE) button is pressed while a disc is
playing, playback continues, but the drawer opens and four discs can be
replaced. The disc that can be replaced switches when the DISC SKIP
button is pressed.
Press the open/close (
5 OPEN/CLOSE) button again to close the drawer.
(1) Starting Playback
(2) Stopping Playback
OPEN/CLOSE
DISC SKIP
5 DISC AUTOMATIC DISC LOADING SYSTEM
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
DCM-370
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£¢ON OFF
TRACK
15234
678
9101112
13141516
DISC
MIN
SEC
¤
‚
⁄
‚
‹fi
‚
1
2
3
4
5
( 2 STOP )
1. Press the stop button (2 STOP) to stop playback.
2. To replace discs, press the open/close (
5 OPEN/CLOSE) button.
The disc which was playing switches over to the front side and the drawer
opens.
OPEN/CLOSE
DISC SKIP
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
5 DISC AUTOMATIC DISC LOADING SYSTEM
DCM-370
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£¢ ON OFF
TRACK
15234
678
9101112
13141516
DISC
MIN
SEC
¤
‚
⁄
‚
‹
fi
‚
1
2
3
4
5
• Set the disc you want to
played in the front side.
COAXIAL
DIGITAL OUT
LINE OUT
VARIABLE
CONTROL
OUT
IN
SYNCHRO
(Cassette Deck)
Power supply outlet
DCM-370/270
(2) Connecting the Digital Output Jack (COAXIAL) (DCM-370 only)
• Use a 75 Ω/ohm pin cord to connect the digital output jack (COAXIAL) of
the DCM-370 to the digital input jack (COAXIAL) on a digital processor or
MD recorder, available in stores.
COAXIAL
DIGITAL OUT
LINE OUT
VARIABLE
CONTROL
OUT
IN
SYNCHRO
DIGITAL INPUT
COAXIAL
OPTICAL
Power supply outlet
DCM-370/270
Digital processor or MD recorder
10
ENGLISH
OTHER PLAY METHODS
In addition to normal play, the following methods can be used when playing a disc.
q To Play the Desired Disc and
Desired Track ………………………………………………
Direct Selection
(Remote control only)
1
3
2
( DISC SELECT )
( 1 ~ 10 )
( 1 ~ 5 )
1. Press the DISC SELECT button.
2. Use the number buttons (1 to 5) to select the number of the disc to be
played.
3. Next, use the number buttons (1 to 10 and +10) to select the number of
the track to be played.
• For example, to play the 4th track on the 3rd disc:
Press , and .
To play the 12th track on the 5th disc:
Press , , and .
Playback begins from the number of the disc and track selected.
2+105DISC SELECT
43DISC SELECT
w To Move to the Next Disc
During Playback ……………………………………………………
Disc Skip
1. Press the disc skip button. The carousel in the drawer turns and the disc on
the next tray is played.
For example, if disc number 3 was playing, the disc switches to disc
number 4, and if disc number 5 was playing, the disc switches to disc
number 1.
2. In addition, when the Disc Skip – button on the remote control unit is
pressed, the carousel turns in the opposite direction and the previous disc
is played.
( DISC SKIP – )
e To Move to the Next Track
during Play ………………………………………………
Automatic Search
Press the Automatic/Manual search forward button (7/9) for less than 0.5
seconds during playback.
• The pickup will advance to the beginning of the next track and playback will
continue. Pressing the button several times will forward the pickup the
corresponding number tracks.
OPEN/CLOSE
DISC SKIP
5 DISC AUTOMATIC DISC LOADING SYSTEM
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
DCM-370
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£¢ON OFF
TRACK
15234
678
9101112
13141516
DISC
MIN
SEC
¤
‚
⁄
‚
‹fi
‚
1
2
3
4
5
( 7/9 )
Press the 7/9 button.
2nd Track
3rd Track 4th Track
• During Random or Program operation, player moves to the beginning of the
next random or program track selection.
r To return to the beginning of the
track now being played ………………………………
Automatic Search
Press the Automatic/Manual search reverse button (8/6) for less than 0.5
seconds during playback.
• The pickup will return to the beginning of the current track and playback will
continue. Pressing the button several times will return the pickup the
corresponding number tracks.
Press the 8/6 button.
3rd Track
4th Track 5th Track
t To Play the Desired Discs and
the Desired Tracks in the
Desired Order …………………………………………
Program Selection
• You can play certain tracks on the loaded discs in any order.
• Tracks on a disc not loaded can also be programmed, but if you try to play
that disc, the microprocessor detects that it is not loaded and the following
disc is played automatically.
• Up to 32 tracks can be set in a program.
HDCD
DCM-370
REMOTE
SENSOR
1
TRACK
2
3
DISC
4
5
¤
‚
5 DISC AUTOMATIC DISC LOADING SYSTEM
15234
MIN
SEC
678
9101112
‹fi
13141516
‚
‚
⁄
PROG
REPEAT
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
£¢ON OFF
PHONES
STOP
PAUSE
PLAY
OPEN/CLOSE
DISC SKIP
( DISC SKIP )
HDCD
DCM-370
REMOTE
SENSOR
1
TRACK
2
3
DISC
4
5
¤
‚
5 DISC AUTOMATIC DISC LOADING SYSTEM
15234
MIN
SEC
9101112
‹fi
13141516
‚
⁄
‚
678
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
£¢ON OFF
PHONES
REPEAT
PROG
PAUSE
STOP
PLAY
OPEN/CLOSE
DISC SKIP
( 8/6 )
11
ENGLISH
(1) Programming (when using the remote control unit)
2
4
3
1
( PROG / DIRECT )
( DISC SELECT )
( 1 ~ 10 )
( 1 ~ 5 )
• Press the PROG/DIRECT button. The indicator lights. Use the
DISC SELECT, number and +10 buttons to select the disc to be
programmed.
For example, to program the 3rd track on the 2nd disc and the 12 track on
the 5th disc, press , , , , , ,
and .
2+10
5DISC SELECT32DISC SELECTPROG/DIRECT
PROGRAM
(2) Programming (when using the buttons on the main unit)
OPEN/CLOSE
DISC SKIP
5 DISC AUTOMATIC DISC LOADING SYSTEM
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
DCM-370
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£¢ON OFF
TRACK
15234
678
9101112
13141516
DISC
MIN
SEC
¤
‚
⁄
‚
‹fi
‚
1
2
3
4
5
( PROG )
• Press the PROGRAM (PROG) button. The indicator flashes. Use
the DISC SKIP, Automatic/Manual search reverse (
8 /6 ),
Automatic/Manual search forward (
7/9) buttons to select the disc to
be programmed.
For example, to program the 3rd track on the 2nd disc and the 12 track on
the 5th disc, press the PROGRAM (PROG) button, DISC SKIP button to
select the 2nd disc, Automatic/Manual search reverse (
8/ 6) or
Automatic/Manual search forward (
7/9) button to select the 3rd track,
then press the PROGRAM (PROG) button.
In the same way, select the 12th track on the 5th disc using the DISC SKIP
and Automatic/Manual search buttons, then press the PROGRAM (PROG)
button.
PROGRAM
(3) To Check the Programmed Tracks (Remote control only)
( CALL )
• Press the call button on the wireless remote control unit.
The contents of the program are displayed in order one item at a time each
time the Call button is pressed.
(4) To Play a Program
OPEN/CLOSE
DISC SKIP
5 DISC AUTOMATIC DISC LOADING SYSTEM
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
DCM-370
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£¢ON OFF
TRACK
15234
678
9101112
13141516
DISC
MIN
SEC
¤
‚
⁄
‚
‹fi
‚
1
2
3
4
5
( 1 PLAY )
( 1 PLAY )
• Press the Play (1 PLAY) button to play the programmed selections in the
order in which they were programmed.
(5) To clear the entire program
• Pressing the PROG/DIRECT button once more erases the entire program.
Pressing the open/close (
5 OPEN/CLOSE) button also erases the contents
of a program.
• Pressing the PROG/DIRECT button while a program is being played cancels
the program. Play will then be continuous to the end of the disc currently
being played, after which the player will stop automatically.
Cautions
• If a program is run during playing of a track or from the Pause state, the
track which is currently being played becomes the 1st track in the program.
• Direct selection cannot be done while a program is being played. Inputting
the track number of a desired track with the Track Number buttons adds the
input track to the end of the program.
• When programming, do not program a track number which is not recorded
on the disc. If such a number is programmed by mistake, the player ignore
the program.
y To Repeat Play of All Tracks …………………………………
Repeat Play
• Press the Repeat (REPEAT) button. The indicator will light up.
※ Steps q and w can be done in any order, with the same results.
REPEAT
• When the repeat button is pressed once, the and indicators
light. In this mode, the track currently playing is repeated.
1REPEAT
Track
Track Track
PAUSE
STOP
OPEN/CLOSE
PLAY
DISC SKIP
2
( 1 PLAY )
HDCD
DCM-370
REMOTE
SENSOR
1
TRACK
2
3
DISC
4
5
¤
‚
⁄
5 DISC AUTOMATIC DISC LOADING SYSTEM
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
£¢ON OFF
PHONES
PROG
REPEAT
15234
MIN
SEC
678
9101112
‹fi
13141516
‚
‚
1
( REPEAT )
REPEAT
REPEAT
1
12
ENGLISH
• If the repeat button is pressed again, the and indicators
light, and the disc currently playing is repeated.
1 DISCREPEAT
1st disc
(ALL TRACKS)
2nd disc
(ALL TRACKS)
5th disc
(ALL TRACKS)
• If the repeat button is pressed again, the , and
indicators light, and all the discs currently loaded are repeated.
DISCALLREPEAT
1st disc
(ALL TRACKS)
2nd disc
(ALL TRACKS)
5th disc
(ALL TRACKS)
• Pressing the Repeat (REPEAT) button during play will also cause the player
to repeat play (of all tracks).
• To cancel repeat play, press the Repeat (REPEAT) button once more.
• Pressing the Repeat (REPEAT) button while a program is being played will
cause the tracks in the program to be played again in order.
• Pressing the Repeat (REPEAT) button during Random play will cause the
tracks to be played again at random.
u Letting the Player Select the
Order of Play …………………………………………………
Random Play
(Remote control only)
(1) Full Random Play
1
2
( 1 PLAY )
( RANDOM )
• Press the Random button, then press the Play button. The microcomputer
will then start play of the tracks on the 5 discs at random.
(2) Program Random Play
5
3
4
6
1
2
( 1 PLAY )
( RANDOM )
( PROG / DIRECT )
( DISC SELECT )
( 1 ~ 5 )
( 1 ~ 10 )
• After pressing the PROG/DIRECT button and inputting a program (See item
t on page 10 and 11), press the Random button, then the Play button. The
microcomputer will then select tracks from the program at random and play
them.
(3) Disc Sequential Random Play
1
3
4
2
( 1 PLAY )
( RANDOM )
( DISC SELECT )
( 1 ~ 5 )
• Press the RANDOM button and specify the disc numbers (1 to 5) with the
DISC SELECT button and the number buttons. A press of the PLAY (
1
PLAY) button will result in the player randomly selecting and playing tracks
on the disc in the order of specified discs.
Up to 5 discs can be selected, and the same disc can be selected, two or
more times. Disc sequential random play is cancelled when play ends.
(4) To Cancel Random Play
• Pressing the Random button once more cancels the Random function. Play
will then proceed from the track currently being played to the end of the last
track on the disc, then stop.
Pressing the open/close (
5 OPEN/CLOSE) button also cancels the Random
function.
Cautions
• Pressing the Random button during normal play starts full random play.
• Pressing the Random button during Program play starts random play of the
tracks in the program, including the tracks which have already been played.
• During random play, the player may display the number of disc which is not
loaded in the tray. In such a case, the player will read the disc information,
then reset automatically to correct. This is not a malfunction.
REPEAT
REPEAT
REPEAT
REPEAT
1 DISC
ALL DISC
Loading...